• Journal of Power Electronics
• /
• 제16권1호
• /
• pp.297-309
• /
• 2016

Grid-connected inverters (GCIs) with an LCL output filter have the ability of attenuating high-frequency (HF) switching ripples. However, by using only grid-current control, the system is prone to resonances if it is not properly damped, and the current distortion is amplified significantly under highly distorted grid conditions. This paper proposes a synchronous reference frame equivalent proportional-integral (SRF-EPI) controller in the αβ stationary frame using the parallel virtual resistance-based active damping (PVR-AD) strategy for grid-interfaced distributed generation (DG) systems to suppress LCL resonance. Although both a proportional-resonant (PR) controller in the αβ stationary frame and a PI controller in the dq synchronous frame achieve zero steady-state error, the amplitude- and phase-frequency characteristics differ greatly from each other except for the reference tracking at the fundamental frequency. Therefore, an accurate SRF-EPI controller in the αβ stationary frame is established to achieve precise tracking accuracy. Moreover, the robustness, the harmonic rejection capability, and the influence of the control delay are investigated by the Nyquist stability criterion when the PVR-based AD method is adopted. Furthermore, grid voltage feed-forward and multiple PR controllers are integrated into the current loop to mitigate the current distortion introduced by the grid background distortion. In addition, the parameters design guidelines are presented to show the effectiveness of the proposed strategy. Finally, simulation and experimental results are provided to validate the feasibility of the proposed control approach.

• 한국항공우주학회지
• /
• 제30권6호
• /
• pp.78-83
• /
• 2002

고속 열차가 터널을 통과할 때 열차 주위와 터널 내부에 발생하는 비정상 유통장을 규명하기 위해서 향상된 겹침 격자기법과 Roe의 FDS를 사용한 축대칭 Euler Solver를 개발하였다. 혼합차원기법이라는 새로운 영역기법을 개발하여 열차와 터널의 상호작용을 해석하는데 적용하였으며, 이 기법은 공간 차원의 최소 가정을 통해서 수치 계산의 효율성을 극대화하는 것에 목적을 두고 있다. 향상된 겹침 격자기법에 개발된 혼합차원기법을 추가하면 완전한 축대칭 방법과 거의 동일한 수준의 수치 정확도를 얻을 수 있다. 혼합차원기법은 특히 긴 터널에서 열차와의 상호작용을 해석할 때 높은 수치적 이득을 얻을 수 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.35-37
• /
• 2007

Super resolution using stochastic approach which based on the Bayesian approach is to easy modeling for a priori knowledge. Generally, the Bayesian estimation is used when the posterior probability density function of the original image can be established. In this paper, we introduced the improved MAP algorithm based on Bayesian which is stochastic approach in spatial domain. And we presented the observation model between the HR images and LR images applied with MAP reconstruction method which is one of the major in the SR grid construction. Its test results, which are operation speed, chip size and output high resolution image Quality. are significantly improved.

• 산업경영시스템학회지
• /
• 제47권2호
• /
• pp.147-154
• /
• 2024

This study focuses on the path planning algorithm for large-scale autonomous delivery using drones and robots in urban environments. When generating delivery routes in urban environments, it is essential that avoid obstacles such as buildings, parking lots, or any other obstacles that could cause property damage. A commonly used method for obstacle avoidance is the grid-based A* algorithm. However, in large-scale urban environments, it is not feasible to set the resolution of the grid too high. If the grid cells are not sufficiently small during path planning, inefficient paths might be generated when avoiding obstacles, and smaller obstacles might be overlooked. To solve these issues, this study proposes a method that initially creates a low-resolution wide-area grid and then progressively reduces the grid cell size in areas containing registered obstacles to maintain real-time efficiency in generating paths. To implement this, obstacles in the operational area must first be registered on the map. When obstacle information is updated, the cells containing obstacles are processed as a primary subdivision, and cells closer to the obstacles are processed as a secondary subdivision. This approach is validated in a simulation environment and compared with the previous research according to the computing time and the path distance.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 추계학술대회논문집
• /
• pp.333-338
• /
• 2003

Nano-imprint lithography(NIL) is a polymer embossing technique, capable of transferring nano-scale patterns onto a thin film of thermoplastics such as polymethyl methacrylate(PMMA) using this parallel process. Feature size down 10 nm have been demonstrated. In NIL, the pattern is formed by displacing polymer material, which can be squeeze flow of a viscous liquid. Due to the size of the pattern, a thorough understood of the process through experiments may be very different. Therefore we nead to resort to numerical simulation on the embossing process. Generally, there are two ways of numerical simulation on nano-scale flow, namely top-down and bottom-up approach. Top-down approach is a way to simulate the flow assuming that polymer is a continuum. On the contrary, in the bottom-up approach, simulation is peformed using molecular dynamics(MD). However, as latter method is not feasible yet. we chose the top-down approach. For the numerical analysis, two dimensional moving grid was used since the moving grid can predict the flow front. Effects of surface tension as well as the slip at the boundary were also considered.

• 한국정보과학회논문지:정보통신
• /
• 제32권4호
• /
• pp.525-534
• /
• 2005

본 논문은 무선 센서 네트워크에 있어서 궤도 기반 매취메이킹 서비스를 위한 질의 이탈 및 이의 방지에 관한 것이다. 이러한 문제는 정보 구독 궤도를 따라 전파되는 질의가 정보 발간 궤도와 기하학적으로는 겹침에도 불구하고 정보를 획득하지 못할 때 발생한다 이에 따라 질의를 재 제출하거나 새로운 구독 궤도를 시작함으로 인한 시간 지연이 초래되어 최악에는, 궤도내의 루핑이나 네트워크 전체로의 메시지 범람을 야기한다. 이 문제를 정형적으로 다루고 그 해결책을 제시한다. 먼저, 노드들이 존재하는 영역을 논리적으로 작은 그리드들로 분할하고, 그리드 기반 멀티캐스트 다음-흡 선택 알고리즘을 제안한다. 제안 알고리즘은 궤도 설정을 직선형태로 유지하도록 시도함은 물론 수신 노드들의 분포 및 틈새 없는 그리드 단위의 멀티캐스트를 고려한다 이러한 알고리즘에 의거하여 정보 발간 및 구독을 시행하는 경우 질의 이탈이 궁극적으로 방지됨을 증명한다. 제안 알고리즘이 탐욕적 송출과 같은 비 그리드 기반 알고리즘과 GAE와 같은 고정 크기의 그리드 접근법 보다 이웃 노드들의 전력을 더 적게 소모함을 알 수 있다.

• 한국경영과학회지
• /
• 제18권1호
• /
• pp.127-138
• /
• 1993

The Production Switching Heuristic (PSH) develope dby Mellichamp and Love (1978) has been suggested as a more realistic, practical and intuitively appealing approach to aggregate production planning (APP). In this researh, PSH has been modified to present a more sophisticated open grid search procedure for solving the APP problem. The effectiveness of this approach has been demonstrated by determining a better near-optimala solution to the classic paint factory problem. The performance of the modified production switching heuristic is then compared in the context of the paint factory problem with results obtained by other prominent APP models including LDR, PPP, and PSH to conclude that the modified PSH offers a better minimum cost solution than the original PSH model.

• Journal of Electrical Engineering and Technology
• /
• 제13권2호
• /
• pp.659-668
• /
• 2018

This paper proposes an optimization approach of a grid-connected photovoltaic and wind hybrid energy system including energy storage considering voltage fluctuation in the electricity grid. A techno-economic analysis is carried out in order to minimize the size of hybrid system by considering the benefit-cost. Lithium-ion battery type is used for both managing the electricity selling to the grid and reducing voltage fluctuation. A new technique is developed to limit the voltage perturbation caused by the solar irradiance and the wind speed through determining the state-of-charge of battery for every hour of a day. Improved particle swarm optimization (PSO) methods, referred to as FC-VACPSO which combines Fast Convergence Particle Swarm Optimization (FCPSO) method and Variable Acceleration Coefficient Based Particle Swarm Optimization (VACPSO) method are used to solve the optimization problem. A comparative study has been performed between standard PSO method and PSO based methods to extract the best size with the benefit cost. A sensitivity analysis has been studied for different kinds and costs of batteries, by considering variable and constant state-ofcharge of battery. The simulations, performed under Matlab environment, yield good results using the FC-VACPSO method regarding the convergence and the benefit cost of the hybrid system.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
• /
• pp.115-118
• /
• 2004

Images with high resolution are desired and often required in many visual applications. When resolution can not be improved by replacing sensors, either because of cost or hardware physical limits, super resolution image reconstruction method is what can be resorted to. Super resolution image reconstruction method refers to image processing algorithms that produce high quality and high resolution images from a set of low quality and low resolution images. The method is proved to be useful in many practical cases where multiple frames of the same scene can be obtained, including satellite imaging, video surveillance, video enhancement and restoration, digital mosaicking, and medical imaging. The method can be either the frequency domain approach or the spatial domain approach. Much of the earlier works concentrated on the frequency domain formulation, but as more general degradation models were considered, later researches had been almost exclusively on spatial domain formulations. The method in spatial domains has three stages: i) motion estimate or image registration, ii) interpolation onto high resolution grid and iii) deblurring process. The super resolution grid construction in the second stage was discussed in this paper. We applied the Maximum A­Posteriori(MAP) reconstruction method that is one of the major methods in the super resolution grid construction. Based on this method, we reconstructed high resolution images from a set of low resolution images and compared the results with those from other known interpolation methods.

• 한국전산유체공학회지
• /
• 제20권2호
• /
• pp.103-108
• /
• 2015

Fluid-body interaction analysis of floating body with six degree-of-freedom motion is presented. In this study, three-dimensional incompressible Navier-Stokes equations are employed as a governing equation. The numerical method is based on a finite-volume approach on a cartesian grid together with a fractional-step method. To represent the body motion, the immersed boundary method for direct forcing is employed. In order to simulate the coupled six degree-of-freedom motion, Euler's equations based on rigid body dynamics are utilized. To represent the complex body shape, level-set based algorithm is utilized. In order to describe the free surface motion, the volume of fluid method utilizing the tangent of hyperbola for interface capturing scheme is employed. This study showed three different continuums(air, water and body) are simultaneously simulated by newly developed code. To demonstrate the applicability of the current approach, two different problems(dam-breaking with stationary obstacle and water entry) are simulated and all results are validated.