• Journal of Conservation Science
• /
• v.30 no.2
• /
• pp.205-217
• /
• 2014

The stone artifacts in Bronze age from the Sinsongri sites in Seosan, Korea were studied on material characteristics and provenance presumptions. The use and rock names of the artifacts are a stone before processing, two semifinished stone arrowheads and a grinding stone plate by slates. In addition, there is semifinished stone arrowhead by andesitic rocks. The slate could be observed easily around the site, and the andesitic rock could be confirmed typical occurrences of the all kinds of rocks around the Kanwoldo and Hwangdori, Anmyun area above 10km from the site. As a result of analysis which is comparing between stone artifacts and same kinds of raw material rocks, the stone artifacts made by slates have similar lithology and geochemical characteristics however, the stone artifacts made by andesitic rocks are found a some different part of characteristics to the same kind of raw material rocks. Comparing of major, rare earth, compatible and incompatible elements about stones artifacts made by slates and by the same kinds of raw material rocks have same geochemical patterns. However stone artifacts made by andesites and the raw material rocks are confirmed some differences of geochemistry. Therefore the slate stone artifacts in Sinsongri site suggest that these are domestic-type which are made of the rocks around the site, and it was understood that the andesitic stone artifacts are foreign-type which need to get more geological survey and study about different volcanic artifacts of the site around the area.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.14 no.6
• /
• pp.257-261
• /
• 2004

The pottery stones from the Taebek area consist of abundant quartz with kaolinite. In this study, the characteristics of pottery stones were examined by XRD (X-ray diffractometer), XRF (X-ray fluorescence spectrometer), TG-DTA and SEM (Scanning Electron Microscope). The chemical compositions of the raw ore showed 71.75 wt%$SiO_2$, 22.10 wt%$Al_2O_3$, 1.86 wt%CaO, 2.97 wt%$K_2O$, 0.62 wt%$Fe_2O_3$. When pottery stone of 3 mm size was leached at $80^{\circ}C$ with 10 % oxalic acid, the content of $Fe_2O_3$ was reduced from 0.62 wt% to 0.24 wt% and the whiteness was enhanced. Grinding of pottery stone was conducted by a planetary ball mill using media of zirconia, the average particle size was 2～5 $\mu\textrm{m}$.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.5 no.2
• /
• pp.212-225
• /
• 1995

This study was performed in a diatomite factory located at Pohang City, Kyeongsangbuk-Do. The major objectives were to evaluate sampling and analytical methods of diatomaceous earth dust. Concentrations of total and respirable diatomaceous earth dust were measured. Size distribution of dust was analyzed by a personal cascade impactor and the particle size analyzer which is an application of multiple diffraction method. Also crystalline silica in respirable and total dust samples was analyzed quantitatively by X-ray diffraction and Fourie Transform Infrared Spectroscopy(FTIR). The results were as follows: The airborne total and respirable dust concentrations, particle size distribution, and cristalline silica(quartz) concentrations showed approximately a log-normal distribution. The means of totaldust concentrations at flour maufacturing, fire brick grinding and packaging processes exceeded the Korean and American Conference of Governmental Industrial Hygienists standards, $10mg/m^3$. The size distribution of diatomaceous earth dust was log-normal and identified as the rspirable particle mass and thoracic particle mass. The crystalline silica in respirable and total dust samples was identified to quartz and contained about 10 % in those samples. Finally, it is necessary to study the applicability of multiple diffraction for particle size distribution to compare the ACGIH's size selective sampling with other materials containing crystalline silica. Also, advanced quantitative study to X-ray diffraction and FTIR methods shoud be carried out 10 verify general and specific characteristics for respirable crystalline silica.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.23 no.2
• /
• pp.41-49
• /
• 2013

Objectives: The purpose of this study was to clarify the association between serum carcinoembryonic antigen (CEA) and type of work in the shipbuilding industry. Methods: 1,072 final study subjects were admitted to a general hospital from April through July 2010 for the purpose of medical examination. Data on general characteristics such as age, smoking history, alcohol history and exercise habits was gathered through structured self-administered questionnaires. Information on job factors was collected from a medical examination, by interview and through company personnel data. Serum CEA levels were measured after eight hours' fasting and were analyzed by a radioimmunoassay. Results: On univariate analysis, the mean serum CEA level was significantly higher among married (p=0.02), older age (p<0.01), longer work time (p<0.01), smokers (p<0.01), lower education (p<0.01), and indirect and direct exposure groups (p<0.01). On multiple regression analysis, serum CEA level was influenced by smoking (p=0.001), duration of work (p=0.019), and direct exposure group (p<0.001). However, among the direct exposure group, serum CEA level was not significantly different between welding, mounting, electro-device constructive work, grinding and cleaning, and painting. Conclusions: The goal of this research was to determine if there were differences between serum CEA levels according to occupational role among shipyard workers. The direct exposure group of shipyard workers had a relatively higher level of serum CEA than did the indirect exposure group and office workers, most likely due to occupational exposure.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.14 no.1
• /
• pp.79-91
• /
• 2012

A curved fiber reinforced polymer (FRP) panel is produced with a certain width depending on allowances of manufacturing processes and facilities. An targeted arch-shaped structure could be built by sequential connection of series of the FRP panels. The connection manner between the FRP panels could be given by chemical treatment, mechanical treatment and hybrid method. Among those, the connection between the panels by chemical treatment is commonly adopted. Therefore, For an optimized design of the connected part between FRP pannels, a number of direct shear tests have been undertaken in terms of a number of parameters: surface treatment conditions, bonding materials, etc.. As results, surface grinding condition by sand paper or surface treatment by sand blasting appear properly acceptable methods, and epoxy and acryl resins are shown to be effective bonding materials for the purpose in this study.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.11 no.4
• /
• pp.114-119
• /
• 2003

The fermentative conversion of food wastes into probiotic feed was investigated by seeding of mixed inoculum of Lactobacillus acidophilus and Saccharomyces cerevisiae. After grinding finely, optimal fermentation conditions for aeration was investigated at $30^{\circ}C$, The viable cell count of lactic acid bacteria and yeast during fermentation were monitored by controlling aeration rate at each different aeration degree of 0v.v.m 0rpm, 0.25v.v.m 100rpm, 0.5v.v.m 200rpm, and 1v.v.m 500rpm respectively. The most active growth of the yeast was shown at 0.5v.v.m 200rpm as $4.5{\times}10^9CFU/m{\ell}$. By controlling aeration rate, the pH of the probiotics feed could be controlled between 4-5 for the enhancement of preservation characteristics and acceptability for cattle feeding.

• Journal of the Microelectronics and Packaging Society
• /
• v.17 no.2
• /
• pp.49-54
• /
• 2010

The n-type $Bi_2(Te,Se)_3$ powders were fabricated by melting/grinding method and were hot-pressed in order to compare thermoelectric properties of the hot-pressed specimens with those of the $Bi_2(Te,Se)_3$ ingot. Effects of mechanical milling treatment of the $Bi_2(Te,Se)_3$ powders on thermoelectric characteristics of a hot-pressed specimen were also examined. The hot-pressed $Bi_2(Te,Se)_3$ exhibited power factors of $27.3{\sim}32.3{\times}10^{-4}W/m-K^2$ which were superior to $24.2{\times}10^{-4}W/m-K^2$ of the ingot. The $Bi_2(Te,Se)_3$, hot-pressed after mechanical milling treatment of the powders, possessed a non-dimensional figure-of-merit of 1.02 at $100^{\circ}C$ and exhibited extrinsic-intrinsic transition at $130^{\circ}C$.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.3
• /
• pp.78-83
• /
• 2010

This paper presents the feasibility of incorporating ultrafine particles collected in the separator bag filter (separator bag filter cement, SBFC) during the cement manufacturing process as an substitution material for cement. SBFC does not require additional processes needed in the existing processes to manufacture high early strength cement such as modifying mineral components and adjusting the firing temperature. Moreover, it can also solve the issue of efficiency decrease resulted from the increase of the grinding time applied in the existing process of manufacturing microcement. Therefore, this research has examined the characteristics of SBFC and fresh properties and mechanical properties after making paste and mortar using SBFC in order to use SBFC as a material to gain early strength of concrete. For results, analyzing the chemical composition and physical properties of SBFC, its blaine value was $6,953cm^3/g$, about double than that of OPC, but its chemical composition showed no significant difference. According to the result of the paste and mortar examination, the paste and mortar mixed with SBFC showed a lower flowability, earlier setting time, and higher compressive strength than that with OPC. The result of microstructure analysis of paste, the paste mixed with SBFC indicated about 9% lower internal porosity at an early age than that of OPC. The compressive strength and flexural strength of mortar were higher in the order of SBFC ratio of 100, 50 and 0% SBFC.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.8 no.1
• /
• pp.24-35
• /
• 1998

Cumulative trauma disorders(CTDs) have been a growing problems for US and European industries with higher incidence rate every year. The increase and their associated costs has led companies to form committes and implement programs to address this problem. In our country, we have just started to recognize and to work on the problems in industry. This study conducted an ergonomic analysis for typical jobs of ship building industry which was not usually surveyed for CTD problem. A baseline CTD checklist which was supposed to do a risk assessment was developed and applied in this study. Initially, we considered five major parts in the checklist which consisted of personal, frequency, posture, force, and miscellaneous information. Most jobs in ship building industry were much different from typical assembly work and VDT work that have been major part of the previous CTD studies. Specifically, job characteristics in terms of frequency and posture were quite different. There were relatively long cycle time, awkward postures for whole body (not just for upper extremities). Also, CTD risk scores based on checklist were a lot higher than the scores for VDT jobs which was a case of preceding application of the checklist. Specifically, grinding jobs turned out to be the most risky one in terms of CTDs. In conclusion, usual CTD prevention guidelines are not likely to he effective in this type of industry. An individual job based interventions are strongly suggested to have a good control of CTD problems in ship building industry.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.5
• /
• pp.643-648
• /
• 2005

Near infrared reflectance spectroscopy (NIRS) has become increasingly used as a rapid, accurate method of evaluating some chemical constituents in cereal grains and forages. If samples could be analyzed without drying and grinding, then sample preparation time and costs may be reduced. This study was conducted to develop robust NIRS equations to predict fermentation quality of corn (Zea mays) silage and to select acceptable sample preparation methods for prediction of fermentation products in corn silage by NIRS. Prior to analysis, samples (n = 112) were either oven-dried and ground (OD), frozen in liquid nitrogen and ground (LN) and intact fresh (IF). Samples were scanned from 400 to 2,500 nm with an NIRS 6,500 monochromator. The samples were divided into calibration and validation sets. The spectral data were regressed on a range of dry matter (DM), pH and short chain organic acids using modified multivariate partial least squares (MPLS) analysis that used first and second order derivatives. All chemical analyses were conducted with fresh samples. From these treatments, calibration equations were developed successfully for concentrations of all constituents except butyric acid. Prediction accuracy, represented by standard error of prediction (SEP) and $R^2_{v}$ (variance accounted for in validation set), was slightly better with the LN treatment ($R^2$ 0.75-0.90) than for OD ($R^2$ 0.43-0.81) or IF ($R^2$ 0.62-0.79) treatments. Fermentation characteristics could be successfully predicted by NIRS analysis either with dry or fresh silage. Although statistical results for the OD and IF treatments were the lower than those of LN treatment, intact fresh (IF) treatment may be acceptable when processing is costly or when possible component alterations are expected.