• Resources Recycling
• /
• v.11 no.2
• /
• pp.20-27
• /
• 2002

This study was to develop the triboelectrostatic separation technique to recycle the coal from about 20% of mill reject products remained by grinding process in the coal thermoelectric power plant. In this study, we get a test results that can product the cleaned coal of 15% ash content and 66.23% recovery from mill reject of 47% ash content. And then, from the result of the releases analysis, we proved the excellence of treatment method, after showing the treament processing which is able to get 80% of recovery of coal from 20% of ash content demanded in the power plant.

• Food Science and Biotechnology
• /
• v.17 no.4
• /
• pp.814-818
• /
• 2008

Com and rice starches were physically modified by planetary mill. While native starches showed high peak viscosities (1,001 and 563 cp), it decreased largely (42 and 20 cp for rice and com starch, respectively) after 2 hr of physical modification. When two starches were co-ground, peak viscosities decreased more largely than single ground one only in 30 min, indicating the pasting properties could be easily changed by co-grinding. Especially, the higher the amount of com starch, the viscosity decreased more largely, which means that paste stability could be controlled also by changing the ratio of com and rice starch. Mean particle size increased with physical modification time since particles became spread because of shear force. There were also changes in surface morphology after physical modification. Fluid property, such as mean time to avalanche (MTA), was improved (from $6.16{\pm}0.47$ and $8.37{\pm}1.23\;sec$ to $5.47{\pm}0.78$ and $5.26{\pm}1.37\;sec$ for rice and com starch, respectively) by physical modification. Pasting property, such as swelling power, was also improved by physical modification. These mean that native starches can be applied to both conventional powder and new paste-food industry more efficiently by physical modification.

• Journal of Power System Engineering
• /
• v.22 no.6
• /
• pp.58-66
• /
• 2018

The use of external gear pumps is an effective way to achieve adequate performance at low cost when composing hydraulic systems. The biggest drawback, on the other hand, is the accompanying noise. Gears of continuous contact shape are actively used for the pump recently. The continuous contact shape must be the helical type due to the nature of the gear pump that is driven only by the drive gear. In this paper the theoretical shape of continuous contact gear is analyzed using simple rack shape of straight lines and two circular arcs. Using such geometry, the theoretical equation will be developed by envelope curves according to the conjugate gear shape rules. After checking the validity of the theory by the shape of gear rules, the grinding shape was also developed. The 3D shapes using equation can be also drawn. It was also shown that contact ratio and radius of curvature are easily developed by the theoretical equations.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.11a
• /
• pp.277-280
• /
• 2003

The purpose of this study is for the active use of the fly ash, which is a by-product of the combustion pulverizes coal thermal power plants, to compensate for the lack of landfill and for conservation of energy, by using fly ash as the supplementary cementitious material, and to prove its possibility as the related products of the cement. First of all, we examined strength development of Micro grinding fly ash by elevating its fineness and using $Na_{2}SO_{4}$ as an activator to elevate pozzolanic reaction of fly ash. Following fly ash replacement ratio and curing temperature we hope to prove its properties to suggest its possibility in the concrete and cement industry. In case of water curing, the more fineness and higher annexing of activator is, the higher strength is, and the higher curing temperature is the more pozzolanic reaction happens.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.08a
• /
• pp.208-216
• /
• 1999

Nowadays coustomer's needs for high surface quality steel sheet has greatly increased, so it is necessary to pay more attention to the roll grinding, texturing and handling. POSCO can acquire high surface quality roll and high productivity through World-first fully automated Roll Shop system which had been constructed '94.10.1∼'97.8.28 at Kwangyang Works. Roll Shop Automation System consists of Level-I, II, III control system and 23 automated machines. After the completion of the construction, the system started smoothy and keeps its operation with high productivity as expected. The installation of this system gave an epoch-making man power saving. This paper introduce its main facilities and operation.

• Journal of Korean Institute of Industrial Engineers
• /
• v.26 no.2
• /
• pp.165-170
• /
• 2000

In order to perform a successful material cutting process, the operators are to select the suitable machining tools and cutting conditions for the cutting environment. Up to now, this has been a complicated procedure done by the data in the tool manufacturers' paper catalog and the operator's experiencial knowledge, so called heuristics. This research is motivated by the fact that using computer techniques in processing vast amount of data and information, the operator can determine the tool and cutting condition easily. In the developed program, the selection of milling cutter, insert, and components are combined to provide optimal cutting speed, depth of cut, feed rate, rpm, and power. This program also provides the selection routine for end mill, drilling, turning, and grinding where the suitable tools are selected by workpiece, holder type, cut type, and insert shape.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.990-995
• /
• 2008

During the ship's construction process, most high place workings have been carried out by human power, like welding, grinding and so on. Because of the ability to relieve human beings from these, the need of developing a hull-plate moving robot has been rising. This paper describes a hull-plate moving robot, using magnet modules as the adhesive method. Magnet modules maintain the magnetic force between hull-plate and magnets constantly. So that allows the robot to perform movements on the curved plate without the loss of adhesive force. The robot consists of driving motors, control system and magnet modules. The performance of the robot is verified on the curved plate.

• Proceedings of the KIPE Conference
• /
• 2006.06a
• /
• pp.158-162
• /
• 2006

A lot of pieces of iron plate are used to build a ship. The states of cutting surface of iron are however bended or ununiformly cuttled by cutting machine. These may cause bad Quality of painting, and shorter lifetime of iron by rust. In this paper, a new approach of grinding force control method which teaching of robot is not required is proposed to avoid long preparation time of robot and to improve the productivity. The way used in this paper is just like a blind man works through the road with stick only.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2016.10a
• /
• pp.45-46
• /
• 2016

As coal fly ash emissions have increased due to additional constructions of domestic heat power plants, the amount of embedded reject ash (Rj henceforth) is increasing as well. Most Rj is embedded, so if it is used as an alternative admixture instead of cement, embedded quantities will decrease, leading to economic and environmentally positive effects. Therefore this study conducted an experiment to contemplate the usability of Rj ground in the Los Angeles abraser, and what effects ground Rj has on the engineering properties of high compressive strength mortar. The result was that as the number of grinding turns increased, liquidity, air quantity and intensity were improved, proving Rj a possible alternative admixture to cement.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2016.10a
• /
• pp.96-97
• /
• 2016

As coal fly ash emissions have increased due to additional constructions of domestic heat power plants, the amount of embedded reject ash (Rj henceforth) is increasing as well. Most Rj is embedded, so if it is used as an alternative admixture instead of cement, embedded quantities will decrease, leading to economic and environmentally positive effects. Therefore this study conducted an experiment to contemplate the usability of Rj ground in the Los Angeles abraser, and what effects ground Rj has on the engineering properties of poor-mix mortar. The result was that as the number of grinding turns increased, liquidity, air quantity and intensity were improved, proving Rj a possible alternative admixture to cement.