• Journal of Internet Computing and Services
• /
• v.7 no.6
• /
• pp.87-103
• /
• 2006

Advances in computer and network technology provide new computing environment that were only possible with supercomputers before. In order to provide the environment, a distributed runtime system has to be provided, but most of the conventional distributed runtime systems lack in providing dynamic and flexible system reconfiguration depending on workload variance, due to a static architecture of fixed master node and slave working nodes. This paper proposes and implements a new model for distributed job allocation and management which is a distributed runtime system is P2P environment for flexible and dynamic system reconfiguration. The implemented systems enables job program transfer and management, remote compile and execution among cooperative developers based on P2P standard protocol Jxta platform. Since it makes dynamic and flexible system reconfiguration possible, the proposed method has some advantages in that it can collect and utilize idle computing resources immediately at a needed time for distributed job processing. Moreover, the implemented system's effectiveness and performance increase are shown by applying and processing the crawler jobs, in a distributed way, for collecting a large amount of data needed for internet search.

• Atmosphere
• /
• v.30 no.3
• /
• pp.257-276
• /
• 2020

Faithful evaluation of the meteorological input is a prerequisite for a better understanding of air quality model performance. Despite the importance, the preliminary meteorological assessment has rarely been concerned. In this study, we aim to evaluate the performance of the Weather Research and Forecasting (WRF) model conducting a year-long high-resolution meteorological simulation in 2016 over the Seoul metropolitan area. The WRF model was configured based on a series of sensitivity simulations of initial/boundary meteorological conditions, land use mapping data, reanalysis grid nudging method, domain nesting method, and urban canopy model. The simulated results of winds, air temperature, and specific humidity in the atmospheric boundary layer (ABL) were evaluated following statistical evaluation guidance using the surface and upper meteorological measurements. The statistical evaluation results are presented. The model performance was interpreted acceptable for air quality modeling within the statistical criteria of complex conditions, showing consistent overestimation in wind speeds. Further statistical analysis showed that the meteorological model biases were highly systematic with systematic bias fractions (f_SB) of 20~50%. This study suggests that both the momentum exchange process of the surface layer and the ABL entrainment process should be investigated for further improvement of the model performance.

• Journal of Korean Society for Geospatial Information Science
• /
• v.20 no.3
• /
• pp.3-10
• /
• 2012

The investigation of valley networks and their volume provide important information about past water activities on Mars. As an alternative of conventional image processing methods, terrain filtering algorithm using pointcloud data is suggested in this study. First, the topography of pointcloud is inverted so that the valleys become positive features and the algorithm is then applied to distinguish the valleys from the surface. Ground DEM and object DEM are generated from both the valleys and the surface pointcloud then the volume of valleys is estimated by multiplying the height difference between the surface with valleys and the area of valleys based on grid cellsize. In the test of valleys adjacent to Tuscaloosa crater, the total volume of valleys was estimated to be $1.41{\times}10^{11}m^3$ with the difference of 12% and 16% compared with the infill volume of Tuscaloosa crater and BTH result respectively.

• Journal of Korean Society for Geospatial Information Science
• /
• v.18 no.4
• /
• pp.51-60
• /
• 2010

In 2008, the Development Impact Fee Zoning has been newly amended and added to the existing National Territory Planning Act. Since the beginning of 2009, many local governments nationwide started to adopt the law as a powerful tool to prepare the prescirbed masterplans for the installment of adequate infrastructure and to procure the financial resources to realize the plan. The study, in this context, tried to build gridded population data and analyzed the population cells that exceed the legal criteria of population increase rate required by the law over the case area of Sooyoung-Ri in Hwasung City. The study further probed to group the selected population cells in five specified increasing steps on which the alternative impact fee zones are built. Throughout the process, the study could properly set a reasonable impact fee zone and suggested a practical examples of the final zone specification applicable by the localities.

• Journal of Korea Society of Industrial Information Systems
• /
• v.9 no.1
• /
• pp.7-16
• /
• 2004

The tool path needs to be determined in an efficient manner to generate the final NC (numerical control) code for efficient machining. This is particularly important in machining free form pockets with an arbitrary wall geometry on a three-axis CNC machine. Many CAD/CAM systems use linear interpolation to generate NC tool paths for curved surfaces. However, this needs to be modified to improve the smoothness of the machined bottom surface, reduce machining time and CL (cutter location) file size. Curved machining can be a solution to reduce these problems. The unified rough and finish cut algerian and the tool motion is graphically simulated. In this paper, a grid based 3D navigation algorithm for generating NC tool path data for both linear interpolation and a combination of linear and circular interpolation for three-axis CNC milling of general pockets with sculptured bottom surfaces is developed.

• International Journal of Fluid Machinery and Systems
• /
• v.3 no.4
• /
• pp.315-323
• /
• 2010

This work investigates the influence of water compressibility on pressure pulsations induced by rotor-stator interaction (RSI) in hydraulic machinery, using the commercial CFD solver ANSYS-CFX. A pipe flow example with harmonic velocity excitation at the inlet plane is simulated using different grid densities and time step sizes. Results are compared with a validated code for hydraulic networks (SIMSEN). Subsequently, the solution procedure is applied to a simplified 2.5-dimensional pump-turbine configuration in prototype with different speeds of sound as well as in model scale with an adapted speed of sound. Pressure fluctuations are compared with numerical and experimental data based on prototype scale. The good agreement indicates that the scaling of acoustic effects with an adapted speed of sound works well. With respect to pressure fluctuation amplitudes along the centerline of runner channels, incompressible solutions exhibit a linear decrease while compressible solutions exhibit sinusoidal distributions with maximum values at half the channel length, coinciding with analytical solutions of one-dimensional acoustics. Furthermore, in compressible simulation the amplification of pressure fluctuations is observed from the inlet of stay vane channels to the spiral case wall. Finally, the procedure is applied to a three-dimensional pump configuration in model scale with adapted speed of sound. Normalized Pressure fluctuations are compared with results from prototype measurements. Compared to incompressible computations, compressible simulations provide similar pressure fluctuations in vaneless space, but pressure fluctuations in spiral case and penstock may be much higher.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.23 no.3
• /
• pp.248-257
• /
• 2011

In the present study, we proposed a new numerical wave tank model to analyze the vertical tension-leg circular floating bodies, using a 2-D Navier-Stokes solver. An IBM(Immersed Boundary Method) capable of handling interactions between waves and moving structures with complex geometry on a standard regular Cartesian grid system is coupled to the VOF(Volume of Fluid) method for tracking the free surface. Present numerical results for the motions of the floating body were compared with existing experimental data as well as numerical results based on FAVOR(Fractional Area Volume Obstacle Representation) algorithm. For detailed examinations of the present model, the additional hydraulic experiments for floating motions and free surface transformations were conducted. Further, the versatility of the proposed numerical model was verified via the numerical and physical experiments for the general rectangular floating bodies. Numerical results were compared with experiments and good agreement was archived.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.12
• /
• pp.1682-1688
• /
• 2017

In modern society, the number of industrial customers using equipment sensitive particularly to voltage sags is rapidly increasing. As voltage sags can cause loss of information as well as false operation of the control device, it results in the vast economic damage in industrial processes. One way to mitigate voltage sags in the sensitive loads is the installation of distributed generation (DGs) on the periphery of these loads. In addition, renewable energy sources are currently in the spot light as the potential solution for the energy crisis and environmental issues. In particular, wind power generation which is connected to a grid is rising rapidly because it is energy efficient and also economically feasible compared to other renewable energy sources. On the basis of the above information, in this paper, with Wind Turbine Generators (WTGs) installed nearby the sensitive load, the analysis of the mitigating effect comparison by types of WTGs is performed using voltage sag assessment on the IEEE-30 bus test system. That is, the areas of vulnerability according to types of WTGs are expected to be different by how much reactive power is produced or consumed as WTG reactive power capability is related to the types of WTGs. Using the concept of 'Vulnerable area' with the failure rate for buses and lines, the annual number of voltage sags at the sensitive load with the installation of WTGs per type is studied. This research will be anticipated to be useful data when determining the interconnection of wind power generation in the power system with the consideration of voltage sags.

• Journal of Korea Water Resources Association
• /
• v.36 no.1
• /
• pp.1-11
• /
• 2003

This paper describes a finite volume, two-dimensional model. It adopts a recently developed essentially non-oscillatory(ENO) schemes based on the Lax-Friedrichs solver, which was modified for a finite volume grid, and employs a modified MUSCL(Monotonic Upstream centered Scheme for Conservation Law) for second-order accuracy in space. To demonstrate the applications of the model, it is applied to solve the 1-D and 2-D dam-break problems. The model in conjunction with the modified MUSCL showed a better agreement with analytical solutions than the minmod function in 1-D dam-break problems and is satisfactorily validated with documented published data in 2-D dam-break problems. The model was applied to tidal wane entering channel at one end, and the results showed a good agreement with analytical solutions. In the channel with reflective boundary conditions specified at the extremities, the model was capable of accurately simulating the wave propagation.

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.4_2
• /
• pp.617-626
• /
• 2020

The drilling mud is essentially used in oil and gas development. There are several roles of using the drilling mud, such as cleaning the bottomhole, cooling and lubricating the drill bit and string, transporting the cuttings to the surface, keeping and adjusting the wellbore pressure, and preventing the collapse of the wellbore. The fragments from rocks and micro-sized bubbles generated by the high pressure are mixed in the drilling mud. The systems to separate those mixtures and to keep the uniformly maintained quality of drilling mud are required. In this study, the simulation is conducted to verify the performance of the mud tank's agitation capacity. The primary role of the mud tank is the mixing of mud at the surface with controlling the mud condition. The container type is chosen as a mud tank pursuing efficient transport and better management of equipment. The single- and two-phase simulations about the agitation in the mud tank are performed to analyze and identify the inner flow behavior. The convergence of results is obtained for the vertical- and axis-direction velocity vector fields based on the grid-dependency tests. The mixing time analysis depending on the multiphase flow conditions indicates that the utilization of a two-stepped impeller with a smaller size provides less time for mixing. This study's results are expected to be utilized as the preliminary data to develop the mixing and integrating equipment of the onshore drilling mud system.