• Title/Summary/Keyword: Green wall

Search Result 307, Processing Time 0.027 seconds

Studies on the chlorella in Korea (한국 Chlorella에 대한 연구)

  • 이주식;심종호
    • Korean Journal of Microbiology
    • /
    • v.1 no.1
    • /
    • pp.38-44
    • /
    • 1963
  • According to the experiment on pure-isolation and the related contaminants of Chlorella, the phenomena of the ecological distributions of Chlorella in Korea have been manifested in several areas and also the aim that in going to do culture, biological and physiological study of Chlorella is carried out. Contaminants very oftenly occupied on the colony of the strains taken in order to fulfil pure-isolation of Chlorella, but in accordance with being piled up the minute research on this subject, I can obtain the desirable results as follows: 1. For the pure-isolation, the duration chose the time from May to September 1957 so that may easily isolate from contaminant water with utilizing the antibiotic substances. 2. To take long time, 36-48 hours until growth of nascent through the non-sporulated, it originates from the difference of the cultured media. In addition to the above mention, the mechanism of growth until nascent through the sporulated must not always require the ligh. However the supply of metabolic energy depend upon its nutritional conditions per phase. 3. The culture of Chlorella should be based on the lower culturing except adding especial conditions such as reagent concentration of media, artifical shake of media and other facts due to the natural conditions. And also these strains grew not only in distilled water but 2% NaCl solution without any abnormality in cell it self. I, therefore, guess it is possible to culture in sea-water under phasic environment. 4. In the experiment of ammonia detection, it is caused by the sampling surroundings to contain the minute quantity of ammonia in strain No. M 918; that is the place to be plenty of Carbohydrate on behalf of protein. 5. To compare the absorption curve of chlorophyll of higher plant with that of Chlorella, the absorption zone made mostly the Same ones each other but a little absorption grade dose not clearly appear. The colony which formed giant type grows with intensive colour and green band on surrounding of the colony and after that it was changed into all the green colour and developed up to end. 6. At first phase for a week, the development of Chlorella suspends the normal condition as in vivo but after a few days, the colour of chlorophyll gradually changed into blue-yellow which secrete the mucous substances on the agar media. The cell was flew out the contained substances itself on leaving the cell wall only, or the various micro-organism diffused on the outer-region of the cell.

  • PDF

The Study on the Landscape View Preferences on Slopes of Expressway (고속도로 비탈면 경관선호도에 대한 연구)

  • Park, Jae-Hyeon;Jeon, Gi-Seong;Kim, Kyung-Hoon
    • Journal of Korean Society of Forest Science
    • /
    • v.103 no.2
    • /
    • pp.226-232
    • /
    • 2014
  • This study was carried out to provide a basic information to improve the landscape view preference with internet questionnaire on slopes of an expressway. According to a questionnaire, the 37% of respondents used express way 5 times per one year. The 89% of respondents catched a glimpse of cutting slopes during driving and felt a good impression with flowers or vegetation in cutting slopes of expressways. The 61% of respondents felt a bad impression, but the 40% in a good impression from logos in cutting slopes of expressways. To improve a landscape view in cutting slopes of express ways, 57% of the respondents preferred natural-friendly techniques, followed by common green techniques (19%), greening of concrete construction (12%) and improvement of landscape views (11%). Landscape view preference before and after construction of green logo in cutting slopes of Seosejong IC was good (43%) and very good (16%), while bad (9%). The 65% of respondents support the installation of drawing or logos in terraced retaining wall of cutting slopes of expressways.

Evaluation of Physical Property and Material Characteristics for Stained Glass in the Yakhyeon Catholic Church, Korea (약현성당 스테인드글라스의 재료학적 특성과 물성평가)

  • Cho, Ji Hyun;Lee, Chan Hee;Kang, Myeong Kyu
    • Journal of Conservation Science
    • /
    • v.32 no.3
    • /
    • pp.425-436
    • /
    • 2016
  • The Yakhyeon catholic church (Historic Site No. 252 in Korea) that was constructed in 1892 has been the first western brick structure to ever have existed and one of the most important historical materials in the Korean modern architecture. After a fire had broken out at the catholic church in 1998, the stained glass on the back wall, the slab glass (dalle de verre) introduced by Lee Nam Guy in 1974, was repaired in 1999 because of singe scorch and water leakage. An analysis of the coloration elements showed that yellow, red and green included Zn, K and Cd, respectively. The glass of red contained Se, dark green contained Mn and Cr, and blue contained Pb and S. According to material analysis, the masonry joint was identified dolomite ($CaMg(CO_3)_2$) and calcite ($CaCO_3$), which was observed plate, columnar, rhombic and square of crystalline particles. Meanwhile, ultrasonic velocity in the stained glass recorded low speed in the middle and lower right of the window (an average of 4,130 m/s). And the joint was measured the lowest physical properties of the top left and middle of the window (an average of 2,053 m/s). This study have showed that extensive physical damage was founded to the left and middle rather than the right side. In this respect, more research in needed to conserve the correlation between color and physical properties.

Compositional Effect on the Magnetic Properties of Nd-Fe-Co-B and Nd-Fe-Co-Zr-B Bonded Magent (합금조성에 따른 Nd-Fe-Co-B 및 Nd-Fe-Co-Zr-B계 본드자석의 자기특성)

  • 최승덕;이우영;양충진
    • Journal of the Korean Magnetics Society
    • /
    • v.1 no.2
    • /
    • pp.60-68
    • /
    • 1991
  • In compacting the melt-spun $Nd_{14}Fe_{76}Co_{4}B_{6}$ and $Nd_{10.5}Fe_{79}Co_{2}Zr_{15}B_{7}$ magnetic powders. the difference in composition induces a different behavior of closed packing rate as a function of aspect ratio of the powders. The $Nd_{10.5}Fe_{79}Co_{2}Zr_{1.5}B_{7}$ alloy having a low Co/Fe ratio (low density) shows the better green density to have an enhanced closed packing rate. An empirical power equation relating the green density with the compacting pressure was obtained such as ${\phi}(g/cm^{2})=5.2~5.6{\times}P^{0.045~0.065}(ton/cm^{2})$. The $Nd_{14}Fe_{76}Co_{4}B_{6}$ alloy having a high Nd/Fe ratio possesses much finer grain size(50~60 nm) than that of $Nd_{10.5}Fe_{79}Co_{2}Zr_{1.5}B_{7}$ alloy and shows the higher coercivity($iH_{c}=14~15kOe$). The higher Nd/Fe ratio in the melt-spun Nd-Fe-Co-B alloy, where the domain wall pinning mechanism was found to be predominant, assists the formation of Nd-rich grain boundary phase acting as a pinning site. The grain boundary ranges over $12~16\;{\AA}$ thick in the Nd-Fe-Co-B alloy while it ranges over $8~12\;{\AA}$ thick in the Nd-Fe-Co-Zr-B alloy.

  • PDF

Sensitivity Analysis of Energy Efficient Refurbishment Strategies for Detached Houses in Three Climate Zones (지역별 단독주택 에너지 절감 리모델링 전략 민감도 분석)

  • Lee, Byungyun;CHEN, HAICHAO
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.21 no.9
    • /
    • pp.518-527
    • /
    • 2020
  • The establishment of a green remodeling strategy is focused on technology, so the necessity of establishing a customized strategy considering the field situation has emerged. This paper examined the technology strategy through sensitivity analysis as a methodology for guiding strategy. For a 90-square-meter detached house, nine models of the construction standards of pre-1980s, 1984, and 2010 in Seoul, Daejeon, and Busan were assessed using the optimization method that combines the energy plus engine and the ModeFrontier. Sensitivity analysis was performed, and the remodeling strategy priority was derived. For pre-1980 models, the strategy for enhancing the roof insulation performance had a significant priority. The SHGC values of the windows were found to have the next highest priority regardless of the region and the time of completion, showing that the performance standard, including the SHGC, needs to be expanded. The possibility of remodeling while maintaining the existing geometry was confirmed because the adjustment of the window wall ratio accompanying large-scale demolition works has low priority. The priorities of technology strategies in each case showed very different patterns, suggesting the possibility of establishing a remodeling strategy by a comprehensive evaluation along with economics and constructability analysis.

Development of Biotope area ratio Estimation Model using GIS (GIS를 활용한 생태면적률 산정 모델 개발)

  • Lee, Ji-Soo;Lee, Seung-Wook;Lee, Seung-Yeob;Hong, Won-Hwa
    • Spatial Information Research
    • /
    • v.19 no.2
    • /
    • pp.9-18
    • /
    • 2011
  • The purpose of this research is to evaluate an accurate biotope area ratio model with efficiency and convenience of database management through promoting sustainable development to provide people amenities in a new town. In particular, the biotope area ratio is used not only in the environment impact assessment but Green building certification criteria. But now there is no any index map of biotope. So it is very hard to implement with data for supplement results. In this research, we suggest the model of integrated attributable information. The evaluation of biotope area ratio is to include a basic land use planning map and a building coverage area which is a wall of greening surface and roof. In case of non building coverage area, the evaluation of biotope area ratio is to include water space, artificial ground, natural ground and pervious gap-pave. A weighted value on the spatial information is combined into the information. And then the merged one is given a land use planning information in a block. In the weighted value on the space type information, it is possible to in its circumstances. Therefore, it can be substituted a correspondence of numerical change for various values elastically in this model.

Horizontal-Axis Screw Turbine as a Micro Hydropower Energy Source: A Design Feasibility Study (마이크로 수력 에너지원의 수평축 스크류 터빈 : 설계 타당성 연구)

  • SHAMSUDDEEN, MOHAMED MURSHID;KIM, SEUNG-JUN;MA, SANG-BUM;KIM, JIN-HYUK
    • Journal of Hydrogen and New Energy
    • /
    • v.33 no.1
    • /
    • pp.95-104
    • /
    • 2022
  • Micro hydropower is a readily available renewable energy source that can be harvested utilizing hydrokinetic turbines from shallow water canals, irrigation and industrial channel flows, and run-off river stream flows. These sources generally have low head (<1 m) and low velocity which makes it difficult to harvest energy using conventional turbines. A horizontal-axis screw turbine was designed and numerically tested to extract power from such low-head water sources. The 3-bladed screw-type turbine is placed horizontally perpendicular to the incoming flow, partially submerged in a narrow water channel at no-head condition. The turbine hydraulic performances were studied using Computational Fluid Dynamics models. Turbine design parameters such as the shroud diameter, the hub-to-shroud ratios, and the submerged depths were obtained through a steady-state parametric study. The resulting turbine configuration was then tested by solving the unsteady multiphase free-surface equations mimicking an actual open channel flow scenario. The turbine performance in the shallow channel were studied for various Tip Speed Ratios (TSR). The highest power coefficient was obtained at a TSR of 0.3. The turbine was then scaled-up to test its performance on a real site condition at a head of 0.3 m. The highest power coefficient obtained was 0.18. Several losses were observed in the 3-bladed turbine design and to minimize losses, the number of blades were increased to five. The power coefficient improved by 236% for a 5-bladed screw turbine. The fluid losses were minimized by increasing the blade surface area submerged in water. The turbine performance was increased by 74.4% after dipping the turbine to a bottom wall clearance of 30 cm from 60 cm. The final output of the novel horizontal-axis screw turbine showed a 2.83 kW power output at a power coefficient of 0.63. The turbine is expected to produce 18,744 kWh/year of electricity. The design feasibility test of the turbine showed promising results to harvest energy from small hydropower sources.

A Research on the Creation of Floral Art Works as Public Installation : The Case of a Vertical Mini-Garden in Island Type Bus Stop (공공설치용 화예작품 창작에 관한 연구 -도심 중앙차로 버스정류장의 수직형 미니정원을 중심으로-)

  • Bae, Myung Hwa;Yoo, Teak Sang
    • Journal of the Korean Society of Floral Art and Design
    • /
    • no.41
    • /
    • pp.133-153
    • /
    • 2019
  • This study is about the development and creation of the public installation to enhance the contact chances with plants for the city dwellers who are living in the environment of limited green space. The researcher tried to create a floral art work at an island type bus stop on the central bus only lane, where the passers-by can enjoy the contact with plants for a second on that crowded space. The researcher made the study of various related cased world-widely and existing island type bus stop on the central bus only lane. The researcher also made pre-creation study of applicable forms and elements, and developed the prototype of the installation on the base of that study. Therefore the researcher created 1 installable screen type floral art work offering abundant contact experience to the viewers which has multiple shelves in the vertical frame to fit and be substituted by the designated wall unit of the island type bus stop structure. Also the researcher developed the prototypes of 2 small interior pieces. The meaning of this study can be found in the contribution of increasing visual experiencing rate of green space and chances of experiencing plants to create positive psychological, emotional effects by developing floral art works to be installed at crowded urban public space.

A Basic Study on the Selection of Plants for the Walls of Fortresses in the Case of the Jeongyi Town Wall in Jeju (제주 정의읍성 벽면식생에 근거한 벽면식재용 식물 선정에 관한 기초연구)

  • Rho, Jae-Hyun;Oh, Hyun-Kyung;Choi, Yung-Hyun;Kim, Yung-Suk
    • Journal of the Korean Institute of Landscape Architecture
    • /
    • v.42 no.2
    • /
    • pp.33-40
    • /
    • 2014
  • The purpose of this study is to examine vegetation of the outer walls of the Jeongyi Town Wall in Jeju and analyze the characteristics and problems identified, for suggesting preliminary data for selecting species of plants appropriate for the greening of the walls in the southern temperate climate region, including Jeju. The result of this study is as follows. The number of plants growing naturally around the walls of the town was identified to be 52 taxa. Based on the list of naturalized plants, there are 5 taxa; Sonchus oleraceus, Houttuynia cordata, Crassocephalum crepidioides, Erigeron annuus and Lamium purpureum. The number of species by district was from 3 to 14 taxa with 7.1 taxa on average. Analyzing by the constancy class, plants in class III included Sedum bulbiferum, Trichosanthes kirilowii, Hedera rhombea and Boehmeria nivea. Manipulation of the species composition table shows that the number of plant species growing naturally around the walls of Jeongyi Town Wall is a total of 52 taxa, including 11 taxa by differential species of community and 41 taxa by companion species. The types of plants very useful for the covering of the walls are evergreen climbing vine, such as Hedera rhombea, Ficus thunbergii and Euonymus fortunei and deciduous climbing vine, such as Parthenocissus tricuspidata, Trichosanthes kirilowii and Paederia scandens. In addition, Ficus stipulata is identified as a vegetation more appropriate for the southern-ward lattice-blocked walls. Woody plants, such as Akebia quinata, Celastrus flagellaris, Ampelopsis brevipedunculata for. citrulloides, Rubus hirsutus, Clematis apiifolia and herbaceous plants, such as Dioscorea tenuipes, D. quinqueloba, D. nipponica, Cayatia japonica and Paederia scandens var. angustifolia are highly useful materials for climbing plants for covering the walls of the southern province. Pteridophyte, such as Lemmaphyllum microphyllum, Pteris multifida, Cyrtomium falcatum and Lygodium japonicumare suggested as very useful for increasing unique regional characteristics of the southern province, including Jeju.

Cold Tolerance of Ground Cover Plants for Use as Green Roofs and Walls (옥상 및 벽면녹화용 지피식물의 내한성 비교)

  • Ryu, Ju Hyun;Lee, Hyo Beom;Kim, Cheol Min;Jung, Hyun Hwan;Kim, Ki Sun
    • Horticultural Science & Technology
    • /
    • v.32 no.5
    • /
    • pp.590-599
    • /
    • 2014
  • This study was conducted to compare the cold tolerance of seven ground cover species, Orostachys japonica, Sedum oryzifolium, S. kamtschaticum 'SG1', S. reflexum, S. rupestre 'Blue Spruce', S. spurium 'Green Mental', and S. takesimense, which have been used for green roof and wall systems in Korea. Plants were grown in 10-cm pots and 1 g of tissues at stem-end and crown of each species were kept under either light or dark condition, respectively. For cold tolerance tests, plants were initially left at $4^{\circ}C$ and linearly cooled to 0, -4, -8, -12, -16, and $-20^{\circ}C$ at $-2^{\circ}C{\cdot}h^{-1}$ rate. Low temperature injury and regrowth rates were visually evaluated and assessed by image analysis, respectively. The lethal temperature ($LT_{50}$) of plant species was determined using electrolyte leakage measurements. S. reflexum was the most cold tolerant, showing the most survival at $-16^{\circ}C$, whereas S. oryzifolium and S. takesimense showed low temperature injury at $-8^{\circ}C$. Similar results were found with electrolyte leakage measurements at the stem end. For each species, the crown (Mean $LT_{50}:\;-12.15^{\circ}C$) was more cold tolerant than the stem end (Mean $LT_{50}:\;-10.47^{\circ}C$). In conclusion, S. reflexum and S. rupestre 'Blue Spruce' are recommended for planting in the central region of Korea during late fall and early winter, as they were more cold tolerant and showed more vigorous regrowth than the other tested plant species.