• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.6
• /
• pp.44-51
• /
• 1997

Crinding of stainless steel, aluminium alloy, copper alloy, and titanium alloy are difficult to obtain high quality finish, because they have the mechanical properties such as low hardness, high toughness. The low hardness and the high toughness result in the loading of wheel and the poor surface finish. In order to perform the grinding operations for these sorts of materials easily, the discontinuous grinding wheel wiht multi-porous grooves has been newly developed. The multi-porous grooves inthe discontinuous grinding wheel were formed during grinding wheel manufacturing process. In this paper, discontinuous grinding wheels having intermittent ratio 0.66, 0.81 and number of grooves 18,32 have been manufactured and grinding surface characteristics of these grinding wheels for SUS304 have been analyzed. Discontinuous grinding temperature according to intermittent ratiohas been also estimated by simulation. The discontinuous grinding wheels increase the grinding performance considerably. It is desirable to use the discontinuous grinding wheel in grinding the materials with high efficiency and accuracy.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.53-56
• /
• 1995

Electrolytic In-Process Dressing grinding technique which enables application of metal bond wheels with fine superabrasives in mirror surface grinding operations has developed. This paper provides charateristic evaluation of power supply supply that we developed and general charateristics of ELID grinding. The electric behaviors are compared each about two different electrode which has 1/4, 1/6 the area of entire wheel surface, and two different fluids which has 1:50, 1:30 the quantity of water was used to dillute grinding fluids. The results show that ELID grinding method is useful for mirror surface machining.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.5
• /
• pp.85-91
• /
• 1997

Air grinding time in grinding process has a great effect on its efficiency due to low feedrate. This paper presents a reduction methos of air grinding time in cylindrical plunge grinding operation. Tje reduction of air grinding time is accomplished by finding the distance between contact point and rising point of ultra- sonic signal of the grinding wheel to workpiece. It uses a variation of sound signal generated by the flow of coolant when the grinding wheel approaches to workpiece. The ultrasonic sensor with 23 kHz center fre- quency and 8 kHz bandwidth is used to find the nearest approaching point(NAP). Monitoring and control system of the grinding conditions is implemented with CNC controller to control feedrate override and ultrasonic sensor to find NAP. The experimental result shows that the ultrasonic signal is a good measure- ment to find NAP. But it needs the considerations for the effect of the relationship between flowrate of coolant and diameter of workpiece.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1997.04a
• /
• pp.102-106
• /
• 1997

Grinding has difficulty in satisfying the qualitative knowledge based on the skilled expert as well as quantitative data for all user. Design of grinding database is based on the frame-based model for utilizing the empirical and qualitative knowledge. Inthis paper, basic strategy to develop the grinding database by frame-based model, which is strongly dependent upon experience and intuition, frame-base model, which is strongly dependent upon experience and intuition, is described. Design of grinding database is based on the frame-based model for utilizing the ambiguous knowledge and inference is accomplised by the object-oriented paradigm system.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.2
• /
• pp.107-113
• /
• 1998

Grinding operation has difficulty in satisfying the qualitative knowledge based on the skilful expert as well as the quantitative data for all user. Design of grinding database based on the frame-based model is more effective method for utilizing the empirical and qualitative knowledge. In this paper. basic strategy to develop the grinding database by taking frame-based model, which is strongly dependent upon experience and intuition, is described. Grinding database based on the frame based model for designing the interaction and inference among the slots is accomplised by the object-oriented paradigm system.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1999.10a
• /
• pp.507-512
• /
• 1999

In modern engineering practice, the grinding process is one of the most important and widely used operations for the precision finishing of components. In this paper, machining characteristics of external plunge grinding were investigated by using spindle motor current signal through hall sensor. Grinding experiments were performed in terms of various grinding conditions such as wheel speed, workpiece speed, infeed rate and spark-out time with conventional vitrified bonded WA wheel. The relationship between spindle motor current signal and metal removal rate in terms of infeed rate was induced the by analyzing spindle motor current signal.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.10a
• /
• pp.142-148
• /
• 1993

Recectly, development of expert system utilizing the domain specific knowledge focuses upon the machining operations. This paper describes an expert system for selecting the optimum grinding wheel based on the Analytic Hierarchy Process and Fuzzy Logic. Knowledge-base, in this system, for selecting of grinding wheel is designed to appling the knowhow and experience knowledge of skilled hands. In this paper, firstly determination method of fuzzy membership function utilizing the qualitative knowledge, and then selection of the optimum wheel from among the available components according to Saaty's priority rule are described. Lastly,some implementation results are suggested.

• Proceedings of the Korean Environmental Health Society Conference
• /
• 2005.06a
• /
• pp.326-329
• /
• 2005

A worker who grinded the inner parts of camshafts for automobile engines using water-soluble metalworking fluid (MWF) for 14 years was diagnosed with sinusitis. We postulated that the outbreak of sinusitis could be associated with exposure to microbes contaminated in water-soluble MWF during the grinding operation. To suggest responsible agents for this outbreak, quantitative exposure assessment for chemical and biological agents and prevalence of work-related respiratory symptoms by questionnaire were studied. The exposure ranges of MWF mist (0.59 $mg/m^3$to 2.12 $mg/m^3$) measured during grinding exceeded 0.5 $mg/m^3$ of the recommended exposure limit (REL). Grinder's exposures to bacteria, fungi and endotoxins were also generally higher than not only the proposed standards, but also those reported by several studies to identify the cause of respiratory effects. Statistical test indicated that the prevalence rate of reported symptoms related to nasal cavities showed no significant differences among the operations. Evaluation on grinding operation characteristics and quantitative exposure assessment indicated that repeated exposure to MWF mist including microbes contaminated from the use of water-soluble MWF may cause respiratory diseases like sinusitis or at least increase susceptibility to the development of sinusitis

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.2 s.173
• /
• pp.338-346
• /
• 2000

Although the net-shape molding of composites is generally recommended, molded composites are frequently required cutting or grinding due to the dimensional inaccuracy for precision machine elements . During the composite machining operations such as cutting and grinding, the temperature at the cutting point may increase beyond the allowed limit due to the low thermal conductivity of composites, which might degrade the matrix of composite. Therefore, in this work, the temperature at the cutting point during cut-off grinding of carbon fiber epoxy composites was measured. The cutting force and surface roughness were also measured to investigate the cut-off grinding characteristics of the composites. The experiments were performed both under dry and wet grinding conditions with respect to cutting speed and feed rate. From the experimental investigation, the optimal conditions for the composite cut-off grinding were suggested.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.23 no.6 s.165
• /
• pp.1011-1017
• /
• 1999

Electrolytic in-process dressing grinding technique which enables application of metal bond wheels with fine superabrasives in mirror surface grinding operations has developed. It is possible to make efficient precision machining of hard and brittle material such as ceramic and hard metal by the employment of this technique. However, in order to ensure the success of performances such as efficient machining, surface finish, and surface quality, it is important to sustain the insulating layer that has sharply exposed abrasives in wheel surface. Using AE(Acoustic Emission) sensor, this paper will show whether the insulating layer sustains stably or not in real grinding time. And by comparing AErms value and surface roughness their thresholds for stable electrolytic in-process dressing grinding will be determined.