• 한국세라믹학회지
• /
• 제39권8호
• /
• pp.721-727
• /
• 2002

고함량 PbO계 조성 PDP 격벽용 유리의 경우, 광학적, 기계적 및 전기적 물성들을 만족시키며, 동시에 높은 온도에서 열처리공정을 거쳐야 하므로, 유리의 조성-물성-공정상의 trade-off가 발생하여, 이를 극복하기 위한 방안으로서 유리의 결정화가 유효하다. 이에 본 연구에서는 고함량 PbO계 조성 PDP 격벽용 후보 유리계의 최적결정화조건을 확립하고자 열시차분석법(DTA)에 의한 결정화 특성을 연구하였다. $62PbO-19B_2O_3-10SiO_2-9(Al_2O_3-K_2O-BaO-ZnO)$(in wt%) 조성계의 유리에 결정핵생성 및 성장을 위해 $TiO_2$를 3 wt%를 첨가한 수, 용융/냉각/분쇄 처리 후 얻어진 유리 분말을 $445^{\circ}C$에서 각각 1∼10시간 열처리하여 핵생성을 시켰으며, 이렇게 얻어진 각 유리 분말은 각기 $5∼25^{\circ}C/min$의 가변 승온속도로 DTA 측정을 하였다. DTA 결정화 피크 온도는 승온속도가 높아짐에 따라 증가하였고, 열처리 시간이 증가함에 따라 감소하였다. Avrami 변수는 1에 근사하는 값이 얻어져서, 표면결정화가 우선하였으며, 최대 핵생성 처리시간은 2시간이었다.

• 한국생산제조학회지
• /
• 제18권3호
• /
• pp.285-293
• /
• 2009

Thermal infrared cameras have been conducted actively in various application areas, such as military, medical service, industries and cars. Because of their characteristic of sensing the radiant heat emitted from subjects in the range of long-wavelength($3{\sim}5{\mu}m$ or $8{\sim}12{\mu}m$), and of materializing a vision system, when general optics materials are used, they don't react to the light in the range of long-wavelength, and can't display their optic functions. Therefore, the materials with the feature of higher refractive index, reacting to the range of long-wavelength, are to be used. The kinds of materials with the characteristic of higher refractive index are limited, and their features are close to those of metals. Because of these metallic features, the existing producing method of optical systems were direct manufacturing method using grinding method or CAD/CAM, which put limit on productivity and made it difficult to properly cope with the increasing demand of markets. GASIR, a material, which can be molded easily, was selected among infrared ray optics materials in this study, and the optical system was designed with two Aspheric lenses. Because the lenses are molded in the environment of high temperature and high pressure, they require a special metallic pattern. The metallic pattern was produced with materials with ultra hardness that can stand high temperature and high pressure. As for the lens mold, GMP(Glass Molding Press) of the linear transfer method was used in order to improve the productivity of optical systems for thermal infrared cameras, which was the goal of this paper.

• The Journal of Advanced Prosthodontics
• /
• 제11권2호
• /
• pp.128-137
• /
• 2019

PURPOSE. The aim of this study was to compare the effect of different finishing and polishing techniques on water absorption, water solubility, and microhardness of ceramic or glass-polymer based computer-aided design and computer-aided manufacturing (CAD/CAM) materials following thermocycling. MATERIALS AND METHODS. 150 disc-shaped specimens were prepared from three different hybrid materials and divided into five subgroups according to the applied surface polishing techniques. All specimens were subjected up to #4000 grit SiC paper grinding. No additional polishing has been done to the control group (Group I). Other polishing procedures were as follows: Group II: two-stage diamond impregnated polishing discs; Group III: yellow colored rubber based silicone discs; Group IV: diamond polishing paste; and Group V: Aluminum oxide polishing discs. Subsequently, 5000-cycles of thermocycling were applied. The analyses were conducted after 24 hours, 7 days, and 30 days of water immersion. Water absorption and water solubility results were analyzed by two-way ANOVA and Tukey post-hoc tests. Besides, microhardness data were compared by Kruskal-Wallis and MannWhitney U tests (P<.05). RESULTS. Surface polishing procedures had significant effects on water absorption and solubility and surface microhardness of resin ceramics (P<.05). Group IV exhibited the lowest water absorption and the highest microhardness values (P<.05). Immersion periods had no effect on the microhardness of hybrid ceramic materials (P>.05). CONCLUSION. Surface finishing and polishing procedures might negatively affect physical properties of hybrid ceramic materials. Nevertheless, immersion periods do not affect the microhardness of the materials. Final polishing by using diamond polishing paste can be recommended for all CAD/CAM materials.

• 한국염색가공학회지
• /
• 제27권2호
• /
• pp.149-154
• /
• 2015

To investigate the biodegradation of the cellulose powder(CP) derived from Styela clava tunics(SCT), some physico-chemical properties and biodegradability of SCT-CP were measured after the incubation for 45 days. The particles size of SCT-CP prepared with washing, bleaching, drying, and grinding processes was $150-400{\mu}m$ although most of particles (70%) was more than $400{\mu}m$. The cellulose structures of SCT-CP detected using the X-ray diffraction and DSC analysis was very similar with that of wood pulp powder(WP-CP). The glass transition temperature was not detected in both samples. Furthermore, more than 90% of the SCT-CP was degraded, whereas only over 70% of the WP-CP was degraded after the incubation for 45 days. Therefore, these results suggest the possibility that SCT-CP is particularly applicable to prepare medical fiber and film for disease treatment.

• 대한기계학회논문집A
• /
• 제36권12호
• /
• pp.1591-1597
• /
• 2012

복합재료 접합부의 접착강도에 대한 접착면 성질의 영향을 알아 보기 위해 불포화폴리에스테르, 우븐과 매트 유리섬유를 사용하여 복합재료 접합시편들을 제작하였다. 접착제, 복합재료 접착물, 말단접합과 이차접합 시편들의 기계적 성질을 실험에 의해 구하고 실험결과를 접합이론에 적용하였다. 6 개의 접합부들에서 발생하는 최대 및 평균 전단 응력은 최대 인장력과 접합 시편의 기하학적 변수들로부터 계산되었다. 실험 결과 접합면을 연마한 후 아세톤으로 처리한 경우가 말단접합의 3 가지 형태 중 가장 큰 강도를 가지고 있음이 관찰되었다. 마찬가지로 매트-매트와 매트-우븐 접합이 거의 같은 값으로 이차 접합의 3 가지 형태 중 가장 큰 강도를 가지고 있었다. 반대로 아무 처리도 하지 않은 접합시편과 우븐-우븐 접합시편은 매우 낮은 강도를 가졌다. 각각의 경우 파손은 접합부 양끝에서 심하게 발생하였고 접합부 가운데로 이동하였다.

• 한국전기전자재료학회논문지
• /
• 제23권12호
• /
• pp.978-982
• /
• 2010

For mass information transfer, the optical communication using optic fiber has been widely used. Especially, in the field of medical image, the large data is digitalized based on the standard image and it is used for telemedicine with this method. Therefore, to transfer the large amount of data fast and effectively POF (Plastic Optical Fiber) can be used and the development of optic connector for connection between POFs is very important. In this study, for stable optical coupling of POF optic fiber Ferrule and Sleeve were designed and produced by considering the bond stability and the insertion loss according to the physical contact and roughness profile was evaluated. As a result of examining the insertion loss by physical contact method of two optic fibers, it showed the loss was about 1.895dB. According to the results from studying the condition of grinding section for POF mass production, the mass production condition was established as POF profile roughness of 6nm and the loss of 0.2dB or lower by controlling the film size and time step by step.

• Computers and Concrete
• /
• 제20권2호
• /
• pp.197-204
• /
• 2017

Typically, high lime fly ash (Class C) has been characterized as a fly ash, which at lower replacement levels is not as effective as the low lime (Class F) fly ash, in mitigating alkali-silica reaction (ASR) in portland cement concrete. The influence of fineness of Class C, obtained by grinding virgin fly ash into finer particles, on its pozzolanic reactivity and ASR mitigation performance was investigated in this study. In order to assess the pozzolanic reactivity of mortar mixtures containing virgin or ground fly ashes, the strength activity index (SAI) test and thermo-gravimetric analysis (TGA) were conducted on the mortar cubes and paste samples, respectively, containing virgin fly ash or two ground fly ashes. In addition, to evaluate any improvement in the ASR mitigation of ground fly ashes compared to that of the virgin fly ash, the accelerated mortar bar test (AMBT) was conducted on the mortar mixtures containing different dosages of either virgin or ground fly ashes. In all tests crushed glass aggregate was used as a highly reactive aggregate. Results from this study showed that the finest fly ash (i.e., with an average particle size of 3.1 microns) could increase the flow ability along with the pozzolanic reactivity of the mortar mixture. However, results from this study suggested that the fineness of high lime fly ash does not seem to have any significant effect on ASR mitigation.

• Mycobiology
• /
• 제38권1호
• /
• pp.33-38
• /
• 2010

We have successfully applied the nested PCR to detect Cylindrocarpon destructans, a major pathogen causing root rot disease from ginseng seedlings in our former study. The PCR assay, in this study, was used to detect the pathogen from soils. The nested PCR using internal transcribed spacer (ITS) 1, 4 primer set and Dest 1, 4 primer set maintained the specificity in soils containing various microorganisms. For a soil DNA extraction method targeting chlamydospores, when several cell wall disrupting methods were tested, the combination of lyophilization and grinding with glass beads, which broke almost all the chlamydospores, was the strongest. The DNA extraction method which was completed based on the above was simple and time-saving because of exclusion of unnecessary stages, and efficient to apply in soils. As three ginseng fields whose histories were known were analyzed, the PCR assay resulted as our expectation derived from the field information. The direct PCR method will be utilized as a reliable and rapid tool for detecting and monitoring C. destructans in ginseng fields.

• 한국해양환경ㆍ에너지학회지
• /
• 제16권1호
• /
• pp.53-59
• /
• 2013

1990년대 이후, 중소형 폐 선박으로부터 생성되는 FRP를 재활용하기 위한 방법으로 층상으로 배열된 로빙층과 매트층을 분리하는 것은 친 환경적이면서도 경제적 재활용의 장점을 가지고 있다. 그러나 효율적으로 로빙층과 매트층을 분리하는 기술과 로빙층은 매트층에 비해 얇은 두께로 존재한다는 이유로 인해 로빙층을 매트층과 분리할 때 기계가 자동적으로 층간의 차이를 인식하는 방법은 아직 개발이 이루지지 않고 있다. 본 연구에서는 유리의 구성비가 다른 두 층의 화학적 성질의 차를 이용하여 광학적으로 층간 인식이 가능한 방법을 모색하였다. 또한 다양한 로빙층의 구성에도 자동적으로 절단위치를 분석하는 절단시스템과 최종생산물의 유용성을 확보할 수있는 다양한 크기의 유리섬유를 생산할 수있는 세단기를 개발하였다. 본 연구 결과로 광학적 인식기술과 유연한 절단기술 그리고 다양한 세단기술이 융합된 폐 FRP의 분리 공정의 단순화와 자동화를 달성하게 되었다.

• 한국안광학회지
• /
• 제16권2호
• /
• pp.107-115
• /
• 2011

목적: 안경렌즈 조제가공을 위한 보급형 전자동 옥습기 개발을 위해 설계하고 제작하고자 한다. 방법: 보급형 전자동 옥습기의 주요 설계도를 캐드로 그려서 제작에 필요한 정보를 얻었다. 이 데이터를 기본으로 보급형 자동옥습기 개발을 위해 시제품을 제작 하였다. 결과: 무패턴 모드는 외부 자동 취형기에서 안경테의 렌즈삽입부 정보를 RS232C 전송방식으로 형판 없이도 작동할 수 있었고, 패턴 모드는 형판을 이용해서 개발품의 좌측에 장착하여 작동할 수 있었다. 보급형 자동옥습기는 헤드부, 오토암부, 형판고정부 그리고 연삭부와 같은 주요 요소들로 구성되었다. 헤드부는 좌우모터와 상하모터의 작동을 이용하여 안경렌즈의 연삭을 제어하였다. 연삭부는 유리 재질, 플라스틱 재질, V-홈 그리고 광택을 낼 수 있는 연삭휠로 구성하였다. 슬라이드는 고정된 형판의 하부에 구비되었고, 고정 샤프트에 의해 회전되는 형판이 슬라이드부에 의해 지지할 수 있었다. 형판고정부는 안경사의 수동적인 조작에 의해 헤드파트를 승강 및 좌우 이동시킬 수 있게 하였다. 연삭휠의 분당 회전수를 3,600 rpm으로 최적화 하였다. 결론: 패턴리스와 패턴 렌즈 가공이 가능한 보급형 자동옥습기를 설계 및 제작하여 시제품 제작에 성공하였다. 최소의 비용으로 효율적이고 간편하게 조제가공이 가능하여 안경사들에게 큰 도움이 될 수 있을 것으로 예상된다.