• The Journal of Engineering Geology
• /
• v.29 no.1
• /
• pp.23-35
• /
• 2019

Landslides occur due to heavy rainfall in the summer season. Some of water may infiltrate into the ground; it causes a high saturation condition capable of causing a landslide. Soil properties are crucial in estimating slope stability and debris flow occurrence. The main study areas are Gwanaksan, Suraksan and Bukhansan (Mountain) in Seoul. A total of 44 soil samples were taken from the study area; and a series of geotechnical tests were performed. Physical and mechanical properties were obtained and compared based on region. As a result, among well-graded soils, they are classified as a clayey sand. Coarse-grained and fine-grained contents are approximately 95% and 5%, respectively, with very low amount of clay content. Density, liquid limit and dry unit weight are ranged in $2.62{\sim}2.67g/cm^3$, 27.93~38.15% and $1.092{\sim}1.814g/cm^3$. Cohesion and internal friction angle are 4 kPa and $35^{\circ}$ regardless of mountain area. Coefficient of permeability is varied between $3.07{\times}10^{-3}{\sim}4.61{\times}10^{-2}cm/sec$; it means that it results in great seepage. Permeability is inversely proportional to the uniformity coefficient and is proportional to the effective particle size. In the formal case, there was a difference by mountain area, while in the latter, the tendency was almost similar.

• Journal of the Society of Disaster Information
• /
• v.17 no.3
• /
• pp.655-666
• /
• 2021

Purpose: This study is to develop a method for measuring dynamic speeding risks using vehicle trajectory big data and to demonstrate the feasibility of the devised speeding index. Method: The speed behaviors of vehicles were analysed in microscopic space and time using individual vehicle trajectories, and then the boundary condition of speeding (i.e., boundary speed) was determined from the standpoint of crash risk. A novel index for measuring the risk exposure of speeding was developed in microscopic space and time with the boundary speed. Result: A validation study was conducted with vehicle-GPS trajectory big data and ground-truth vehicle crash data. As a result of the analysis, it turned out that the index of speeding-risk exposure has a strong explanatory power (R²=0.7) for motorway traffic accidents. This directly indicates that speeding behaviors should be analysed at a microscopic spatiotemporal dimension. Conclusion: The spatial and temporal evolution of vehicle velocity is very variable. It is, hence, expected that the method presented in this study could be efficaciously employed to analyse the causal factors of traffic accidents and the crash risk exposure in microscopic space using mobility trajectory data.

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.3
• /
• pp.47-54
• /
• 2011

The rockfall protection fence installed to secure safety against rockfall occurring in cut slope has been designed under the condition with 50kJ of impact energy arising when the 400kg of rock block is falling from 12.5m height. However, in falling case of bigger rock block or from higher place, it is hard to be secure of safety with existing rockfall protection fence. Using the rockfall program, safety analysis for rockfall is conducted in this paper by changing slope height, separating distance from fence, and slope angle, according to rock block sizes. In the result of analysis, when a 400kg of rock block which is designed load is fallen, the existing rockfall protection fence with 2.5m height can secure most of rock fall except some cases for the slope having 20m or less hight, whereas for more than 20m height, the fallen rock is frequently splattered over the rockfall protection fence, as well as the impact energy of rockfall may exceed designed impact energy. Therefore, in the design of rock fence, it is considered appropriate to design that after conducting safety review for rockfall according to the ground conditions, evaluating the bounce height and impact energy of rock fall, and then installing appropriate rockfall protection fence would be applicable rather than just following standards based design drawing.

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.1
• /
• pp.13-26
• /
• 2011

Because the allowable current loading of buried electrical transmission cables is frequently limited by the maximum permissible temperature of the cable or of the surrounding ground, there is a need for cable backfill materials to be maintained at a low thermal resistivity during the service period. Temperatures greater than $50^{\circ}C$ to $60^{\circ}C$ may lead to breakdown of cable insulation and thermal runaway if the surrounding backfill material is unable to dissipate the heat as rapidly as it is generated. This paper describes the results of studies aimed at the development of backfill material to reduce the thermal resistivity. A large number of different additive materials were tested to determine their applicability as a substitute material. The results of Dong-rim river sand (relatively uniform) show that as water content level increases, thermal resistivity tends to decrease, whereas the thermal resistivity on dry condition is very high value($260^{\circ}C-cm/watt$). In addition, other materials(such as Jinsan granite screenings, A-2(sand and gravel mixture), E-1(rubble and granite screenings mixture) and SGFC(sand, gravel, fly-ash and cement mixture)) are well-graded materials with low thermal resistivity($100^{\circ}C-cm/watt$ when dry). Based on this research, 4 types of improved materials were suggested as the environmentally friendly backfill materials with low thermal resistivity.

• Journal of agriculture & life science
• /
• v.53 no.4
• /
• pp.113-124
• /
• 2019

In this study, the operational characteristics of a cam-type vegetable transplanter which usually used in domestic was analyzed and operating mechanism of a transplanting device was analyzed. The main components and power path of the transplanter were analyzed. The maximum and minimum control cycles according to the moving speed and the plant spacing were analyzed. 3D modeling and simulation were performed to derive the trajectory of the bottom end of the transplanting hopper and the plant spacing at the each operating condition. The simulation results were verified by the field tests. As main findings of this study, the transplanting device has one degree of freedom (DOF) which consist of 13 links, 17 rotating joints and 1 half joint, and each part has composite structure with cam and links. By continuous and repetitive motion of the structures of transplanting device, the transplanting hopper plants the seedling in the ground with a vertical direction, and the seedling was planted stably. The power is transmitted to the driving part and transplanting device from the engine, and the maximum and minimum plant spacing of the transplanting device were about 900 mm and 350 mm, respectively.

• Journal of Korean Library and Information Science Society
• /
• v.52 no.4
• /
• pp.79-102
• /
• 2021

This research is based on open data from the National Library Statistics System and Seoul Survey 2020 from Seoul to analyze the Seoul citizens' usage of public libraries. For such purposes, this research compared and diagnosed the condition of public libraries services at 25 districts of Seoul, focusing on objective indicators of library management and general usage records to understand the correlations between the two. Objective indicators such as budgets, human labor, the number of books, and total ground area were compared with usage records of different classes of Seoul citizens, organized by the citizens' place of living, educational background, and monthly household income. As a result of the research, the correlation between the objective indicators and public usage records of different classes was confirmed. Seoul citizens' usage of public libraries and reading tendency were identified. In addition to, a balanced development of the public libraries in Seoul was proposed to overcome regional disparities and leveling the service level by investigating usage behavior and reading tendency of the public libraries in Seoul.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.23 no.4
• /
• pp.283-294
• /
• 2021

Solar radiation is an important meteorological factor in the agricultural sector. The ground exposed to sunlight is highly influenced by the surrounding terrains especially in South Korea where the topology is complex. The solar radiation on an inclined surface is estimated using a solar irradiance correction factor for the slope of the terrain along with the solar radiation on a horizontal surface. However, such an estimation method assumes that there is no barrier in surroundings, which blocks sunlight from the sky. This would result in errors in estimation of solar radiation because the effect of shading caused by the surrounding terrain has not been taken into account sufficiently. In this study, the shading effect was simulated to obtain the brightness value (BV), which was used as a correction factor. The shaded relief images, which were generated using a 30m-resolution digital elevation model (DEM), were used to derive the BVs. These images were also prepared using the position of the sun and the relief of the terrain as inputs. The gridded data where the variation of direct solar radiation was quantified as brightness were obtained. The value of cells in the gridded data ranged from 0 (the darkest value) to 255 (the brightest value). The BV analysis was performed using meteorological observation data at 22 stations installed in study area. The observed insolation was compared with the BV of each point under clear and cloudless condition. It was found that brightness values were significantly correlated with the solar radiation, which confirmed that shading due to terrain could explain the variation in direct solar radiation. Further studies are needed to accurately estimate detailed solar radiation using shaded relief images and brightness values.

• Korean Journal of Ecology and Environment
• /
• v.54 no.4
• /
• pp.334-345
• /
• 2021

The present study investigated the effect of global warming on germination and initial growth across six deciduous oak species (Quercus mongolica, Q. variabilis, Q. serrata, Q. dentata, Q. aliena, and Q. acutissima), which are the dominant tree species in Korea forest ecosystems. Seeds were sown in climate change treatments, with temperatures higher than those of the control (approximately 3.0℃ higher), and CO₂ concentrations higher than those of the control (approximately 2-fold higher). Initial growth in each species was measured every two weeks. Initial growth was more rapid in all oak species at the time of root and shoot emergence under high temperature and CO₂ treatments than in the control group. Leaf emergence in Q. mongolica, Q. variabilis, and Q. serrata occurred earlier under the climate change treatments than under the control. Root length increased significantly in Q. mongolica, Q. variabilis, and Q. dentata under the climate change treatments when compared to under the control. However, Q. aliena and Q. serrata exhibited a contrasting trends, and no significant difference was observed between the species and Q. acutissima. Shoot length increased significantly in Q. aliena under climate change treatments when compared to under the control but decreased in Q. aliena. In addition, no significant difference was observed in shoot length among Q. mongolica, Q. dentata, and Q. acutissima. The results showed that climate change treatments facilitated early growth, rapid emergence from the ground, leaf development, and enhanced belowground growth in Q. mongolica. Conversely, Q. aliena exhibited the lowest aboveground and belowground growth under climate change treatments when compared to other oak species. Climate change treatments had the least impact on Q. acutissima considering the insignificant differences observed in initial growth rates under climate change treatment.

• Journal of Conservation Science
• /
• v.37 no.3
• /
• pp.209-219
• /
• 2021

In this study, the wind environment in an urban area near Sungneymun gate was numerically investigated in the cases of inflow directions. The wind fields for the target area were simulated using Geographic Information System data and Computational Fluid Dynamics model. Results, including vector fields, three-dimensional wind velocity components, and wind speeds, were analyzed to examine flow characteristics. Wind direction variability affected by buildings was shown in the target area. The complex flows around Sungneymun did not depend on the inflow direction as a boundary condition. The wind speed around Sungneymun was generally 3 times stronger at 14 m above ground level (AGL) compared to the surface wind at 2 m AGL and relatively high in the case of easterly inflow. The effect of wind was also analyzed to be relatively significant at the southeast side of Sungneymun. Thus, it was suggested that the assessment of wind environment affected by high-rise and high-density buildings should be necessary for the architectural heritage in urban areas.

• Journal of the Korean Geotechnical Society
• /
• v.38 no.12
• /
• pp.7-17
• /
• 2022

The ratios of water and controlled low-strength materials (CLSM) were selected as 1:0.4, 1:0.6, 1:0.8, 1:1.0, and 1:1.2 to minimize the construction and long-term decrease in uniaxial compressive strength due to dry shrinkage through the combination of water, CLSM, and expansion agent. Approximately 2% and 5% of the expansion agent were added for each blending condition. As a result, it was found that the compressive strength decreased and the expandability increased as the specific gravity of the water increased. In addition, it was confirmed that the compressive strength increased rapidly up to 15 days of age compared to the CLSM used in the field. However, the compressive strength decreased compared to the 15 days of the age as of the 28 days of the age. It showed engineering characteristics similar to CLSM generally used in the field. Therefore, the water and the CLSM were mixed at a ratio of 1:0.8, and the field test was performed by adding 5% of an expansion agent. As a result, 28 days after age, the cavity waveform was observed using the handy GPR exploration system, and it was found that cavity waveform was relaxed or disappeared.