• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1064-1066
• /
• 2003

In this paper, ground penetrating radar (GPR), which has the capability to detect non metal and plastic mines, is proposed to detect and discriminate antipersonnel (AP) landmines. The time domain GPR - Impulse radar and frequency domain GPR - SFCW (Stepped Frequency Continuous Wave) radar is utilized for metal and non-metal landmine detection and its performance is investigated. Since signal processing is vital for target reorganization and clutter rejection, we implemented the MUSIC (Multiple Signal Classification) algorithm for the signal processing of SFCW radar data and SAR (Synthetic Aperture Radar) processing method for the signal processing of Impulse radar data.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1061-1063
• /
• 2003

This contribution reports on the potential of L-band Permanent Scatterer technique for the detection and monitoring of ground subsidence. We present the use of PS in the abandoned mining area, Korea. Discrete and temporarily stable natural reflectors or permanent scatterers (PS) can be identified from long temporal series of interferometric SAR images. This subset of image pixels can be exploited successfully for high accuracy differential measurements (Ferretti et al., 2000).

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.280-282
• /
• 2003

The downlink data rates of the space-born payloads such as high-resolution optical cameras, synthetic aperture radars (SAR) and hyper-spectral sensors are being rapidly increased. For example, the image transmission rates of KOMPSAT-2 MSC(Multi-Spectral Camera) is 320Mbps even if on-board image compression scheme is used.[1] In the near future, the data rates are expected to be a level 500${\sim}$600Mbps because the required resolution will be higher and the swath width will be increased. This paper describes many techniques they enable 500Mbps data receiving and archiving system.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.360-362
• /
• 2003

This paper presents simple feature-based approaches for full- and/or semi-automatic extraction, selection, and localization (center-determination) of ground control points (GCPs) for radargrammetry using airborne synthetic aperture radar (SAR) images. Test results using airborne NASA/JPL TOPSAR images in Taiwan verify that the registration accuracy is about 0.8${\sim}$1.4 pixels. In c.a. 30 minutes, 1500${\sim}$3000 GCPs are extracted and their point centers in a SAR image of about 512 ${\times}$ 512 pixels are determined on a personal computer.

• Korean Journal of Remote Sensing
• /
• v.16 no.2
• /
• pp.157-175
• /
• 2000

A synthetic aperture radar (SAR) system is able to provide all-weather, day-and- night superior imaging capability of the earth surface, and thus is extremely useful in surveillance for both civil and military applications. In this paper, the X-band high resolution spaceborne SAR system design is demonstrated with the key design performance for a given mission and system requirements characterized by the small satellite system. The SAR multi-mode imaging technique is presented with a critical parameter assessment, and the standard mode results are analyzed in terms of the image quality performances. In line with the system requirement X-band SAR payload and ground reception/processing subsystems are designed and the major design results are presented with the key performance characteristics. This small satellite SAR system shows the wide range of imaging capability with high resolution, and proves to be an effective surveillance systems in the light weight, high performance and cost-effective points of view.

• Korean Journal of Optics and Photonics
• /
• v.12 no.5
• /
• pp.382-388
• /
• 2001

KITSAT-3, launched at May 26 1999, has an earth observation optical payload named MEIS (Multi-spectral Earth Imaging System). The MEIS is a Managin mirror telescope of aperture size of 95mm, and it images the ground with the ground sampling distance of 13.8m over 48km at the altitude of 720km using three different observations bands. This paper first presents the design and then the optics, relating results of manufacturing, integration and test. Finally it briefly discusses the current status of MEIS operation.

• Current Optics and Photonics
• /
• v.7 no.4
• /
• pp.354-361
• /
• 2023

We present the optical design and experimental verification of resolving performance of a 3× long wavelength infrared (LWIR) zoom camera for drones. The effective focal length of the system varies from 24.5 mm at the wide angle position to 75.1 mm at the telephoto position. The design specifications of the system were derived from ground resolved distance (GRD) to recognize 3 m × 6 m target at a distance of 1 km, at the telephoto position. To satisfy the system requirement, the aperture (f-number) of the system is taken as F/1.6 and the final modulation transfer function (MTF) should be higher than 0.1 (10%). The measured MTF in the laboratory was 0.127 (12.7%), exceeds the system requirement. Outdoor targets were used to verify the comprehensive performance of the system. The system resolved 4-bar targets corresponding to the spatial resolution at the distance of 1 km, 1.4 km and 2 km.

• Geophysics and Geophysical Exploration
• /
• v.8 no.4
• /
• pp.270-279
• /
• 2005

Under the research project supported by Japanese Ministry of Education, Culture, Sports, Science and Technology (MEXT), we have conducted the development of GPR systems for landmine detection. Until 2005, we have finished development of two prototype GPR systems, namely ALIS (Advanced Landmine Imaging System) and SAR-GPR (Synthetic Aperture Radar-Ground Penetrating Radar). ALIS is a novel landmine detection sensor system combined with a metal detector and GPR. This is a hand-held equipment, which has a sensor position tracking system, and can visualize the sensor output in real time. In order to achieve the sensor tracking system, ALIS needs only one CCD camera attached on the sensor handle. The CCD image is superimposed with the GPR and metal detector signal, and the detection and identification of buried targets is quite easy and reliable. Field evaluation test of ALIS was conducted in December 2004 in Afghanistan, and we demonstrated that it can detect buried antipersonnel landmines, and can also discriminate metal fragments from landmines. SAR-GPR (Synthetic Aperture Radar-Ground Penetrating Radar) is a machine mounted sensor system composed of B GPR and a metal detector. The GPR employs an array antenna for advanced signal processing for better subsurface imaging. SAR-GPR combined with synthetic aperture radar algorithm, can suppress clutter and can image buried objects in strongly inhomogeneous material. SAR-GPR is a stepped frequency radar system, whose RF component is a newly developed compact vector network analyzers. The size of the system is 30cm x 30cm x 30 cm, composed from six Vivaldi antennas and three vector network analyzers. The weight of the system is 17 kg, and it can be mounted on a robotic arm on a small unmanned vehicle. The field test of this system was carried out in March 2005 in Japan.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.12
• /
• pp.1128-1139
• /
• 2013

KOMPSAT-5(KOrea Multi-Purpose SATellite-5) has a benefit of continuously conducting its mission in all weather and even night by loading SAR(Synthetic Aperture Radar) payload, which is different from optical sensor of KOMPSAT-2 satellite. During IOT(In-Orbit Test) periods, SAR image calibration should be conducted through ground target of which location and RCS is pre-determined. Differently from the conventional corner reflector, active transponder has a capability to change its internal transfer gain and delay, which allows active transponder to be shown in a pixel of SAR image with very high radiance and virtual location. In this paper, the development of active transponder is presented from design to I&T(Integration and Test).

• Journal of Astronomy and Space Sciences
• /
• v.26 no.4
• /
• pp.667-676
• /
• 2009

The payload can be classified as a passive and active type. Generally radar satellite to acquire specific information through various radar images will use the SAR (Synthetic Aperture Radar) as active type payload. the principal of SAR satellite is to receive the signal returned from certain objects and/or surfaces in order to construct an radar image. The data acquired from the satellite in its real orbit shall be needed to perform successful CAL/VAL (Calibration & Validation) because the SAR satellite have to receive the returned signal for SAR image construction. In order to do the above, the returned signal shall be related to ground targets. Especially ground target is the corner reflector (CR) for CAL/VAL. Generally the reflector has various types and shapes. Their selection can be dependent on characteristics and mission objectives of SAR satellite. In this paper, reflector focused on the optimal case and effective case has been studied and then the trihedral corner reflector under this study has been designed and its performance also analyzed.