• PNF and Movement
• /
• 제19권2호
• /
• pp.279-285
• /
• 2021

Purpose: This study aimed to develop new digital navicular drop test (ND-NDT) equipment and to determine its validity and reliability. Methods: A total of 24 healthy male and female adults, who fully understood the purpose of the study and gave consent to participate in the study, were selected as participants. The NDT and ND-NDT were conducted in the dominant foot of the participants in a random order. For the NDT, the position of the navicular bone was marked with a pen first; then, the height of the navicular bone from the ground was measured in both sitting and standing positions. For the ND-NDT, after the sticker-type reflection markers were attached to the position of the navicular bone, the height of the navicular bone from the ground was measured in both sitting and standing positions. To assess the validity of the diagnostic tests, the same examiner measured the height of the medial longitudinal arch (MLA) three times in both the sitting and standing positions. To assess the inter-rater reliability of the ND-NDT, three examiners, in a random order, attached the sticker-type reflection markers to the position of the navicular bone and then measured the height of the MLA in both positions. Results: In the sitting position, the Pearson correlation coefficient (r) between the two diagnostic tests was very high (r = 0.97) and statistically significant. In the standing position, the Pearson correlation coefficient (r) between the two tests was 0.95, which was also statistically significant. The ICC_2,1 values in the sitting and standing positions were 0.93 and 0.95, respectively, indicating significantly high inter-rater reliability. Conclusion: The ND-NDT equipment showed very high diagnostic validity, as well as excellent inter-rater reliability, indicating the clinical usefulness of the equipment as a diagnostic system for confirming pes planus.

• 한국항공우주학회지
• /
• 제45권8호
• /
• pp.639-646
• /
• 2017

본 논문에서는 군용 항공기를 위한 새로운 하중 모니터링 시스템에 대하여 소개하였다. 이 시스템은 항공기에 장착되는 센서와 탑재장비 및 지상에서 운용되는 지상분석장비로 구성된다. 이 시스템을 이용하여 항공기에 작용하는 구조정적하중을 비행파라미터로 추정할 수 있을 뿐 아니라, 정적하중, 동적하중 및 예상치 못한 이벤트에 의한 구조물의 응답을 센서로 측정할 수 있다. 특히 다점 측정이 가능한 광섬유 센서를 사용하였다. 탑재장비는 관련 군사규격서의 요구도를 만족하도록 설계되었으며, 일련의 환경시험으로 입증하였다. 본 시스템은 비행시험에 앞서 지상구조시험에 사용되고 평가되었으며, 향후 비행시험평가를 통하여 군용 항공기의 구조하중 모니터링 시스템으로 사용될 예정이다.

• 한국지반환경공학회 논문집
• /
• 제20권5호
• /
• pp.39-46
• /
• 2019

준설점토를 활용한 연약지반은 장비주행성 및 진입로의 확보를 위해 시멘트 계 고화재 및 무기질 고화재 등을 활용한 표층고화처리공법이 사용되고 있으나 환경에 유해한 물질의 용출로 인한 문제가 제기되고 있어 환경과 기능성을 모두 만족하는 표층고화처리 공법의 개발이 필요하다. 표층처리 공법으로는 조기강도와 장기적인 안정 등을 고려하여 시멘트계 고화재를 이용한 표층고화처리공법이 많이 활용되고 있으며, 지반개량 효과가 크고 경제적 효율성으로 인해 국 내외에서는 시멘트계 고화재를 이용한 표층개량에 대한 연구과 수행되어 지고 있다. 그러나 최근 환경과 기능성의 문제가 제기되어 시멘트에서 발생되는 6가크롬(Cr6+), 수은(Hg) 등의 유해물질로 인해 지반오염과 환경문제가 발생되어 다양한 친환경적인 공법의 개발이 요구되고 있는 실정이다. 따라서 이 연구에서는 자연함수비의 준설점토를 시멘트와 친토양고화재를 혼합한 혼합토를 대상으로 동일한 배합조건 및 양생조건에 따른 일축압축강도를 분석하고 이 결과를 기준으로 표층개량범위 적용 및 실내모형토조시험을 수행하여 초연약지반의 강도특성 및 지지력 특성을 검토하고자 한다.

• 조명전기설비학회논문지
• /
• 제28권3호
• /
• pp.91-96
• /
• 2014

Modern electronic circuits are becoming more vulnerable to damage by surges, and it is required to improve the impulse withstand voltage performance of electrical and electronic equipment. This paper presents the impulse withstand voltage performance of lighting equipment connected to power lines, and the impulse withstand voltage tests for fluorescent lamp, LED lamp and halogen lamp were carried out according to the reference standards under normal service conditions. To conduct performance tests against lightning surge, a combination wave ($1.2/50{\mu}s$ voltage - $8/20{\mu}s$ current) was employed. The test surge was applied between lines or between line and ground of the specimen to be measured. The test surge was applied synchronized at the peak value of the positive and negative AC voltage waves. As a consequence, some specimens satisfied the impulse withstand voltage test criteria, but lighting equipment such as 36W fluorescent lamps, 5W and 5.5W LED lamps and 50W halogen lamp were damaged at the test voltage levels between power lines. It is needed to improve the qualities of lighting equipment to satisfy EMC immunity requirements of equipment for general lighting purposes.

• 항공우주시스템공학회지
• /
• 제17권1호
• /
• pp.88-96
• /
• 2023

우리나라에서 개발 중인 저궤도 위성은 아리랑 위성으로, 이제까지 꾸준한 성능향상이 있었다. 이때 탑재체의 성능향상에 따른 탑재체의 전력요구도는 늘어나게 되었고 이에 위성 내부 전력 공급장치의 설계 및 Solar Array의 구성 등 위성 설계가 달라진다. 이에 따라 위성에 전력을 공급하며 위성 통합시험을 진행하는 전력계 전기지상지원장비 설계 시 전력 증가에 따라 많은 고려사항이 필요로 한다. 본 논문은 탑재체에 따른 위성 전력요구도의 변화 및 전력요구도 증가에 따른 전력계 전기지상지원장비 설계 시 고려할 사항에 대해서 다룬다.

• 한국항공운항학회지
• /
• 제25권3호
• /
• pp.68-73
• /
• 2017

In this study, we design a low-cost test equipment for real-time image observation and transmission/reception distance test using 1m by 1.5m bang-pai kite. The image observation is made by using two servo motors to enable the camera to control the two axis attitude. The image observation equipment is hung on the string of a kite and the test is performed to observe the real time image. The transmission and reception distance test of the wireless RF transceiver module is conducted on the ground and in the air.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제54권10호
• /
• pp.581-586
• /
• 2005

The multi-beam side scan sonar system uses the towfish installed sonars, it is an equipment that search images of the bottom surface of the sea in real time. It is a typical equipment that is related to a sea investigation such as a geological survey, seabed communication cable and power line cable placing repair investigation, fish breeding ground investigation, sea purification, relic and mineral investigation, and mine and submarine search. Recently, it is used to sea purification and geological survey that require information of the correct surface of the seabed. Therefore, this research develops multi-beam sensors for a side scan sonar that supply various information with the fast scan speed and correct high resolution that is not a simple underwater investigation equipment.

• Structural Engineering and Mechanics
• /
• 제45권6호
• /
• pp.821-835
• /
• 2013

The acceleration that the electrical equipment experiences on a structure can be several times the ground acceleration. Currently, substation support structures are being designed according to ASCE (Substation Structure Design Guide 2008), without any consideration about effects of these structures on dynamic behavior of mounted equipment. In this paper, a parametric study is implemented in order to improve seismic design of candlestick substation structures based on this design guide. To do this, dynamic amplification factor (DAF) of different candlestick support-equipment combinations is evaluated and compared to the target DAF presented in IEEE STD 693 (2006). Based on this procedure, a new criterion is developed to restrict maximum acceleration at support-equipment intersection.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2003년도 추계 학술발표회논문집
• /
• pp.411-418
• /
• 2003

This paper presents the results of experimental studies on the equipment isolation effect in the nuclear containment. for this Purpose, shaking table tests were performed. The natural rubber bearing (NRB) and high damping rubber bearing (HDRB) were selected for the isolation. Peak ground acceleration, damping characteristics of isolation system and frequency contents of selected earthquake motions were considered. finally, it is presented that the NRB and HDRB systems are effective for the small equipment isolation and the damping of isolation systems can be affected to the seismic isolation effect.

• 국제학술발표논문집
• /
• The 3th International Conference on Construction Engineering and Project Management
• /
• pp.774-780
• /
• 2009

Simulation is becoming increasingly popular in construction for training, planning and for assessment of projects. There are, however, significant problems inherent in simulating construction which are not common to other simulations. This paper describes the development and use of computer-based game for teaching and learning of some aspects of construction project management. It is concerned with the development of a model used to simulate the construction of a rock- and clay-fill dam. It includes detailed physical modelling of the performance of individual pieces of equipment and their interaction with the ground, the geography of the project and the weather in which the equipment operates. The behaviour of all of the individual pieces of equipment when acting as fleets is also discussed. The paper also describes the modelling issues of non-technical aspects of earthmoving operations. These include environmental impact, safety, quality and risks. The problems of integrating these with the physics-based models of the equipment performance are discussed. The paper also draws on real experience of using the game in classes in three universities in different countries.