• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2006년도 하계학술대회
• /
• pp.158-161
• /
• 2006

In this paper, we deal with EMI Analysis on Microstrip with Defected Ground plane. Specially, we investigate reflection, transmission, crosstalk, radiated emission on Microstrip with Defected Ground plane structure. And investigates undesired effects on various defected ground plane such as ground with split, slot, short end and open end gap. To analyze reflection, transmission and crosstalk of microstrip with defected ground plane, we used concept of the microstrip to slot line transition model. Besides, investigate radiated emission using FDTD Commercial tools such as CST MW

• 한국산학기술학회논문지
• /
• 제15권1호
• /
• pp.436-440
• /
• 2014

본 논문에서는 PCB Plane 레이어가 SMPS에 미치는 영향을 확인하기 위하여 일반적인 단면 PCB와 Plane을 갖는 양면 PCB를 이용한 SMPS의 출력특성을 각각 분석하였다. 그 이후 동일한 레이아웃을 갖는 PCB의 반대 면에 Ground Plane을 설치한 양면PCB를 이용하여 SMPS 기판을 작성하여 단면 PCB SMPS에 적용해서 분석한 모든 부품을 이동 실장한 후 두 SMPS의 출력특성을 전압, 전류, 고주파잡음 측면에서 비교 분석하였다. 그 결과 단면PCB의 SMPS는 100MHz대역의 고주파 잡음이 150mV인 반면, Ground Plane을 설치한 SMPS에서는 50mV로 1/3 저감되는 현상을 확인하였다. 그리고 고주파 잡음 성분 또한 감소됨을 확인하였다.

• 한국전자파학회논문지
• /
• 제19권3호
• /
• pp.304-310
• /
• 2008

이동 통신용 안테나로 PEC(Perfect Electric Conductor) 접지면을 갖는 U-slotted 패치 안테나가 널리 이용되고 있으나, 이동 통신 능력을 확대하기 위하여 대역폭의 개선이 요구되어 왔다. 본 논문에서는 대역폭을 확대하기 위하여 EBG(Electromagnetic Band-Gap) 접지면을 갖는 U-slotted 패치 안테나를 제안하고, 그 복사 특성을 고찰하였다. 본 논문에서 제안한 EBG 접지면을 갖는 U-slotted 패치 안테나의 대역폭이 개선됨을 보이기 위하여 EBG와 PEC 접지면을 갖는 두 가지 형태의 U-slotted 패치 안테나를 설계 제작하고 복사 특성을 측정하였다. 측정결과, EBG 접지면을 갖는 U-slotted 패치 안테나가 PEC 접지면을 갖는 안테나보다 대역폭이 넓은 것으로 확인되었다.

• 한국전자파학회지:전자파기술
• /
• 제2권4호
• /
• pp.3-9
• /
• 1991

This paper presents the characteristics of antenna factors of half-wave resonance dipole antennas above a ground plane. The current distributions on a horizontal and vertical dipole antennas were analyzed by the Galerkin's method of moments, and these solutions are used for calculating the horizontal and vertical antenna factors above the ground plane. It is shown that accurate antenna factors of the horizontal and vertical dipole above the ground plane are required of the radiated emission test.

• ETRI Journal
• /
• 제40권2호
• /
• pp.180-187
• /
• 2018

In this paper, we introduce a ground radiation antenna that uses controlled endless metal rim modes. In the proposed technique, the metal rim mode is tuned and excited as a one-wavelength radiator by a small ground radiation antenna. The proposed antenna occupies a clearance of $1mm{\times}4mm$ in a $30mm{\times}20mm$ ground plane. A metal rim with dimensions of $34mm{\times}24mm$ surrounds the ground plane, and the metal rim is separated from the ground plane by a gap of 2 mm. In addition, a lumped capacitor is inserted between the metal rim and the ground plane to control the characteristic mode of the metal rim such that the resonance of the metal rim is tuned to be equal to the operating frequency. By performing simulations and measurements, we compare the performance of the proposed antenna with that of a reference antenna that does not have an inserted capacitor between the metal rim and the ground plane. The results show that a significant improvement of the radiation performance is obtained by employing the proposed technique.

• Journal of electromagnetic engineering and science
• /
• 제12권4호
• /
• pp.247-253
• /
• 2012

This study presents a new, simple method for improving the front-to-back (F/B) ratio of a microstrip patch antenna. The back radiation of the microstrip patch antenna is reduced by removing some metallic parts around the ground plane and placing a new soft-surface configuration, consisting of an array of stand-up split-ring resonators on a bare dielectric substrate near the two ground plane edges. Compared to the F/B ratio of a conventional microstrip patch antenna with a full ground plane of the same size, our proposed microstrip patch antenna experimentally achieves an improved F/B ratio of 9.6 dB.

• Journal of electromagnetic engineering and science
• /
• 제15권2호
• /
• pp.120-122
• /
• 2015

This study presents a new, simple method for improving the front-to-back (F/B) ratio of a microstrip patch antenna (MSA) based on surface wave suppression. The back radiation of the MSA is significantly reduced by using the meandered ground plane edges and placing split-ring resonators (SRRs) in the middle of the meandered slots. By loading SRRs near the center of the meandered ground plane edges, some parts of the diffracted back-lobe power density can be reduced further. Compared to the F/B ratio of a conventional MSA with a full ground plane of the same size, an improved F/B ratio of 18 dB has been achieved experimentally for our proposed MSA.

• 대한전자공학회논문지TC
• /
• 제48권5호
• /
• pp.54-63
• /
• 2011

본 논문은 수직 접지면을 갖는 평판형 모노폴 안테나의 임피던스 특성 개선에 관한 논문이다. 평판형 모노폴 안테나의 임피던스 특성 개선을 위해 기존 연구된 방사체 구조 변형 외에 수직 접지면의 영향을 이용하였다. 수직 접지면의 영향을 분석하기 위해 기존 연구인 보조 공진기 모드 이외에 다이폴 안테나 모드를 제안하였다. 수직 접지면의 각 동작 모드를 기반으로, 모노폴 안테나와 수직 접지면 사이의 임피던스 특성 상관관계를 이용하여 평판형 모노폴 안테나의 임피던스 특성을 개선하였다. 개선 방법은 안테나의 급전 위치 변경 및 수직 접지면의 면적 변화이다. 본 분석 결과는 수직 접지면을 갖는 다양한 평판형 모노폴 안테나의 임피던스 특성을 개선 및 분석할 수 있을 것으로 기대 된다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 하계종합학술대회 논문집
• /
• pp.389-392
• /
• 1999

It is essential to estimate an effective inductance in a ground plane of muliti-layer IC package system in order to determine the simultaneous switching noise of the package. A new method to estimate the effective ground inductance in multi-layer IC package is presented. With the estimated ground plane inductance values, maximum switching noise variations according to the number of simultaneously switching drivers are investigated by developing a new SSN model. These results are verified by performing HSPICE simulation with the 0.35${\mu}{\textrm}{m}$ CMOS technology.

• 제어로봇시스템학회논문지
• /
• 제14권8호
• /
• pp.848-855
• /
• 2008

In this paper, we describe correspondence among multiple images taken by multiple cameras. The correspondence among multiple views is an interesting problem which often appears in the application like visual surveillance or gesture recognition system. We use the principal axis and the ground plane homography to estimate foot of human. The principal axis belongs to the subtracted silhouette-based region of human using subtraction of the predetermined multiple background models with current image which includes moving person. For the calculation of the ground plane homography, we use landmarks on the ground plane in 3D space. Thus the ground plane homography means the relation of two common points in different views. In the normal human being, the foot of human has an exactly same position in the 3D space and we represent it to the intersection in this paper. The intersection occurs when the principal axis in an image crosses to the transformed ground plane from other image. However the positions of the intersection are different depend on camera views. Therefore we construct the correspondence that means the relationship between the intersection in current image and the transformed intersection from other image by homography. Those correspondences should confirm within a short distance measuring in the top viewed plane. Thus, we track a person by these corresponding points on the ground plane. Experimental result shows the accuracy of the proposed algorithm has almost 90% of detecting person for tracking based on correspondence of intersections.