• Tribology and Lubricants
• /
• 제27권5호
• /
• pp.269-274
• /
• 2011

The purpose of this paper is to study and analyze the improvement method for the failure examples including the vehicle brake system in actual field. It was verified that the indicator plate of pad wear scratched the brake disk because of wearing after displacement of non- identification parts pad. The caliper of other vehicle was installed with brake system verified the phenomenon produced groove in center point because of one side wear when the pad was not fully contacted with the rub disk by other action surface pressure and pad action condition. It verified that the crack phenomenon fatigue was produced by brake thermal deformation because of decreasing the thickness by grinding to modify the non-uniformed wear of brake disk. It verified that the friction sound was produced by the friction phenomenon because of non-uniformed contact of lining and an alien substance with inner of the drum and lining braking by crack phenomenon with brake drum surface.

• 대한치과기공학회지
• /
• 제9권1호
• /
• pp.51-55
• /
• 1987

One of the primary advantages of acrylic resin teeth is their ability to bond chemically to the denture base resins. Fracture od acrylic resin teeth from a maxillary denture, however, is not uncommon. Bonding failures have been attributed to faulty boil-out procedures that fail to eliminate all traces of wax from the ridge lap surfaces of the teeth and to contamination of the ridge lap surface by careless application of tinfoil substitute. Attempts to increase the strength of the bond between acrylic resin teeth and heat-cured denture base resin include grinding the glossy ridge lap surface (in fluid system), painting the ridgelap surface of the teeth with monomer-polymer solution, and cutting retention grooves in the ridge lap surface of the teeth. This latter method has been tested by applying a tensile force in a labial direction to the incisal part of the lingual surface of the acrylic resin teeth. A progressive shear compressive load was applied at an angle to the lingual surface of acrylic resin teeth bonded to denture base acrylic resin. No statistically singificant advantage was derived by preparing retention grooves of different shapes in the ridgelap surface of the denture teeth.

• 한국정밀공학회지
• /
• 제30권5호
• /
• pp.544-551
• /
• 2013

Recently high speed mixer, which is mixing, grinding, dispersion for liquid-liquid material, has been widely used several industries such as food, cosmetics, pharmaceuticals, fine chemicals, electronic material. This high speed mixer has a core element part called particle separation device. Particle separation device, which makes mixed liquid and liquid material using shear forces from a rotor and a stator, is a decisive factor in the distributed parts. In this study, we examined the velocity distribution of the two models of particle separation device using computation fluid dynamics, so that we were able to see the difference of the velocity distribution according to the shape. Also, by experiment, we observed that the use of rotor-screen type is deemed more suitable in case of accurately considering the effect of improving of the dispersibility through the circulation of the future.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.115-116
• /
• 2002

This study was carried out as one of efforts to overcome difficulties in air bearing design due to low stiffness and low damping. Hydrodynamic effects on hydrodynamic stiffness of a fluid film in a high speed air bearing with tow-row air sources are investigated. The hydrodynamic effects by the high speed over DN 1,000,000 and eccentricity of a proceeding which are not considered in conventional design of an air bearing need to be reconsidered. The hydrodynamic effects, which dominantly influence on the load capacity of air bearing, are caused mainly by proceeding speed, eccentricity, and the source positions. The two-row source arrangement in the air bearing produces quite unique hydrodynamic effects with respect to pressure distribution of the air film. Optimal arrangement of the two-row sources improves performance of an air bearing in film reaction force and loading capacity of high speed spindles. This study compares the pressure distribution by numerical simulation as a function of eccentricity of proceeding and the source positions. The air source position 1/7L form one end of an air bearing was found to be superior to source position of 1/4L. The dynamic stiffness were obtained using a two-dimensional cutting method which can directly measure the cutting reaction forces and the displacements of the spindle in two directions using a tool dynamometer and transducer sensors. Heat generation in the air film can not be negligible over the speed of DN 2,000,000. In order to analysis effects of heat generation on the characteristics of air bearing, high cooling bearing spindle and low cooling bearing spindle were tested and compared. Characteristics of the frequency response of shaft and motion of run out errors were different for the spindle. The test results show that, in the case of low cooling bearing spindle, the stiffness became smaller due to heat generation. The results, which were obtained for high speed region, may be used as a design information for spindle which can be applied to precision devices such as ultra precision grinding and ultra high speed milling.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제14권3호
• /
• pp.185-193
• /
• 1992

The calcifying odontogenic cyst was identified as a pathological entity by Gorlin & his associates in 1962. This lesion is one of the rarest and most disputable cysts in the oral region. The calcifying odontogenic cyst has variable clinical and radiological features. We review the previous literatures and report 2 cases of calcifying odontogenic cyst at Department of Oral and Maxillofacial Surgery, Kyung-Hee University. The 1st case was as follows. The patient vas 22 year old female. The past dental history revealed extraction of prolonged retained #73 tooth about 15days ago. She complained a painful swelling on the lower anterior teeth area. There were chin and vestibular swelling on the lower anterior teeth area, tenderness and missing of #33 tooth. The radiograph revealed well-demarcated unilocular radiolucency containing radiopaque calcific flecks around impacted #33 tooth. The clinical diagnosis was COC, so surgical enucleation was done. There was no recurrence and COC was confirmed by pathologist. The second case was as follows. The patient was 72 year old male. The past history revealed inactive tuberculosis, bronchial asthma and denture construction. The chief complaint was rapidly growing mass on the lower left anterior edentulous area. The clinical findings were chin swelling protruding mass with surface ulceration, fluctuation and a few bloody fluid in aspiration. The radiograph revealed well-demarcated radiolucency mimiking the residual cyst. The biopsy result was COC. The surgical excision was done, but the lesion was recurred 10 months later. The treatment was surgical excision with aggressive peripheral bone grinding and FTSG form groin area. There was no problem during the postoperative period.

• 드라이브 ㆍ 컨트롤
• /
• 제14권4호
• /
• pp.1-8
• /
• 2017

The Down-the-Hole hammer is one of the pneumatic drill equipment used for grinding, drilling, and mining. One the advantages of which is that a reduction work efficiency at deep site are relatively small compared to other drilling methods. Due to the large vibration in the underground area, it is difficult to measure the performance of the hammer, and hammer testing requires substantial production cost and operating expenses so research on the development of the hammer is insufficient. Therefore, this study has developed a dynamic simulation model that apprehends the operating principles of an 8-inch DTH hammer and calculates performance data such as performance impact force, piston speed, and BPM. By using the simulation model, design factors related to strike force and BPM were selected, and the influence of each design factors on performance was analyzed through ANOVA analysis. As a result, be the most important for BPM and the strike force are position of upper port that push the piston in the direction of the bit and in BPM, the size of the empty space between the bits and the piston is the second most important design factor.

• 대한수의학회지
• /
• 제22권2호
• /
• pp.221-232
• /
• 1982

This paper dealt with the pathological and clinical findings on the experimentally induced rodenticide (fluoroacetate, zinc phosphide, thallium sulfate, coumarin) and NaCN poisoning of ruminants (Holstein cattle and/or Korean native goat) for the purpose of the diagnosis in the accidental rodenticide poisoning of cattle. The results observed are summarized as follows: Fluoroacetate poisoning (cattle and goat): in the clinical signs, there were depression, convulsion, dyspnea, groan, grinding of the teeth, vomiting, opisthotonus and post-mortem tympany. In the macroscopical findings, the blood was more or less poor coagulative and dark red, bloody fluid with foam in the trachea, hyperemia and hemorrhage of tracheal mucosa and lung, cloudy swelling and hyperemia of kidney, epicardial hemorrhage(cattle), and hyperemia of abomasum, intestine and brain were observed. In the microscopical findings, there were pulmonary edema and hemorrhage, necrosis of convoluted tubular epithelium and interstitial hemorrhage of kidney, focal coagulative necrosis of myocardium, hemorrhage of pancreas and spleen, dilatation of Virchow-Robin space and hyperemia of brain, and necrosis with desquamation of mucosal epithelia of abomasum and upper small intestine. In the histological lesions of the liver, lobular peripheral hyperemia, centrilobular necrosis and cytoplasmic inclusion bodies of the hetatic cells were observed. The cytoplasmic inclusion body of the hepatic cells was not seen in the affected goat, but hydropic degeneration of the hepatic cells was marked. Zinc phosphide poisoning (cattle and goat): clinically, the affected animals died in recumbent position after ataxia, dyspnea and convulsion. In the macroscopical findings, hyperemia and hemorrhage of lung, cloudy swelling and hyperemia of liver and kidney, hemorrhage of spleen (cattle), and catarrh of abomasum and small intestine were observed. In the microscopical findings, necrosis of the convoluted tubular epithelium and hyperemia of kidney, hemorrhage of spleen, hyperemia of lung, hyperemia or hemorrhage of heart, cloudy. swelling and fatty changes of hepatic cells, dilatation of hepatic central vein, hyperemia of brain, and catarrh of abomasal and small intestinal mucosae were observed. Thallium sulfate poisoning (cattle): in the macroscopical findings dark red color of blood, hyperemia and hemorrhage of lung, bloody fluid with foam in the tracheal mucosa, petechiae of tracheal mucosa, cloudy swelling and hemorrhage of liver, necrotic lesions and hemorrhage of renal cortex and epicardial hemorrhage were observed. In the microscopical findings, severe hemorrhages of the lung, cloudy swelling and necrosis of hepatic cells, hyperemia and hemorrhage of liver, focal coagulative necrosis of mycordium, necrosis of the convoluted tubular epithelium and hyperemia of kidney, hyperemia and hemorrhage of spleen and dilatation of Virchow-Robin apace in brain were observed. Coumarin poisoning (goat): the poisoned animals died in the state of groan and depression. In the macroscopical findings, poor coagulation of blood, hemorrhage of lung, cloudy swelling and severe hemorrhages of liver, cloudy swelling and hemorrhage of kidney, abomasal hemorrhage, catarrh of small intestine, and hyperemia and hemorrhage of the other organs were observed, In the microscopical findings, hyperemia and hemorrhage of lung and kidney, cloudy swelling of the convoluted tubular epithelium of kidney, severe hepatic hyperemia, cloudy swelling and hydropic degeneration of heptatic cell, and hyperemia and hemorrhage of brain and spleen were observed. NaCN poisoning (cattle and goat): clinically, there were convulsion, severe dyspnea, paresis of hind limb, depression and then rigor of four limbs. In the macroscopical findings, bright red color of blood, hyperemia and bright and red tinge of lung cloudy swelling of kidney and liver, and hyperemia of abomasum were observed. In the microscopical findings, cloudy swelling and hydropic degeneration of hepatic cell, hyperemia and edema of lung, necrosis and degeneration of the convoluted tubular epithelium and hemorrhage in kidney, dilatation of Virchow-Robin space of brain and hemorrhage of spleen were observed.

• 대한한의학원전학회지
• /
• 제24권4호
• /
• pp.157-174
• /
• 2011

We derived following result by organizing research about processing of medicinal of before Han(漢) dynesty. The human being intake of natural substance for the purpose of treatment was what happened later than the use of natural substance as food. According to the record of by the early years of Shang(商) dynasty, we can assume that we cooked food with water and fire. The reason why there is no appearance of common production that can be included under the name of 'Tang Ye(湯液)' in the medical record discovered from Ma Wang Dui(馬王堆) is because 'Tang Ye' was yet developed. However, as the presentation of format of medicine process, there was gradual formation of medicinal fluid concept. There are quite of records on major details of cloth manufacture like washing and selection, grinding, processing of medicine from the recordings of "Wu Shi Er Bing Fang(五十二病方)", "Yang Sheng Fang(養生方)", "Za Liao Fang(雜療方)" discovered at Ma Wang Dui. It used words like 'Ze(擇)', 'Qu(去)' for the selection and 'Jiu(酒)', 'Zhuo(濯)' for the wash as a process method before cloth manufacture. When filter the processed medicine, it used words like 'Zhuo(捉)', 'Suo(索)', 'Jun(浚)' and used 'Yin Gan(陰乾)', 'Bao(暴)', 'Yang(暘)' for dry. The 'cutting(切削)' that crushes the medicine used different names based on the properties of medicines. The most frequent crush is 'Ye(冶)' and it means the powered medicine after dry. There was thermal process of mild fire(微火) and heating of 'Wen(溫)'. There are many states of medicine seen from the medical record discovered at Ma Wang Dui so they can be said as original medicine. 藥末劑 is relatively commercialized type then. Here, it includes later 湯劑 but there was no name such as 'decoction(湯)' or 'decoction of medical ingredients(湯液)'. Also, 'Fu Ju(㕮咀)' is the transformation of what was 'Fu Qie(父且)' at "Ja Liao Fang" of medical books of Ma Wang Dui with time flow. The original meaning of 'Fu Qie(父且)' is 'Fu Zu(斧俎)' and it means the crushing medicine with axe. The most important thing among the medical books of Han dynasty is "Shen Nong Ben Cao Jing(神農本草經)" and "Shang Han Za Bing Lun(傷寒雜病論)" of Zhang Zhong Jing(張仲景). "Shen Nong Ben Cao Jing" mentioned the dry method of medicine, collection and process production time, cooked and uncooked use of medicine and there are several types of medicine. Other than those, it mentioned 'Seven methods of combining herbs(七情合和)' to address cautions for combining medicines. Therefore, the 'processing of medicinal' in east Han dynasty period entered the theoretical step. However, there is only little recording on cloth manufacture of detailed medicine. From the "Shang Han Za Bing Lun" of Zhang Zhong Jing, the development in the way of 'processing of medicinal' reveled the cloth manufacture for each medicine. This tradition is continued until today and so it presents the development of purpose of 'processing of medicinal' is to greatly present the effect of medicine and to reduce the side-effect.

• 한국식품위생안전성학회지
• /
• 제29권2호
• /
• pp.79-84
• /
• 2014

본 연구는 비가열 섭취 냉동 당근주스의 HACCP (Hazard Analysis Critical Control Point)시스템 구축을 위하여 생물학적 위해요소분석을 위한 목적으로 2013년 6월 21일~2014년 3월 30일까지 약 270일간 제주도 제주시 구좌읍 소재에 있는 구좌농협에서 수행하였다. 일반적인 과채주스 제조업체의 제조공정을 참고로 하여 공정도를 작성하였으며, 원료 농산물(당근), 용수와 포장재료 입고, 보관, 세척, 분쇄, 착즙, 냉각, 내포장, 금속검출, 외포장, 보관 및 출하공정에 대하여 Fig. 1과 같이 작성하였다. 원료 당근의 세척 전, 세척 후의 Coliform group, Staphylococcus aureus, Salmonella spp., Bacillus cereus, Listeria Monocytogenes, 장출혈성대장균수를 측정한 결과 Bacillus cereus 는 세척 전 $4.70{\times}10^4CFU/g$이었으나, 세척 후 $1.02{\times}10^2CFU/g$ 검출되었으며, 나머지 병원성균은 검출되지 않았다. 자외선살균공정에서 당근주스의 유속를 변화시키면서 미생물의 변화를 시험한 결과 유속 4 L/min을 한계기준으로 결정하였다. 작업장별 공중낙하균(일반세균수, 대장균, 진균수) 시험결과 세척실의 미생물수는 20 CFU/Plate가 검출되었다. 작업자 손 세척 전후 시험결과 세척 전 일반세균수가 $6{\times}10^4CFU/cm^2$로 높게 나타났으나 손 세척 후에는 검출되지 않아 손 세척 및 소독에 대한 중요성을 교육하고 훈련해야 할 것이다. 제조설비 및 기구의 표면오염도를 검사한 결과 모든 시료에서 대장균군은 검출되지 않았고, 일반세균은 포장기 노즐에서 가장 많은 $8.5{\times}10^4CFU/cm^2$ 검출되었다. 위해분석 결과 병원성미생물을 예방, 감소 또는 제거할 수 있는 자외선살균 공정이 CCP-B (Biological)로 관리되어야 하고, 한계기준은 유속 4 L/min로 결정하였다. 따라서 Kwon의 유산균을 함유한 녹즙의 HACCP에 관한 연구에서와 같이 자외선살균 공정의 한계기준 및 이탈시 조치방법, 검증방법, 교육 훈련과 기록관리 등 철저한 HACCP 관리계획이 필요할 것으로 생각된다.