• Journal of Astronomy and Space Sciences
• /
• v.26 no.4
• /
• pp.667-676
• /
• 2009

The payload can be classified as a passive and active type. Generally radar satellite to acquire specific information through various radar images will use the SAR (Synthetic Aperture Radar) as active type payload. the principal of SAR satellite is to receive the signal returned from certain objects and/or surfaces in order to construct an radar image. The data acquired from the satellite in its real orbit shall be needed to perform successful CAL/VAL (Calibration & Validation) because the SAR satellite have to receive the returned signal for SAR image construction. In order to do the above, the returned signal shall be related to ground targets. Especially ground target is the corner reflector (CR) for CAL/VAL. Generally the reflector has various types and shapes. Their selection can be dependent on characteristics and mission objectives of SAR satellite. In this paper, reflector focused on the optimal case and effective case has been studied and then the trihedral corner reflector under this study has been designed and its performance also analyzed.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.12
• /
• pp.865-873
• /
• 2019

To improve the survivability of a missile, it needs to be lowered that the detection possibility by radars on the ground. The radar exposure of the target is given as a function of relative distance from the radar to the target and RCS (Radar Cross Section). The RCS of the missile is determined by the incidence angle of the target to electromagnetic radiation emitted from the radar. Under the assumption that the missile equips appropriate attitude control system, the attitude of the missile to minimize radar exposure at a high altitude is investigated in this paper. Two different types of performance cost are considered: the total sum of RCS and the total sum of SNR during the flight. Optimal solutions against multiple ground radars are found by using a SQP (Sequential Quadratic Programming)-based optimization technique.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.4
• /
• pp.695-704
• /
• 2018

The rainfall cases were identified by rainfall estimation techniques which were developed by using X - band marine radar. A digital signal converter was used to convert the signal received from the marine radar into digital reflectivity information. The ground clutter signal was removed and the errors caused by beam attenuation and beam volume changes were corrected. The reflectivity showed a linear relationship with the rain gauge rainfall. Quantitative rainfall was estimated by converting the radar signal into an cartesian coordinate system. When the rainfall was recorded more than $5mm\;hr^{-1}$ at three automatic weather stations, the rain cell distribution on the marine radar was consistent with that of the weather radar operated by Korea meteorological Adminstration.

• Journal of Satellite, Information and Communications
• /
• v.7 no.1
• /
• pp.75-81
• /
• 2012

This study is to design the transmitter and receiver of short range UWB(Ultra Wide Band) imaging radar that is able to display high resolution radar image for front area of a UGV(Unmanned Ground Vehicle). This radar can help a UGV to navigate autonomously as it detects and avoids obstacles through foliage. The transmitter needs two transmitters to improve the azimuth resolution. Multi-channel receivers are required to synthesize radar image. Transmitter consists of high power amplifier, channel selection switch, and waveform generator. Receiver is composed of sixteen channel receivers, receiver channel converter, and frequency down converter, Before manufacturing it, the proposed architecture of transceiver is proved by modeling and simulation using several parameters. Then, it was manufactured by using industrial RF(Radio Frequency) components and all other measured parameters in the specification were satisfied as well.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.30 no.1
• /
• pp.79-87
• /
• 2019

Radar detection range is decreased with an increase in the noise levels and detection thresholds in adaptive CFAR of a radar signal processor to the weather clutter reflection signal in the rain. When a high-velocity plot is generated in weather clutter, what are detected are not targets but false plots. Detection opportunity is reduced by radar time resource consumption from additional confirmations regarding the false plots. In this paper, the received signals are saved using a radar-received signal storage device. Based on the analysis of the received signals from weather clutter, the influence of the rainfall reflection has been mitigated by front-end attenuation of the signal processor. The improvement in the detection performance is verified through received signal and simulation results.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.6
• /
• pp.657-662
• /
• 2008

Inter-radar interferences may cause the critical impact to the radar detection performance because radar operates with high power and wideband. In this paper, the international criteria for radar interference protection is reviewed based on the ITU-R recommendation, and the radar interference analysis model is presented by taking into account the radar operating environments such as ground, airborne and spaceborne radars. Finally, the simulation results are presented with the interference Impact analysis in various radar environments.

• Journal of Korea Multimedia Society
• /
• v.20 no.2
• /
• pp.153-162
• /
• 2017

Today, weather radar is used as a key tool for modern high-tech weather observations and forecasts, along with a wide variety of ground gauges and weather satellites. In this paper, we propose a frequency transform based weather radar image processing technique to improve the weather radar image damaged by beam blocking and clutter removal in order to minimize the uncertainty of the weather radar observation. In the proposed method, DCT based mean energy correction is performed to improve damage caused by beam shielding, and DWT based morphological image processing and high frequency cancellation are performed to improve damage caused by clutter removal. Experimental results show that the application of the proposed method to the damaged original weather radar image improves the quality of weather radar image adaptively to the weather echo feature around the damaged area. In addition, radar QPE calculated from the improved weather radar image was also qualitatively confirmed to be improved by the damage. In the future, we will develop quantitative evaluation scales through continuous research and develop an improved algorithm of the proposed method through numerical comparison.

• Korean Journal of Remote Sensing
• /
• v.36 no.3
• /
• pp.441-448
• /
• 2020

GMTI (Ground Moving Target Indication) radar system can detect ground moving targets and can provide position and velocity information of each target. However, the azimuth position of target has some offset because of the hardware errors such as mechanical tolerances. In this case, an error occurs no matter how accurate the monopulse ratio is. In this paper, target position correction method in azimuth direction has been proposed. The received sum and difference signals of monopulse GMTI system are post-processed to correct the target azimuth angle error. This method is simple and adaptive for nonhomogeneous area because it can be implemented by using only software without any hardware modification or addition.

• Geophysics and Geophysical Exploration
• /
• v.7 no.1
• /
• pp.88-92
• /
• 2004

To improve the recovery rate of unlocated buried human remains in forensic investigations, there is scope to evaluate and develop techniques that are applicable to the Australian environment. I established controlled gravesites (comprising shallow buried kangaroos, pigs, and human cadavers) in South Australia, to allow the methodical testing of remote sensing equipment for the purpose of grave detection in forensic investigations. Eight-month-old pig graves are shown to provide more distinct identifying results using ground-penetrating radar when compared to four-year-old kangaroo graves. Two further aspects of this research are presented: information (obtained from a survey) relating to the police use of geophysical instruments for locating buried human remains, and the use of electrical resistivity for locating human remains buried in a coffin. The survey of Australian police jurisdictions, covering the period 1995-2000, showed that police searches for unlocated bodies have not successfully located human remains using any geophysical instruments (such as ground-penetrating radar, magnetometers, or electrical resistivity). Lower resistivity readings were found coincident with the 150-year-old single historical burial in a heavily excavated field, in a situation where its exact location was previously unknown.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.3
• /
• pp.509-516
• /
• 2011

In this paper, a ground penetrating radar(GPR) system is implemented for landmine detection. The performance of the GPR system is associated with the characteristics of local soil and buried target. The choice of the center frequency and the bandwidth of the GPR system are the key factors in the GPR system design. To detect a small and shallow target, the higher frequencies are needed for high depth resolution. We have been designed, fabricated and tested a new impulse generator using step recovery diodes. The measured impulse response has an amplitude of 6.2V and a pulse width of 250ps. The implemented GPR system has been tested real environmental conditions and has proved its ability to detect a small buried target.