• 농업과학연구
• /
• 제39권1호
• /
• pp.75-79
• /
• 2012

To increase antioxidative activity and minimize off-flavor of Chungkukjang, Seoliate as main ingredient and green tea as minor ingredient were selected. The protective efffect of green tea for Chungkukjang was evaluated under in vitro. Seolitae Chungkukjang added with green tea (SCG) was prepared on the basis of the protective effect of green tea from oxidative stress. Green tea showed the strong protective effect against nitric oxide (NO) and superoxide anion ($O_2{^-}$) radicals. The SCG perparation method was as follows. Seolitae was cleaned and washed, soaked in 1.5-fold water ($15^{\circ}C$) of Seolitae weight for 48 hr. Seolitae was steamed about 40 min by autoclave and then cooled about $40^{\circ}C$. Bacillus subtilis was inoculated and 5.0-fold green tea of weight was added, and then it was fermented for 60 hr at $40^{\circ}C$. According to the preparation method, Seolitae Chungkukjang (SC) and Seolitae Chungkukjang added with green tea 5.0% (SCG5.0) were prepared. Among the Chungkukjang groups SCG5.0 exerted more effective scavenging activity of NO than SC. In addition, SC added with green tea 5.0% showed high $O_2{^-}$ scavenging effect. These results suggest the antioxidative potential against free radical-induced oxidative damage of SCG.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 춘계 학술논문 발표대회
• /
• pp.10-11
• /
• 2013

Green Frame is a column-beam system formed by composite precast concrete column and beam connected with steel buried in both members. During the installation of Green columns, the columns of Green Frame, covering 3 floors per each piece and beams, the eccentricity can be observed due to the construction error and the weight of beam itself. Such eccentricity may have a little influence on a single frame, yet, it can develop critical issues to the installation of subsequent beams or beams on the upper floors in the context of a building as a whole that has multiple frames. These issues lead to delay in frame installation, decrease of productivity and increase of cost, etc. Therefore, this study presents a steel-joint connection method in order to solve the issues. The steel-joint connection method exists on slope plane and reinforcing plate in steel frame buried in composite PC members. Through this method, the issues can be resolved without requiring additional equipment or manpower.

• 한국전자파학회논문지
• /
• 제16권4호
• /
• pp.418-426
• /
• 2005

본 논문에저는 MoM 행렬 요소의 해석적 계산이 가능한 새로운 형태의 closed-form 그린함수 유도를 위한 최적의 근사화 경로 선택을 3-단계 근사화 방법 및 SDP(Steepest Descent Path) 방법을 고려하여 제시하였다. 본 논문의 방법으로 유도된 새로운 형태의 closed-form그린함수 계산 결과가 기존의 방법과 달리 파수 영역 그린함수의 사전조사 없이도 넓은 주파수 범위에서 보다 정확한 결과를 주고 있음을 알 수 있었다. 본 논문이 제안하는 방법의 타당성을 확인하기 위하여 몇 가지 수치 결과들을 제시하였다.

• Steel and Composite Structures
• /
• 제30권1호
• /
• pp.57-67
• /
• 2019

This paper deals with the static analysis of axially functionally graded rectangular plates. It is assumed that the flexural rigidity of the plate varies exponentially along one of the plate's in-plane dimensions. Both an analytical approach and a numerical method are utilized to solve the problem. The analytical solution is obtained by using the Green's function method. To employ this approach, the adjoint boundary value problem is established. Then, exact solutions for deflection of the plate for different boundary conditions are found. In another way, a finite element formulation for the problem is developed. In order to demonstrate the validity of the Authors' formulation, the results obtained via both mentioned schemes are compared with each other for functionally graded plates and with results of previously published works for homogeneous plates. The effect of plate parameters on the response of the plate is also investigated. To remind the research background, a brief review on the application of Green's function method in plates' analysis and functionally graded plates is also presented.

• 분석과학
• /
• 제35권4호
• /
• pp.153-160
• /
• 2022

A green spectrophotometric method for the determination of cyanide has been proposed using, a green reagent, aqueous extract of blue butterfly pea. The test tube was filled with anthocyanin rich extract (pH 6) and cyanide solution. The reaction was kept constant for 10 minutes at room temperature. The reaction mixture changed color from blue to green as the amount of CN-ions increased. The 620 nm peak intensity increased with CN concentration. Therefore, this wavelength was used for all cyanide analyses. The cyanide calibration curve had a linear range of 0.25-1.00, 1.00-4.00, and 4.00-10.00 mg/L, with a satisfactory correlation coefficient of 0.99 and a LOD of 0.57 mg/L. The recovery ranged from 8.33 to 76.94 percent, indicating that this method is inaccurate at low cyanide concentrations. The intra-day and intermediate precision relative deviations were 0.391-0.871 % and 1.112-1.583 %. An H-bond forms between the C-4 group of the B-carbonyl ring and the HCN molecule according to the B3LYP/TZVP calculation. The method is convenient for cyanide concentrations above the LOQ of 1.09 mg/L, cost-effective, and capable of reducing toxic solvents with acceptable precision. The method could also be used to detect total cyanide in biological, environmental, and industrial waste samples.

• 한국지진공학회논문집
• /
• 제24권2호
• /
• pp.59-65
• /
• 2020

The empirical Green's function method is applied to the foreshock and the mainshock of the 2016 Gyeongju earthquake to simulate strong ground motions of the mainshock and scenario earthquake at seismic stations of seven metropolises in South Korea, respectively. To identify the applicability of the method in advance, the mainshock is simulated, assuming the foreshock as the empirical Green's function. As a result of the simulation, the overall shape, the amplitude of PGA, and the duration and response spectra of the simulated seismic waveforms are similar with those of the observed seismic waveforms. Based on this result, a scenario earthquake on the causative fault of Gyeongju earthquake with a moment magnitude 6.5 is simulated, assuming that the mainshock serves as the empirical Green's function. As a result, the amplitude of PGA and the duration of simulated seismic waveforms are significantly increased and extended, and the spectral amplitude of the low frequency band is relatively increased compared with that of the high frequency band. If the empirical Green's function method is applied to several recent well-recorded moderate earthquakes, the simulated seismic waveforms can be used as not only input data for developing ground motion prediction equations, but also input data for creating the design response spectra of major facilities in South Korea.

• Korean Chemical Engineering Research
• /
• 제49권2호
• /
• pp.151-154
• /
• 2011

수열 합성법과 마이크로파 가열법으로 제조한 TS-1의 촉매 성능 평가를 과산화수소수를 이용한 페놀 수산화 반응 에서 수행하였는데 아세톤과 메탄올 및 물의 세 가지 용매를 사용하여 각 용매에서의 페놀 전환율과 생성물의 선택도 변화를 관찰하였다. 수열 합성법으로 제조한 TS-1과 마이크로파 가열법으로 합성한 TS-1의 XRD, EDS, SEM, BET 흡착/탈착 시험을 통해 촉매의 특성을 비교.분석하였고 마이크로파 가열법으로 합성한 TS-1이 수열 합성으로 제조한 TS-1과 상이한 페놀 전환율과 생성물의 선택도를 보이는 이유에 대해서 설명하였다.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2001년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall 2001
• /
• pp.19-27
• /
• 2001

Seismic parameters fur computation of ground motions in Southern Korea are obtained from recently recorded data, and site-independent regional and site-dependent local strong ground motions are predicted using efficient computational techniques. For the computation of ground motions, we devised an efficient procedure to compute site-independent $x_{q}$ and dependent $x_{s}$ values separately. The first step of this procedure is to use the coda normalization method far computation of site independent Q or corresponding $x_{q}$ value. The next step is the computation of $x_{s}$, values fur each site separately using the given $x_{q}$ value. For computation of ground motions the empirical Green's function (EGF) is modified to account fur the depth and distance variations of subevents on a finite fault plane using the theoritical Green's function. It is computed using wavenumber integration technique in layered media. The site dependent ground motions at seismic stations in southeastern local area were properly simulated using the modified empirical Green's function method in layered medium. The proposed method and procedures fur estimation of site dependent seismic parameters and ground motions could be efficiently used in the low and moderate seismicity regions.ons.s.ons.

• 대한조선학회논문집
• /
• 제50권5호
• /
• pp.273-281
• /
• 2013

In this paper, the effects of bow deck shape on the green water are studied by numerical and experimental method. Varying the deck shapes to triangular, elliptic and circular, the thickness and advancing velocity of green water leading edge are compared using numerical method. Also the motion, the pressure on the vertical wall and the height on the deck of green water are compared among the three bow deck shapes in the heave and pitch motion free condition by experimental method. To remove the effects of the difference of motions among the deck shapes, numerical simulations are performed varying the deck shape with the same motion. In the same motion condition, smallest impulsive pressure occurred in the condition of elliptic deck shape.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.133-134
• /
• 2006

In this paper, a novel method is presented for efficient calculation of the spatial-domain Green's functions of 2D electromagnetic problems. This method combines spectral and spatial domain calculation schemes and prevents the Green's functions from diverging at the singularities that complicate the process of the Method of Moment(MoM) application. For the validation of this proposed method, fields will be evaluated along the spatial distance including zero distance for 2D free-space and periodic homogeneous geometry. The numerical results show the validity of the prosed method and correspondng physics.