• 산업식품공학
• /
• 제13권4호
• /
• pp.269-274
• /
• 2009

습식분쇄의 최적조건을 얻고자 부형제 종류, 농도, 습식 분쇄시 rotor speed, bead size, feed rate, 분쇄회수를 달리하여 분쇄한 결과, 부형제로는 gum arabic을 사용하여 5%의 농도로 첨가할 때 가장 좋은 분쇄효과를 나타내었다. Rotor speed를 달리하여 습식분쇄한 결과, rotor speed가 증가할수록 좋은 결과를 나타내어 4,000 rpm에서 가장 우수한 것으로 나타났다. 원료와 직접 부딪혀 분쇄를 하게 되는 bead는 0.4 mm의 크기를 사용하였을 때 가장 작은 사이즈로 분쇄되는 것으로 나타났다. 분쇄가 이루어지는 chamber내에 원료를 공급하는 비율에 따른 결과에서는 40 L/h 의 속도로 공급했을 때 가장 작은 입도분포를 보였다. 분쇄회수에 따른 영향은 횟수에 따라서는 8회 이상으로 분쇄하였을때 0.6 $\mu$m이하의 입도분포가 90% 이상으로 나타나 10회를 분쇄하였을때 가장 좋은 효과를 나타내었다. 연속운전과 비연속운전의 비교에서는 연속운전이 더 효율적이었으며 부형제 종류에 따른 영향은 gum arabic을 첨가하여 분쇄하였을때 가장 우수한 결과를 나타내었다. 따라서 적절한 농도와 종류의 부형제 사용과 rotor speed, bead size, feed rate, 용매와의 혼합비의 최적공정을 수립한 습식 분쇄기술로 초미세액상칼슘의 제조가 가능하였고, 습식분쇄기술을 식품가공기술로 활용할 수 있는 가능성을 확보하였다.

• 대한기계학회논문집A
• /
• 제21권8호
• /
• pp.1298-1310
• /
• 1997

In recent years, grinding techniques for precision machining of brittle materials used in electric, optical and magnetic parts have been improved by using superabrasive wheel and precision grinding machine. The completion of optimum dressing of superabrasive wheel makes possible the effective precision grinding of brittle materials. However, the present dressing system cannot have control of optimum dressing of the superabrasive wheel. In this study, a new system and the grinding mechanism of optimum in-process electrolytic dressing were proposed. This system can carry out optimum in-process dressing of superabrasive wheel, and give very effective control according to unstable current and gap increase. Therefore, the optimum in-process electrolytic dressing is a good method to obtain the efficiency and mirror-like grinding of brittle materials.

• 한국정밀공학회지
• /
• 제10권2호
• /
• pp.178-189
• /
• 1993

Engineering ceramics have some excellent properties as the material for the mechanical components. It is, however, very difficult to grind ceramics with high efficiency because of their high strength, hardness and brittleness. In this paper experiments are carried out to obtain the effect of "In-process dressing" to grind the Engineering ceramics with high efficiency. To save running time for dressing process and obtain restraint effect of diamond grain wear, "In-process dressing" system usint WA stick type honing stone is proposed. Representative High Strength Engineering ceramics A1$_{2}$O$_{3}$ and Si$_{3}$N$_{4}$are ground with diamond wheel. Also bending strengrh test is carried out to check upward tendancy of mecahnical properties as the result of machining defact restraint through the grinding maching method using "In-process dressing" process. Some results obtained in this study provide useful information to attain the high efficency grinding and the high mechanical properties of Engineering ceramics.rties of Engineering ceramics.

• 에너지공학
• /
• 제28권1호
• /
• pp.1-9
• /
• 2019

석탄 화력발전소의 배연탈황공정에서 탈황용 흡수제로 사용하는 석회석을 대상으로 본드의 분쇄일지수(BWI) 및 하드그로브지수(HGI) 측정 후 분쇄효율을 비교하였다. 측정결과, 국내 탈황용 석회석의 분쇄성지수는 HGI가 증가함에 따라 BWI가 감소하는 선형적인 반비례 관계를 확인할 수 있었으며, 석회석의 화학조성 및 채광위치에 따른 결정구조에 따라 분쇄효율의 차이가 발생하였다. 이에 따라, 석회석의 분쇄성을 측정할 경우 측정방법이 까다롭고 시간이 오래 걸리는 BWI 보다 간편하게 측정할 수 있는 HGI를 활용하여도 시료의 분쇄성 차이를 확인할 수 있을 것으로 사료되며, 분쇄 특성에 따른 석회석의 선택적 활용 시 탈황효율 또한 향상시킬 수 있을 것으로 판단된다.

• 한국산학기술학회논문지
• /
• 제20권6호
• /
• pp.126-133
• /
• 2019

본 연구는 분쇄효율 향상 및 시멘트의 품질 문제 해결 등 고품질의 시멘트를 제조하기 위하여 멜라민계 기능성 분쇄조제의 합성 및 이를 적용한 시멘트의 물리적 특성을 검토하였다. 시멘트 클링커의 분쇄 효율 및 제조된 시멘트의 물리적 특성을 향상시키기 위하여 멜라민계 공중합체를 methyolation, sulfonation 및 산촉매를 이용하여 polymerzation의 3단계로 나누어 반응을 진행하였다. 합성된 멜라민계 공중합체를 시멘트 클링커 분쇄 공정에 적용하여 기존의 분쇄효율을 향상시키기 위하여 사용되는 DEG(Diethylene glycol)와 압축강도를 향상시키기 위하여 사용되는 TIPA계(Triisopropanol amine) 분쇄조제와의 물리적 특성을 비교하였다. 연구결과 분쇄능의 경우 유기 고분자의 시멘트 입자로의 안정한 흡착으로 표면 에너지를 감소시킴에 따라 기존 DEG와 TIPA계 분쇄조제 대비 분말도는 4~6% 증진시키는 것으로 나타났으며, 압축강도는 기존 DEG 대비 초기 강도에 있어서는 약 30%, 28일 재령의 경우 약 13%이상의 강도 증진 효과가 확인됨에 따라 전체적인 품질은 기존 분쇄조제 대비 향상된 것으로 나타났다.

• 한국기계가공학회지
• /
• 제15권4호
• /
• pp.8-15
• /
• 2016

Most machines lose a lot of energy due to friction. Wear due to friction also reduces performance. Therefore, it is important to reduce friction on the surface to improve energy efficiency and decrease wear. Surface texturing refers to making patterns on the surface for reducing friction. There are many surface texturing methods, such as using lasers, abrasive jet machining, and so on. Recently, mechanical manufacturing methods, such as cutting and grinding, have been highlighted. Among them, the grinding method has the advantage of making patterns in large areas quickly. Therefore, it is appropriate for surface texturing on large machines. This paper is a study on the slope change of the surface texturing pattern using grinding. Therefore, we researched the slopes of the patterns corresponding to "spindle speed and feed rate" and "curvature of workpiece surface" using a mathematical model and experiment. As a result, we made a proper mathematical model concerning our research. Therefore, using the mathematical model in this paper, we could predict the slope change of the pattern according to grinding conditions.

• 생태와환경
• /
• 제41권4호
• /
• pp.485-489
• /
• 2008

Algal chlorophyll-$\alpha$ is commonly determined by spectro-photometric method using 90% acetone as solvents. However, acetone has low extraction efficiency without grinding filters, and DMF (dimethyl formamide) was tested for the compatibility with acetone. Chlorophyll-$\alpha$ concentration was determined for samples from 5 reservoirs of different trophic states and phytoplankton composition, using acetone extraction with grinding and DMF without grinding. Chlorophyll-$\alpha$ measured by DMF and Acetone did not show a significant difference when using trichromatic method of UNESCO and Lorenzen, and therefore, DMF can substitute acetone. But when acidification method was applied, they showed significant difference of 8%. It can be concluded that DMF can extract chlorophylls more effectively without grinding and it can be a better alternative for the standard extraction solvent.

• 한국세라믹학회지
• /
• 제46권1호
• /
• pp.102-107
• /
• 2009

This study has been focused on an effective surface finishing method combining ELID (ELectrolytic In-process Dressing) and MAP (Magnetic Assisted Polishing) for the nano-precision mirror grinding of glass-lens molding mould. ELID grinding is an excellent technique for mirror grinding of various advanced metallic or nonmetallic materials. A polishing process is also required for elimination of scratches present on ELID grinded surfaces. MAP has been used as polishing method due to its high polishing efficiency and superior surface quality. It also presents some techniques for achieving the nanometer roughness of the hard material such as WC-Co, which are extensively used in precision tooling material.

• 대한기계학회논문집A
• /
• 제22권3호
• /
• pp.545-553
• /
• 1998

Recently a new process known as the magnetic fluid grinding has been developed, which can remove material from the surface of ceramic balls by fifty to one hundred times more rapidly than the conventional lapping process. In this study, the ceramic balls with various compositions are made and ground by using the magnetic fluid grinding technique with various machining parameters. In order to make well-round shaped balls by using the magnetic fluid grinding technique, the fundamental research to find out the machining factors has been carried out. Developing an equipment with higher efficiency and reliability in the machining could certainly lead to the higher productivity with excellent quality of ceramic balls.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.576-581
• /
• 1993

Grinding in the cement industry is a very energy-exacting process, therefore it is essential that these systems should operate with the highest possible efficiency. But, Cement grinding process is a complicated nonlinear system with large dead time, very noisy signal and many stochastic disturbances. So, it is difficult to develope mathematic process model. This paper presents correlation analysis of process variables and construction of experimental model for a ball mill grinding process.