• 대한기계학회논문집A
• /
• 제27권4호
• /
• pp.479-484
• /
• 2003

In this paper, film thickness and temperature distribution are measured in EHL point contact at high slip ratios. Infrared temperature mapping with two band pass fillers. proposed by Ausherman (1976). is used to measure temperature distribution. And the optical interferornetric method with two filters (red and green filters) is used to measure film thickness. Result of experiment showed that temperature rising at film and ball surface occurred very dramatically in Dimple zone. As slip velocity, slip ratio and load increased, size of Dimple and temperature rising became more large In addition, Position and shape of Dimple we changed by slip ratios, and increasing of Dimple size decreased traction coefficient. In short, it is appointed that the Dimple phenomenon be developed by the effect of viscosity wedge.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.826-827
• /
• 2006

Copper infiltration is demonstrated as a viable solution to achieve higher mechanical properties by filling the interconnected porosities of a ferrous structure with copper infiltrant. This paper will present the results of a design of experiments study based on the selected processing variables in the copper infiltration process. The variables are the following: Infiltrating temperatures, infiltrating time at pre-heat zone and hot zone, the green density of iron part, the migration of copper into the iron part at different processing conditions. The results show the flexibility of the infiltration process to attain certain mechanical properties by changing the processing conditions.

• 한국세라믹학회지
• /
• 제35권6호
• /
• pp.569-574
• /
• 1998

자체의 반응열에 의해 반응이 자발적으로 진행되는 SHS법을 이용하여 $Ti_3AI$ 금속간 화합물의 생성반응에서의 화염대 두계, 반응속도 그리고 겉보기 활성화에너지에 대하여 고찰하였다. 이 반응에서 화염대 두께는 1.4mm이었고, 반응속도는 $0.4g/\textrm{cm}^2{\cdot}sec$이었다. 또한, 반응물의 상대밀도를 조절하여 얻은 실험 data를 이용하여 구한 반응의 겉보기 활성화에너지는 40kJ/mol이었다.

• 한국결정성장학회지
• /
• 제15권5호
• /
• pp.188-192
• /
• 2005

High $T_c(Y_{0.5}Nd_{0.25}Sm_{0.25})Ba_2Cu_3O_y[(YNS)-123]$ superconductors with/without $CeO_2$ additive were systematically investigated by the zone melt growth process in air. Cylindrical green rods of (YNS)-123 oxides were fabricated by cold isostatic pressing (CIP) method using rubber mould. A sample prepared by this method showed well-textured microstructure, and $(Y_{0.5}Nd_{0.25}Sm_{0.25})_2BaCuO_5[(YNS)211]$ nonsuperconducting inclusions were uniformly dispersed in large $(Y_{0.5}Nd_{0.25}Sm_{0.25})Ba_2Cu_3O_y$[(YNS)123] superconducting matrix. In this study, optimum melting temperature and growth rate were $1100^{\circ}C$ and 3 mm/hr, respectively. The directionally melt-textured (YNS)-123 sample with $CeO_2$ additive showed an onset critical temperature $(T_c)\;T_c{\geq}93K$ and sharp superconducting transition.

• Journal of the Korean Institute of Landscape Architecture International Edition
• /
• 제1호
• /
• pp.120-126
• /
• 2001

The Haidian Garden of Zhongguancun Science and Technology Zone is an area with high intellectual intensity. It is therefore known as China's Silicon Valley. The Summer Palace, a World Heritage Site, sits in the northwest part of it. 250 years ago, the construction of imperial gardens in this area, including the Summer Palace, gave birth to the appearance and prosperity of the town of Haidian. This will also provide various opportunities for the growth of the science and technology. Today the green space, the cultural and ecological environment of the Summer Palace, and its 3-kilometer buffer zone are becoming one important strategic factor for the Haidian Garden to attract talents, improve international competitiveness and realize sustainable development. How to taking advantage of the favorable resources, to achieve balance between protection of the environment around the Summer Palace and urban development, will be of great importance in the future plans of the science and technology.

• 한국환경생태학회지
• /
• 제22권6호
• /
• pp.691-706
• /
• 2008

본 연구에서는 해안 매립도시인 안산시 철도변 완충녹지를 대상으로 완충녹지의 문제점을 분석하고, 완충녹지의 공간기능과 식재개념에 적합한 식재방안을 제시하였다. 안산시 철도별 완충녹지의 식재밀도는 $0.04{\sim}0.17$주/$m^2$ 이었고, 녹지용적계수는 $0.15{\sim}1.65m^3/m^2$로 녹량이 부족하여 완충기능이 미흡하였다. 마운딩 완충녹지의 토양경도는 $2.72{\sim}15kg/cm^2$로 식생생육에 적합하지 않았다. 완충녹지의 기능을 향상시키기 위해 야생조류 서식 측면의 생물서식기능, 주변 토지이용 측면의 도시공원기능, 식재수종 계절성 측면의 경관개선기능을 검토하였다. 완충녹지를 기능에 따라 생물서식기능의 완충녹지, 완충 및 경관개선기능의 완충녹지, 경관 및 도시공원기능의 완충녹지, 완충 및 생물서식기능의 완충녹지로 재설정하였다. 완충기능 식재방안에서는 곰솔 등을 주요종으로 선정하고, 교목종 0.4주/$m^2$, 관목종 0.5주/$m^2$로 식재밀도를 설정하였고, 경관개선 기능에서는 느티나무, 산벚나무, 살구나무 등을 주요종으로 선정하고 교목종 0.2주/$m^2$, 관목종 0.5주/$m^2$로 식재밀도를 설정하였다. 생물서식기능에서는 상수리나무, 산벚나무, 팥배나무 등을 주요종으로 선정하고, 적정 식재 밀도를 교목종 0.06주/$m^2$, 아교목종 0.1주/$m^2$, 관목종 0.8주/$m^2$로 식재밀도를 제시하였다.

• ALGAE
• /
• 제22권4호
• /
• pp.305-311
• /
• 2007

The summer algal flora and community of 15 uninhabited islands in Dochodo, southwestern coast of Korea, were investigated from 9 June to 16 September 2007. A total 53 species (10 green, 14 brown and 29 red algae) of marine algae were identified. Among 15 uninhabited islands, the number of species observed was the highest as 33 species at Jeongdo and Gyeongchido the least as 24 species at Hugdo and Mido. The dominant species were Enteromorpha compressa, Ishige okamurae, Gloiopeltis furcata, Ulva pertusa and Sargassum thunbergii. The algal zonation of intertidal zone was figured out by Gloiopeltis furcata, Caulacanthus okamurae – Ulva pertusa, Sargassum thungergii – Gelidium amansii, Sargassum horneri from upper to lower zone. The flora investigated could be classified into six functional groups such as coarsely branched form (39.6%), filamentous form (25.8%), sheet form (14.1%), thick leathery form (9.9%), jointed calcarious form (5.6%) and crustose form algae (4.9%).

• 한국전기전자재료학회논문지
• /
• 제15권3호
• /
• pp.269-274
• /
• 2002

(Sm/Y)-Ba-Cu-O system high Tc composite superconductors with/without $CeO_2$ additive were directionally grown by zone-melting process, haying large temperature gradient, In air atmosphere. Cylindrical green rods of $({Sm/y})_{1.8}Ba_{2.4}Cu_{3.4}O_x$ [(Sm/Y)1.8] composite oxides by cold isostatic pressing(CIP) method using rubber mold were fabricated. The microstructure and superconducting properties were investigated by XRD, SEM, TEM and SQUID magnetometer. The size of nonsuperconducting $({Sm/y})_2BaCuO_5$ inclusions of the melt-textured (Sm/Y)1.8 sample with CeO$_2$ additive were remarkably reduced and uniformly distributed within the superconducting (Sm/Y)1.8 matrix. Both samples, with/without $CeO_2$ additive, showed an onset Tc $\geq$ 90 K and sharp superconducting transition. The critical current density Jc value of the $CeO_2$ addictive were $1{\times}10^5A/\textrm{cm}^2$ in 77 K, 0 Tesla.

• 교육녹색환경연구
• /
• 제8권2호
• /
• pp.40-50
• /
• 2009

The toilet in school building is one of most crucial elements for the recent changing face in school design, but the number of toilets and urinals in most school may not be sufficient to meet current needs, especially in the girl's toilet rooms. This study aims to suggest a guideline in designing the toilet in school buildings and propose the optimum area and development of models. The survey for this study is conducted through questionnaires collected and research from 9 schools in Seoul. The results of this study, it is suggested that the number of toilet facilities in school buildings be required by ratio of 0.5 toilets per a class and 1.1 urinal per a class for boy. In case of girls, it is suggested that ratio of 1.6 toilets per a class. Based on the result, it also propose various unit plans for each class block with space such as rest zone, green zone, powder zone etc.

• 한국전기전자재료학회논문지
• /
• 제29권2호
• /
• pp.110-113
• /
• 2016

(YNdSm)-Ba-Cu-O system high Tc composite superconductors were directionally grown by zone melting process, having large temperature gradient, in air atmosphere. Cylindrical green rods of $(YNdSm)_{1.8}Ba_{2.4}Cu_{3.4}O_x$ [(YNS)1.8]composite oxides by CIP (cold isostatic pressing) method using rubber mold were fabricated. The microstructure and superconducting properties were investigated by XRD, TEM and SQUID magnetometer. The size of nonsuperconducting $(YNdSm)_2BaCuO_5$ inclusions of the melt-textured (YNS)1.8 sample with $CeO_2$ additive were remarkably reduced and uniformly distributed within the superconducting (YNS)1.8 matrix. (YNS)1.8 samples, with / without $CeO_2$ additive, showed an onset $T_c{\geq}90K$ and sharp superconducting transition. The critical current density $J_c$ value of the (YNdSm)1.8 superconductor with $CeO_2$ additive were 840 A, $1.2{\times}104A/cm^2$ in 77 K, 0 Tesla by direct current transport method.