• Journal of the Korean Association of Geographic Information Studies
• /
• v.14 no.1
• /
• pp.84-93
• /
• 2011

Levee line mapping is critical to the protection of environments in river zones, the prevention of river flood and the development of river zones. Use of the remote sensing data such as LiDAR and aerial orthoimage is efficient for river mapping due to their accessibility and higher accuracy in horizontal and vertical direction. Airborne laser scanning (LiDAR) has been used for river zone mapping due to its ability to penetrate shallow water and its high vertical accuracy. Use of image source is also efficient for extraction of features by analysis of its image source. Therefore, aerial orthoimage also have been used for river zone mapping tasks due to its image source and its higher accuracy in horizontal direction. Due to these advantages, in this paper, research on three dimensional levee line mapping is implemented using LiDAR and aerial orthoimage separately. Accuracy measurement is implemented for both extracted lines generated by each data using the ground truths and statistical comparison is implemented between two measurement results. Statistical results show that the generated 3D levee line using LiDAR data has higher accuracy than the generated 3D levee line using aerial orthoimage in horizontal direction and vertical direction.

• Tunnel and Underground Space
• /
• v.25 no.5
• /
• pp.462-469
• /
• 2015

This study carried out a topographic survey at a small-scale open-pit limestone mine in Korea (the Daesung MDI Seoggyo office) using a popular rotary-wing unmanned aerial vehicle (UAV, Drone, DJI Phantom2 Vision+). 89 sheets of aerial photos could be obtained as a result of performing an automatic flight for 30 minutes under conditions of 100m altitude and 3m/s speed. A total of 34 million cloud points with X, Y, Z-coordinates was extracted from the aerial photos after data processing for correction and matching, then an orthomosaic image and digital surface model with 5m grid spacing could be generated. A comparison of the X, Y, Z-coordinates of 5 ground control points measured by differential global positioning system and those determined by UAV photogrammetry revealed that the root mean squared errors of X, Y, Z-coordinates were around 10cm. Therefore, it is expected that the popular rotary-wing UAV photogrammetry can be effectively utilized in small-scale open-pit mines as a technology that is able to replace or supplement existing topographic surveying equipments.

• Korean Journal of Environmental Agriculture
• /
• v.30 no.1
• /
• pp.9-15
• /
• 2011

BACKGROUND: This study was conducted to evaluate the effects of the fertilizer sources and ground cover mulches on nutrient release, growth, and photosynthesis in small one-year-old apple (Malus ${\times}$ domestica Borkh.) trees in controlled conditions. METHODS AND RESULTS: Treatments included no fertilizer (NF), commercial organic fertilizer (CF), and poultry litter (PL) for fertilizer treatments, and wood chips (WC), shredded paper (SP), green compost (GC), and grass clippings (GR) for cover mulch treatments. All treatments were applied proportionally based on the volume ratio equivalent to the soil. CF, PL, and GR treatments that had optimum carbon (C) and nitrogen (N) ratios (less than 30:1) for N mineralization through the microbes released the greatest $NH_4^+$ concentrations in the pot media at 90 days after the treatments, but GC mulch with the optimum C:N ratio did not. CF-, PL- and GR-treated plants had the largest leaf area, thickest stem diameter, longest shoot extension, and greater dry matter production. CONCLUSION(s): CF and PL showed an suitable organic nutrient source for improving plant growth in an orchard. Interestingly, GR also could be a nutrient source for tree growth, if vegetation competition is controlled by maintaining vegetation height and recycling enough grass clippings to the soil in an orchard.

• Journal of the Korean earth science society
• /
• v.31 no.2
• /
• pp.119-128
• /
• 2010

To make reliable interpretations on the sparse spatial data, the spatial distribution characteristics that are inevitable for spatial estimation should be properly analyzed. Variograms have been widely used for obtaining the spatial characteristics inherent to data in spatial estimation problems. But their applications were limited as the basic information for further data estimation. Therefore, the additional analysis of the meaning of variograms is required for more reliable data processing and interpretations. In this paper, we investigated the proper meaning of variogram values and the specific features of distributions which can be obtained through variogram analysis. Variograms can provide the information on both linearity and the strength changes of interrelationships between the data sets according to the direction and lag distance. First, sill and range values, which are main parameters of variograms, were analyzed. Then a similarity range using spatial auto-correlation values was introduced to verify the applicability of linearity analysis through the comparative study of spatial distribution features of gravity and magnetic data collected in Hwasan caldera. Through these analyses, we were able to identify the dissimilar patterns of gravity and magnetic data that became apparent according to the distribution and variation ranges of the data sets. It is inferred that the gravity and magnetic anomalous bodies are extended to the ground because linearity direction of gravity and magnetic data appear similarly with linearity derection of topography in Hwasan caldera.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.11
• /
• pp.753-764
• /
• 2020

In this study, the plastic zone and internal earth pressure of the tunnel were calculated using the following three methods: metal plasticity to analyze the deformation of metal during plastic processing, Terzaghi's earth pressure theory from the geotechnical perspective and modified Terzaghi's earth pressure theory, and slip line theory using Mohr-Coulomb yield conditions. All three methods are two-dimensional mathematical analysis models for analyzing the plane strain conditions of isotropic materials. Using the theory of metallurgical plastics, the plastic zone and the internal earth pressure of the ground were obtained by assuming that the internal pressure acts on the tunnel, so different results were derived that did not match the actual tunnel site, where only gravity was applied. An analysis of the plasticity zone and earth pressure via the slip-line method showed that a failure line is formed in a log-spiral, which was found to be similar to the real failure line by comparing the results of previous studies. The earth pressure was calculated using a theoretical method. Terzaghi's earth pressure was calculated to be larger than the earth pressure considering the dilatancy effect.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.17 no.6
• /
• pp.485-491
• /
• 1984

In succession to the previous paper, the effect of the addition of food additives, such as glucose, glycine, sucrose and sorbic acid on the histamine formation and histidine decarboxylase activity in mackerel muscle during storage at $25^{\circ}C$ was studied. Additionally, the effect of different rasping condition of mackerel muscle on the histamine formation was also studied. It was estimated that the rasping condition of mackerel muscle also affected to the histamine formation, by showing that much histamine was detected in homogenized muscle than in ground muscle when glucose and sucrose were added. The addition of glycine was inhibitory upon the histamine formation and histidine decarboxylase activity, which, in the muscle added $10\%$ of glycine, the histamine content was below the critical concentration of poisoning for histamine during storage for 5 days at $25^{\circ}C$. The addition of sorbic acid was also inhibited the histamine formation and histidine decarboxylase activity, and the inhibitory effect of $0.2\%$ addition was greater than $0.1\%$ addition.

• The Journal of the Korea Contents Association
• /
• v.14 no.12
• /
• pp.1010-1020
• /
• 2014

This study intended to compare and analyze the difference between resilience and academic stress of juveniles depending on having experience in participating in the camp, and furthermore, to analyze how the camping participation degree of juveniles affect resilience and academic stress. To do so, this study selected teenagers as a population among camping ground users located in Chungcheong and Kyunggi region in 2014, sampled out total 300 participants of 150 camping participants and 150 non-participants using purposive sampling method, then selected final 295 subjects for the final analysis. Validity and credibility of questionnaire were verified through factor analysis and reliability analysis. For data processing, the t-test and multiple regression analysis were used using SPSSWIN 18.00 program. Conclusions are as follows. First, the camp participant group of juveniles showed higher resilience than the non-participant group. Secondly, it was identified that among camping participation degree of juveniles, the resilience of positivity decreased when the length of stay was longer. Thirdly, the camp participant group of juveniles showed lower academic stress than the non-participant group, but did not who significant difference statistically. Fourthly, the school record stress and assignment stress decreased when the participation degree, the length of stay, among camping participation degree of juveniles was longer. Fifthly, it was identified that the better the resilience strengthened by participating in the camp, the academic stress decreased.

• Journal of the Korean Professional Engineers Association
• /
• v.32 no.4
• /
• pp.104-118
• /
• 1999

Alaska Pollack (Theragramma), Mackerel (Socomber japonicus), yellow corvenia (Pseudosc iance manchurica) were dressed, and then meat was separated from the other parts through a fish meat separator. After dehydration, the meat was ground with a silent cutter, packaged in polyethylene bags, and stored at -15。C for days. Samples were taken at regular intervals throughout the storage period and investigated for changes in puality characteristics such as the amounts of nitrogenous compounds, degree of lipid oxidation, fatty acid composition, and organoleptic factors. The resrlts obtained in this study were as follows; 1. The volatile basic nitrogen[VBN] contents of Alaska pollack, and yellow corvenia meat pastes increased from 14.4, 11.2 and 10.8mg% to 41.6, 38.3 and 40.6mg%, respectively during a 120 day storage period, whereas the trimethylamine oxide nitrogen [TMAO-N] contents decreased from 117.2, 12.8 and 17.2mg% to 40.3, 2.6 and 7.1mg% during the same period. 2. The TBA value of the mackerel meat paste showed a maximum peak after 60 days, and then decreased gradually, whereas the TBAvalues of the alaska pollack and yellow corvenia meat pastes increased steadily during the same period. The acid values of the meat pastes increased during the storage period, while the iodine values decreased. 3. The fatty acid composition of the total lipid of the meat pastes changed considerably during ghe 120 days storage period : saturated fatty acids in the total lipid such as myristic, palmitic, and stearic acid increased, while unsaturated fatty acids such as linoleic, gadoleic, eicosapentaenoic, erucic and docosahexaenoic acid decreased steadily. The initial percentage contents of the unsaturated fatty acids in the total lipid of the Alaska pollack, mackerel, and yellow corvenia meat pastes were 87.2%, 63.9%, and 75.9% respectively. However, the contents decreased to 46.0%, 42.5% and 51.3% after the 120day storage period. 4. The color of the meat pastes changde gradually into dark brown. L values of the meat paste measured with a thistimulus colorimeter decreased steadily during the storage period, while a and b values increased during same period. 5. Judging from the results of organoleptic evaluation on the fish odor, color and overall acceptability, significant difference were found between the odor and color of the mackerel and those of the yellow corvenia meat pastes. Overall acceptability score of yellow corvenia was higher than that of Alaska pollack or mackerel meat pastes.

• KIPS Transactions on Software and Data Engineering
• /
• v.6 no.9
• /
• pp.429-436
• /
• 2017

Unmanned Aerial Vehicles (UAV) that are piloted without human pilots can be commanded remotely via frequencies or perform pre-inputted missions. UAVs have been mainly used for military purposes, but due to the development of ICT technology, they are now widely used in the private sector. Teal Group's 2014 World UAV Forecast predicts that the UAV market will grow by 10% annually over the next decade, reaching $ 12.5 billion by 2023. However, because UAVs are primarily remotely controlled, if a malicious user accesses a remotely controlled UAV, it could seriously infringe privacy and cause financial loss or even loss of life. To solve this problem, a secure channel must be established through mutual authentication between the UAV and the control center. However, existing security techniques require a lot of computing resources and power, and because communication distances, infrastructure, and data flow are different from UAV networks, it is unsuitable for application in UAV environments. To resolve this problem, the study presents a lightweight UAV authentication method based on Physical Unclonable Functions (PUFs) that requires less computing resources in the ground Control and Non-Payload Communication (CNPC) environment, where recently, technology standardization is actively under progress.

• KIPS Transactions on Software and Data Engineering
• /
• v.8 no.12
• /
• pp.507-516
• /
• 2019

Costs invested in road maintenance and road development are on the rise. However, due to accidents such as portholes and ground subsidence, the risks to the drivers' safety and the material damage caused by accidents are also increasing. Following this trend, we have developed a system that determines road damage, according to the magnitude of vibration generated without directly intervening the driver when driving. In this paper, we implemented the system using a remote control car (RC car) simulator due to the limitation of the environment in which the actual vehicle is not available in the process of developing the system. In addition, we attached a vibration sensor and GPS sensor to the body of the RC car simulator to measure the vibration value and location information generated by the movement of the vehicle in real-time while driving, and transmitting the corresponding data to the server. In this way, we implemented a system that allows external users to check the damage of roads and the maintenance of the repaired roads based on data more easily than the existing systems. By using this system, we can perform early prediction of road breakage and pattern prediction based on the data. Further, for the RC car simulator, commercialization will be possible by combining it with business in other fields that require flatness.