• 대한인간공학회지
• /
• 제36권5호
• /
• pp.569-578
• /
• 2017

Objective: The purposes of this experiment are an analysis of accuracy between target force level and subjective rating for the Target Force Level and an analysis of the patterns of subjective rating depending on target force level when there is no feedback from males for analysis. Background: The study of perceived exertion about the static contraction is processed with using among the matching procedure method between contralateral limbs, Exertion vs. Borg CR-10 scale and Exertion vs. %MVC (Maximum Voluntary Contraction). However, when there is no feedback, there is lack of the study on whether the subject can distinguish the subjective rating of the force depending on the target force levels. Method: Total 30 males, healthy subjects are measured the maximum grip strength, MVC, and then, each subject is measured the subjective rating and the accuracy with the random target force level (10, 20, 30, 40, 50, 60, 70, 80, and 90% MVC). Results: In the MVC study, males exerted 256.87N (${\pm}51.33$). In the subjective rating of grip strength increased for each Target Force Level (9 levels), higher subjective rating evaluated (p<0.05). In accuracy examination between target force level and subjective rating of grip strength by each %MVC, 10, 30, 40, 50, 70, 90% target force levels showed accurate strength (p>0.05). However, at 20% target force level, the subjects evaluated less subjective rating of grip strength than the target force (Underestimation), and at 60% and 80% target force level, the subjects evaluated more subjective rating of grip strength than the target force (Overestimation) (p<0.05). Conclusion: In the experiment, the MVC showed 256.87N (${\pm}51.33$) for the male adults and as the subjective rating value increased for each Target Force Level (9 levels), higher subjective rating evaluated (p<0.05). Moreover, the results of the accuracy test between target forces and subjective rating of the subjects showed that most participants rated a fairly accurate assessment of subjective rating of grip strength for Target Force Level (9 levels), except for 20%, 60%, and 80%MVC. Application: This experimental result would be used for basic data for the subjective rating of grip strength pattern by the target force level when the voluntary muscle is contracted.

• 대한인간공학회지
• /
• 제35권5호
• /
• pp.361-370
• /
• 2016

Objective:The aim of this study is to evaluate contributions of individual finger forces associated with various levels of submaximal voluntary contraction tasks. Background: Although many researches for individual finger force have been conducted, most of the studies mainly focus on the maximal voluntary contraction. However, Information concerning individual finger forces during submaximal voluntary contraction is also very important for developing biomechanical models and for designing hand tools, work equipment, hand prostheses and robotic hands. Due to these reasons, studies on the contribution of individual finger force in submaximal grip force exertions should be fully considered. Method: A total of 60 healthy adults without any musculoskeletal disorders in the upper arms participated in this study. The young group (mean: 23.7 yrs) consisted of 30 healthy adults (15 males and 15 females), and the elderly group (mean: 75.2 yrs) was also composed of 30 participants (15 males and 15 females). A multi-Finger Force Measurement (MFFM) System developed by Kim and Kong (2008) was applied in order to measure total grip strength and individual finger forces. The participants were asked to exert a grip force attempting to minimize the difference between the target force and their exerted force for eight different target forces (5, 15, 25, 35, 45, 55, 65, and 75% MVCs). These target forces based on the maximum voluntary contraction, which were obtained from each participant, were randomly assigned in this study. Results: The contributions of middle and ring fingers to the total grip force represented an increasing trend as the target force level increased. On the other hand, the contributions of index and little fingers showed a decreasing trend as the target force level increased. In particular, Index finger exerted the largest contribution to the total grip force, followed by middle, ring and little fingers in the case of the smallest target force level (5% MVC), whereas middle finger showed the largest contribution, followed by ring, index and little fingers at the largest target force levels (65 and 75% MVCs). Conclusion: Each individual finger showed a different contribution pattern to the grip force exertion. As the target force level increase from 5 to 75% MVC, the contributions of middle and ring fingers showed an increasing trend, whereas the contributions of index and little fingers represented a decreasing trend in this study. Application: The results of this study can be useful information when designing robotic hands, hand tools and work equipment. Such information would be also useful when abnormal hand functions are evaluated.

• 동의생리병리학회지
• /
• 제34권3호
• /
• pp.142-148
• /
• 2020

The purpose of this study was to evaluate the validity of Deficiency and Excess Pattern Identification Questionnaire. The number of subjects enrolled in this study was 431. Pearson Correlation Coefficient analysis were conducted to reveal the correlation among Deficiency and Excess Pattern Identification Questionnaire, Grip Strength and Quality of life. ROC-curve analysis were used to suggest optimal cut off value. Cohen Kappa also used to analyze for diagnostic validity. The significant p-value was < .05. The Deficiency questionnaire had positive correlation with the score of the expert and negative correlation with Grip Strength and Quality of life (p<.001). The Excess questionnaire had positive correlation with the score of the expert and negative correlation with Quality of life (p<.001). The optimal cut off value was 56.5 to separate deficiency and non deficiency and 47.5 to separate excess and non-excess. Furthermore, AUC was .900 and .851 accordingly. Cohen Kappa value between deficiency questionnaire and the expert was .640. Cohen Kappa value between excess questionnaire and the expert was .513. This study reveals that Deficiency and Excess Pattern Identification Questionnaire is valid. However, further study considering of gender, age, and health condition and so on, is needed.

• 고령자･치매작업치료학회지
• /
• 제12권2호
• /
• pp.47-55
• /
• 2018

목적 본 연구는 요양병원 노인에서 수면의 질에 따른 손 기능 변화와 수면의 질과 손 기능, 수면 장애 요인간의 상관관계를 알아보고자 하였다. 연구방법 2017년 11월부터 2018년 1월까지 6개월 이상 입원중인 23명의 환자를 대상으로 수면 측정도구 A를 사용하여 수면의 질, 악력계를 이용하여 악력을 평가 하였고 BBT, 9-Hole Peg test를 사용하여 협응력을 평가 하였다. 수집된 자료는 SPSS 21.0 통계 프로그램을 사용하여 대응 표본 t-검정, 피어슨 상관분석을 실시하였다. 연구결과 수면 점수 '상' 집단에서는 수면의 질과 BBT 간에, 악력과 BBT 간에 상관관계를 보였고 '중' 집단에서는 악력과 BBT 간에 상관관계를 보였다. 두군 모두에서 수면의 질과 수면 양상 간의 유의미한 높은 상관관계를 보였다. 결론 요양병원에 입소한 노인 중 수면 장애의 질적 차이를 보일 때 BBT와 악력 향상을 위한 치료의 병행은 수면의 질을 향상시킬 수 있으며 수면 양상 중재는 수면의 질을 개선하는데 효과적일 것으로 생각 된다.

• Steel and Composite Structures
• /
• 제45권6호
• /
• pp.797-818
• /
• 2022

Steel-precast ultra-high-performance concrete (UHPC) composite beams with demountable high-strength friction-grip bolt (HSFGB) shear connectors can be used for accelerated bridge construction (ABC) and achieve excellent structural performance, which is expected to be dismantled and recycled at the end of the service life. However, no investigation focuses on the demountability and reusability of such composite beams, as well as the installation difficulties during construction. To address this issue, this study conducted twelve push-out tests to investigate the effects of assembly condition, bolt grade, bolt-hole clearance, infilling grout and pretension on the crack pattern, failure mode, load-slip/uplift relationship, and the structural performance in terms of ultimate shear strength, friction resistance, shear stiffness and slip capacity. The experimental results demonstrated that the presented composite beams exhibited favorable demountability and reusability, in which no significant reduction in strength (less than 3%) and stiffness (less than 5%), but a slight improvement in ductility was observed for the reassembled specimens. Employing oversized preformed holes could ease the fabrication and installation process, yet led to a considerable degradation in both strength and stiffness. With filling the oversized holes with grout, an effective enhancement of the strength and stiffness can be achieved, while causing a difficulty in the demounting of shear connectors. On the basis of the experimental results, more accurate formulations, which considered the effect of bolt-hole clearance, were proposed to predict the shear strength as well as the load-slip relationship of HSFGBs in steel-precast UHPC composite beams.

• 한국전문물리치료학회지
• /
• 제29권1호
• /
• pp.28-36
• /
• 2022

Background: It is known that hand strength and fingertip force are used as an indicator of muscle strength and are also highly related to the various chronic symptoms and even lifespan. To use the individual fingertip force (IFF) as a quantitative index for clinical evaluation, the IFF should be measured and analyzed with various variables from various subjects, such as the normal range of fingertip force and the difference in its distribution by disease. Objects: We tried to measure and analyze the mean maximum IFF distribution during grasping a cylindrical object in healthy adults and patients with spinal cord injury (SCI). Methods: Five Force-sensitive resistor (FSR) sensors were attached to the fingertips of 24 healthy people and 13 patients with SCI. They were asked to grip the object three times for five seconds with their maximum effort. Results: The mean maximum IFF of the healthy adult group's thumb, index, and middle finger was similar statistically and showed relatively larger than IFF of the ring and small finger. It is a 3-point pinch grip pattern. All fingertip forces of patients with SCI decreased by more than 50% to the healthy group, and their IFF of the middle finger was relatively the largest among the five fingertip forces. The cervical level injured SCI patients showed significantly decreased IFFs compared to thoracic level injured SCI patients. Conclusion: We expect that this study results would be helpful for rehabilitation diagnosis and therapy goal decision with robust further study.

• PNF and Movement
• /
• 제21권3호
• /
• pp.319-326
• /
• 2023

Purpose: The purpose of this study was to investigate the effects of modified ankle movement patterns on participants' active dorsiflexion range of motion and leg muscle activity. Methods: This study recruited twenty-five participants, all of whom were healthy individuals with no abnormalities in the ankle or knee joints. The research methodology involved measuring the active dorsiflexion range of motion and muscle activity in each person's legs based on the presence or absence of toe extension while the subjects were in a comfortable, supine position. A statistical analysis was conducted using SPSS 25.0, and a paired samples t-test was employed. The significance level was set at 0.05. Results: When the participants demonstrated the modified ankle movement pattern with a controlled toe grip, there was an increase in their active dorsiflexion angle. However, during the proprioceptive neuromuscular facilitation technique without a controlled toe grip, a higher level of activity was observed in the leg muscles. Conclusion: The results of this study could be used as foundational data for establishing a rehabilitation exercise program designed to enhance range of motion and muscle activation in the ankle joint.

• PNF and Movement
• /
• 제18권1호
• /
• pp.1-10
• /
• 2020

Purpose: This study was conducted to examine the effects of a PNF intervention using elastic bands on edema, range of motion (ROM), and pain in post-mastectomy patients with upper limb lymphedema, according to their hand grip type. Methods: The subjects were 14 female patients who were at Stage II lymphedema after undergoing mastectomy for Stage II breast cancer. They were randomly divided into an experimental group (n =7) and a control group (n = 7). Both groups participated in a treatment program four times (one time under the therapist's instructions and three times as self-exercise) a week for 4 weeks. Both groups repeated an upper limb PNF pattern exercise for 30 min using elastic bands after receiving a manual lymph drainage treatment for 1 hour. Here, subjects in the experimental group performed the PNF exercise with an open-hand grip by putting their hands into the loops of elastic bands and keeping their fingers spread out. Subjects in the control group performed the PNF exercise with a closed-hand grip by holding the loops of elastic bands with their fingers. In both groups, the subjects' edema, ROM, and pain levels were measured before the intervention and 2, 3 and 4 weeks after the intervention. Results: As a result of the experiment, both groups demonstrated edema reductions, ROM increases, and pain reductions in four areas of the upper limbs. Notably, the experimental group exhibited larger ROM increases in flexion, extension, and abduction as well as greater edema and pain reductions than the control group. In particular, the most significant effects were found in the elbow of the four upper limb areas for edema reductions and in extension for ROM increases. Conclusion: The present study indicates that exercise therapy-based approaches using elastic bands in post-mastectomy patients with upper limb lymphedema can have different effects depending on the type of hand grip (open or closed), which is the body's most distal part. Therefore, these approaches should be based on the conditions of the distal parts of the patient's body for their effective applications in clinical practice.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1995년도 춘계공동학술대회논문집; 전남대학교; 28-29 Apr. 1995
• /
• pp.656-666
• /
• 1995

본 논문에서는 물체위로 투사된 line stripe으로부터 물체의 표면 정보를 추출하기 위해 2-D Grip paper를 이용해 캘리브레이션하는 방법이 제안되었다. 카메라의 이미지평면과 카메라의 가시범위에 있는 3차원 실세계간의 Projective Tranformation과정에서는 목표물과 이미지 평면사이의 거리나 각도 등이 정보를 실제로 측정해서 알고 있어야만 카메라와 실세계간의 캘리브레이션을 수행할 수 있다. 그러나 이미 크기나 거리를 알고 있는 Grid paper를 이용하면 카메라의 파라미터들에 대한 추정이나 카메라와 실세계간의 측정을 하지 않고서도 목표물위로 투사된 line stripe에 대한 정보를 얻을 수 있고 이를 이용해 물체의 표면에 대한 정보를 얻을 수 있다. 이미 지평면에 투영된 격자패턴에서 구한 교차점들의 위치를 이용해 실제 위치를 찾아낸다. 실제로 레이져스캐너를 이용해 물체위로 line stripe을 투사한 후, 위에서 제시한 방법을 통해 3차원 정보를 구하는 실험결과는 양호하였다.

• 대한가정학회지
• /
• 제43권6호
• /
• pp.27-35
• /
• 2005

The purpose of this study was to develop motorcycle wear with built-in airbag protection for enhanced comfort and fit. Based on the survey results, a motorcycle jacket was designed using. Aauto CAD. This study concentrated on the wearing comfort comparison of the motorcycle jacket developed from this research with that of and foreign goods. To evaluate the wearing comfort, 3 types of motorcycle jackets were used. The results of this study were as follows. : From an Analysis of the differences in wearing comfort, the motorcycle jacket developed proved to be more convenient than the 2 types of foreign motorcycle jackets in terms of the standing and handle grip posture. This effect was due to the curved pattern of the neckline part of the airbag. The air pressure of the airbag must be improved.