• 제목/요약/키워드: Ground Injection

검색결과 288건 처리시간 0.027초

압력식 쏘일네일링의 인발저항력 증가: 이론적 검증 (Pullout Resistance Increase in Soil-Nailing with Pressurized Grouting: Verification of Theoretical Solution)

  • 서형준;박성원;정경한;최항석;이인모
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2009년도 춘계 학술발표회
    • /
    • pp.419-433
    • /
    • 2009
  • Pressure grouting is a common technique in geotechnical engineering to increase the stiffness and strength of the ground mass and to fill boreholes or void space in a tunnel lining and so on. Recently, the pressure grouting has been applied to a soil-nailing system which is widely used to improve slope stability. The soil-nailing design has been empirically performed in most geotechnical applications because the interaction between pressurized grouting paste and the adjacent ground mass is complicated and difficult to analyze. The purpose of this study is to analyze the increase of pullout resistance induced by pressurized grouting with the aid of performing laboratory model tests and field tests. In this paper, two main causes of pullout resistance increases induced by pressurized grouting were verified: the increase of residual stress; and the increase of coefficient of pullout friction. From the laboratory tests, it was found that residual stress in borehole increases by pressurized grouting and dilatancy angle could be estimated by cavity expansion theory using the measured wall displacements. From the field test results, the pullout resistance of soil-nailing with pressurized grouting was found to be 10% larger than that of soil-nailing with gravitational grouting, mainly caused by mean normal stress increase and dilatancy effect. So, the pullout resistance could be estimated by considering these two effects. The radial displacement increases with dilatancy angle increase and the dilatancy angle decreases with injection pressure increase. The measured pullout resistance obtained from field tests is in good agreement with the estimated one from the cavity expansion theory.

  • PDF

제주도 지하수관정의 오염저감방안 (Improvement Method for Preventing Groundwater Pollution in Jeju Island)

  • 양성기;한상철
    • 한국환경과학회지
    • /
    • 제16권6호
    • /
    • pp.735-743
    • /
    • 2007
  • A grouting method is the way to effectively prevent pollutants from spreading into the ground during the digging process of groundwater. This study, based on the comparative study of grouting methods being generally accepted, suggests various construction methods which are suitable for geological structure as follows: In Jeju Island, it is very likely that rocks may fall in shuttered zones such as cracks, joints, scoria layers, and clinker layers. For this reason, it is recommended that materials be injected from the bottom toward the top, not from the top to the bottom. In the case where the amount of injected materials become too large in the areas of cracks or joints because of high level of permeability coefficient, grouting materials which smeared into surrounding areas may cause unwanted cut in the aquifer of the bottom level. To avoid this, the amount of water should be reduced from the typical water-cement ratio of 1:2, and grouting materials with larger grading should be used. If the deep excavation of ground is made in Jeju Island, it is likely to have lots of voids because of geological characteristics. Based on the results of this research, it is found that to construct interior casing, the centralizer should be attached to the casing to prevent the casing from being in contact with the counter fort. The grouting in Jeju Island should be thicker than usual. To avoid over-use of grouting materials, to prevent grouting in more than necessary zone, and to facilitate grouting of void areas, the flexible selection of materials is required. And, to exactly figure out the interior of dug well, an examination through CCTV should necessarily be performed when grouting work is in progress.

CPR 공법의 압축재하시험을 통한 기초지반의 보강효과 (Effect of CPR Foundation Reinforcement Assessed by Compressive Loading Tests)

  • 강성승;김정한;노정두;고진석
    • 지질공학
    • /
    • 제29권3호
    • /
    • pp.211-222
    • /
    • 2019
  • 본 연구는 CPR 공법을 적용한 압축재하시험을 통하여 지반의 항복하중과 허용지지력을 평가하여 기초 지반 보강효과를 확인하기 위한 것이다. 주입재의 평균압축강도는 계획된 강도보다 높게 나타났다. 또한 각 지층에서 표준관입시험 결과는 시험 전보다 시험 후의 평균 N값이 향상되었다. 즉, 이것은 지반의 지지력을 증대시키는 효과를 가져왔음을 의미한다. 두 종류의 CPR 말뚝 압축재하시험 결과에 의하면, 최대 재하하중에 의한 전침하량과 순침하량은 CPR 말뚝직경 허용범위를 초과하는 침하량을 나타냈다. 침하량 기준과 하중-침하량 곡선에 의해 산정한 항복하중 및 허용지지력은 적용되는 방법에 따라 값의 편차가 크게 나타났다. 따라서 허용지지력은 다양한 항복하중 산정법을 적용한 후 종합적인 분석을 통하여 최적의 값을 결정할 필요성이 있다고 사료된다.

Efforts against Cybersecurity Attack of Space Systems

  • Jin-Keun Hong
    • Journal of Positioning, Navigation, and Timing
    • /
    • 제12권4호
    • /
    • pp.437-445
    • /
    • 2023
  • A space system refers to a network of sensors, ground systems, and space-craft operating in space. The security of space systems relies on information systems and networks that support the design, launch, and operation of space missions. Characteristics of space operations, including command and control (C2) between space-craft (including satellites) and ground communication, also depend on wireless frequency and communication channels. Attackers can potentially engage in malicious activities such as destruction, disruption, and degradation of systems, networks, communication channels, and space operations. These malicious cyber activities include sensor spoofing, system damage, denial of service attacks, jamming of unauthorized commands, and injection of malicious code. Such activities ultimately lead to a decrease in the lifespan and functionality of space systems, and may result in damage to space-craft and, lead to loss of control. The Cybersecurity Adversarial Tactics, Techniques, and Common Knowledge (ATT&CK) matrix, proposed by Massachusetts Institute of Technology Research and Engineering (MITRE), consists of the following stages: Reconnaissance, Resource Development, Initial Access, Execution, Persistence, Privilege Escalation, Defense Evasion, Credential Access, Discovery, Lateral Movement, Collection, Command & Control, Exfiltration, and Impact. This paper identifies cybersecurity activities in space systems and satellite navigation systems through the National Institute of Standards and Technology (NIST)'s standard documents, former U.S. President Trump's executive orders, and presents risk management activities. This paper also explores cybersecurity's tactics attack techniques within the context of space systems (space-craft) by referencing the Sparta ATT&CK Matrix. In this paper, security threats in space systems analyzed, focusing on the cybersecurity attack tactics, techniques, and countermeasures of space-craft presented by Space Attack Research and Tactic Analysis (SPARTA). Through this study, cybersecurity attack tactics, techniques, and countermeasures existing in space-craft are identified, and an understanding of the direction of application in the design and implementation of safe small satellites is provided.

2차 고조파 주입을 사용한 고 선형성의 자체 발진 혼합기 (A Highly Linear Self Oscillating Mixer Using Second Harmonic Injection)

  • 김민회;조춘식;이재욱
    • 한국전자파학회논문지
    • /
    • 제23권6호
    • /
    • pp.682-690
    • /
    • 2012
  • 본 논문은 2차 고조파 주입을 적용한 고선형의 균형적인 자체 발진 혼합기(SOM)를 제안하였다. 제안한 SOM은 발진을 위하여 균형적 공진기 구조인 H-슬롯 결함 접지면 구조로 설계하였다. H-슬롯 결함 접지면 구조는 높은 Q 계수를 가지므로 발진기의 낮은 위상 잡음을 제공하기에 적합한 구조이다. 혼합기는 균형적 국부발진기(LO) 신호가 RF 입력 포트에 영향을 주면 안 되므로 LO-RF 신호의 격리에 좋은 단일 평형 혼합기를 활용하였다. 또한, 제안한 SOM은 선형성 향상을 위해 IF의 2차 고조파 주입을 위하여 서로 다른 피드백 경로를 사용하는 두 가지 방법을 제안하였다. 첫 번째 방법은 입력 파워 -20 dBm의 5 GHz RF 입력 신호일 때 226 MHz IF에서 3.08 dB의 변환 이득을 실현하였고, 두 번째 방법으로는 입력 파워 -20 dBm의 5.2 GHz RF 입력 신호일 때 423 MHz IF에서 2 dB의 변환 이득을 달성하였다. 두 가지 방법 대한 측정 결과, 3차 혼변조 왜곡(IMD3)는 각각 61.8 dB, 65 dB로 나타났다. 따라서 제안한 SOM은 2차 고조파 주입 기술을 적용하지 않은 것에 비해 두 가지 방법 각각 IMD3가 18.8 dB, 21 dB로 개선되었으므로 향상된 선형성을 보여준다.

유류로 오염된 철로지역의 지중정화를 위한 영향반경 산정과 공기주입법/토양증기추출법의 적용성 평가 (Calculation of Radius of Influence and Evaluation of Applicability of Air Sparging/Soil Vapor Extraction system for the Remediation of Petroleum Contaminated Rail Site)

  • 조장환;박정구;김용덕;서창일;김해금;최상일
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제20권1호
    • /
    • pp.1-6
    • /
    • 2015
  • The objectives of this study were to calculate the radius of influence (ROI) of well for an air-sparging (AS)/soil vapor extraction (SVE) system and to evaluate the applicability of the system applied for the remediation of the petroleum contaminated rail site. For air permeability test, three monitoring wells were installed at a location of 1.3 m, 2.3 m, 3.0 m from the extraction well. And the pressure of each monitoring well was measured by extracting air from the extraction well with the pressure and flow of $(-)2,600mmH_2O$ and $1.58m^3/min$. The ROI for an extraction well was calculated as 4.31 m. Air was injected into the injection well with the pressure and flow of $3,500mmH_2O$ and $0.6m^3/min$ to estimate the radius of influence for oxygen transfer. Oxygen concentrations of air from three monitoring wells were measured. The ROI of an injection well for oxygen transfer was calculated as 3.46 m. The 28 extraction wells and 19 injection wells were installed according to the ROI calculated. The AS/SVE system was operated eight hours a day for five months. The rail site was contaminated with the petroleum and concentrations of benzene, toluene, and xylene were over the 'Worrisome Standard' of the 'Soil Environment Conservation Act'. The contaminated area was estimated as $732m^2$ and contaminants were dispersed up to (-)3 m from the ground. During the operation period, soil samples were collected from 5 points and analyzed periodically. With the AS/SVE system operation, concentrations of benzene, toluene, and xylene were decreased from 7.5 mg/kg to 2.0 mg/kg, from 32.0 mg/kg to 23.0 mg/kg, from 35.5 mg/kg to 23.0 mg/kg, respectively. The combined AS/SVE system applied to the rail site contaminated with volatile organic compounds (VOCs) exhibited a high applicability. But the concentration of contaminants in soil were fluctuated due to the heterogeneous of soil condition. Also the effect of the remediation mechanisms was not clearly identified.

질벽의 실리콘 액 주사에 의한 폐색전종 및 급성 호흡곤란 증후군 1예 (A Case of Acute Respiratory Distress Syndrome with Pulmonary Embolism Induced by Injection of Silicone at Vaginal Wall)

  • 강문보;김성태;이정구;서찬종;이화은;정종배;김성권;김철;박정웅;정성환;남귀현
    • Tuberculosis and Respiratory Diseases
    • /
    • 제46권3호
    • /
    • pp.414-419
    • /
    • 1999
  • 실리콘 액은 미용 및 성형수술에 널리 사용되어지고 실리콘에 의한 불법적인 의료행위가 증가함에 따라 국소적 부작용 뿐만 아니라 폐 색전증에 의한 급성 호흡곤란 증후군등의 치명적인 폐침범의 부작용을 일으킨다는 보고가 있으나 국내보고는 아직 없었다. 본 증례에서는 건강한 39세 젊은 여자 환자가 질벽에 실리콘액을 주사한 후에 발생한 폐 색전증을 동반한 급성 호흡곤란 증후군 1예을 경험하였기에 문헌고찰과 함께 보고하는 바이다.

  • PDF

친환경적인 무기질계 주입재(NDS)의 내구성에 관한 연구 (The Durability of Environmentally Friendly Inorganic Grouting Material(NDS))

  • 이혜진;이종휘;정경식;천병식
    • 한국지반환경공학회 논문집
    • /
    • 제12권7호
    • /
    • pp.49-56
    • /
    • 2011
  • 현재 지반주입공법에 사용되는 약액으로는 물유리계가 주로 사용되고 있다. 그러나 물유리계를 사용한 약액주입공법은 현장적용에 있어서 내구성 저하, 강도 저하, 용탈 현상 등의 여러 가지 문제점을 가지는 바, 한시적인 차수용도로 사용될 수는 있으나 영구적인 지반보강 및 차수를 위해서는 본질적인 문제점을 가지고 있다. 본연구에서는 이러한 물유리계 지반주입재의 문제점을 해결할 수 있는 무기질계 지반주입재(NDS)의 환경영향평가 및 내구성을 규명하기 위하여 대표적인 물유리계 재료인 SGR 재료와 함께 일축압축강도시험, 어독성시험, 내구성시험, 침적 후 삼축투수시험을 실시하였다. 내구성시험 결과, 재령 28일 강도는 NDS가 SGR보다 1.5배 크게 나타났으며, 어독성시험 결과 SGR의 생존율은 50~70%, NDS는 100%로 나타났고 이는 NDS의 생존율이 SGR보다 더 높다는 것을 보여주었다. 따라서 시험결과를 종합해 볼 때 전반적으로 NDS가 SGR에 비해 내구성면에서 우수하며 친환경적임을 확인할 수 있었다.

지하 콘크리트 구조물 누수부위에 시공되는 5계열 보수재료의 유실 저항 성능 평가 연구 (A Study on the Performance Evaluation of Water(wash out) Resistance of 5-Type Repair Materials in Water Leakage of Underground Concrete Structures)

  • 김수연;유재용;오상근
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제24권5호
    • /
    • pp.61-68
    • /
    • 2020
  • 본 연구에서는 지하 콘크리트 구조물의 누수 균열에 사용되는 주입형 누수보수재료의 품질관리 방안으로 규격화된 국제표준 ISO TS 16774 「Part 3 Test method for water(wash out) resistance」와 KS F 4935 「점착유연형 고무 아스팔트계 누수보수용 주입형 실링재」를 이용하여 현재 우리나라 누수보수현장에서 사용하고 있는 주입형 누수보수재료 5계열(합성고무계, 시멘트계, 아크릴계, 에폭시계, 우레탄계) 3종류씩, 총 15종류의 보수재료에 대한 지하 콘크리트 구조물이 처한 지하수의 유동성에 관한 유실 대응력의 안정성을 연구·검토하였다. 그 결과, KS F 4935 규격에서 규정하고 있는 "질량 변화율이 -0.1% 이내"의 성능 기준으로 고찰하면 합성고무계 RG-2, 우레탄계의 UG-1을 제외하고 나머지 13Type 보수재료는 다소 지하수의 유동성에 따른 유실 저항력의 안정화 방안 검토가 필요 할 것으로 판단된다. 본 연구 결과는 콘크리트 구조물의 균열 부위에 사용되는 보수재료의 선정에 있어 기본 지표로 사용가능 할 것으로 판단된다. 또한, 추후에 연구 개발 되는 보수재료의 품질 향상에 반영할 수 있는 기준 자료의 활용을 기대할 수 있다.

지반내 입자거동 및 흐름을 고려한 수압작용 모델링 (Fluid Injection Simulation Considering Distinct Element Behavior and Fluid Flow into the Ground)

  • 전제성;김기영
    • 한국지반공학회논문집
    • /
    • 제24권2호
    • /
    • pp.67-75
    • /
    • 2008
  • 개별요소방법은 재료의 미시적 거동 및 불연속적 거동과 관련하여 지반공학 분야에서 그 활용이 증가하고 있으나, 기존 개별요소 방법들은 입자형태의 재료들간 상호작용을 위주로 연구되었으며, 이는 지반공학 분야에 개별요소 방법을 제한적으로 적용하는 주요 원인이 되었다. 최근 기존 개별요소 방법에 흙, 암반 및 투수성 매질에서의 물 흐름을 고려한 수리연동 기법의 적용연구(Kawaguchi et al., 2003; Shimizu, 2004)가 진행되고 있다. 본 연구에서는 기존 개별요소방법에 수리연동 기법을 적용하여 수압조건별 지반의 공동생성 및 확장에 대한 수치해석을 실시하였다. 직사각형 해석요소에 입자크기와 초기 간극률 조건에 대한 개별요소 및 경계면 생성 후, 서보 제어방법을 통한 경계면 응력조건을 구현하였다. 수리거동의 고려는 연속방정식과 Navier-Stokes 방정식을 이용하여 압력과 속도를 구한 후, 입자와 유수간의 상호작용을 풀어가는 방식(Tsuji, 1993)으로 수행하였다. 구속압 조건($0.1MP{\alpha},\;0.5MP{\alpha}$)에 대하여 해석모델 중앙지점에 7단계로 증가되는 수평방향 유속을 재하하고, 재하지점 인근의 개별요소 이동 및 지점별 유량, 유속, 압력, 경계면 응력변화 등을 분석하였으며, 해석조건에 따라 개별요소와 수리 영향의 상호거동을 통한 공동생성 및 확장, 한계압력 발생 등을 확인하였다.