• 한국전기전자재료학회논문지
• /
• 제22권3호
• /
• pp.230-234
• /
• 2009

Hydrogen and Oxygen plasma treatments have been done on sonochemical grow ZnO nanorods by varying treatment temperature and time, The changes(position and intensity) in ultraviolet(UV) peaks and green peaks of photoluminescence(PL) spectroscopy have been measured, Experimental results showed; i) in the case of hydrogen plasma treatment, the blue shift of UV peak and the increase of PL intensity of the UV peak were observed as the increase of the process time and temperature, ii) in the case of oxygen plasma treatment, the red shift of green peak was observed and the ratio of $I_{Green}/I_{UV}$ was also increased, as the increase of the process time and the temperature.

• Advances in nano research
• /
• 제10권3호
• /
• pp.253-261
• /
• 2021

Polydimethylsiloxane (PDMS) is one of the most widely adopted silicon-based organic polymeric elastomers. Elastomeric nanostructures are normally required to accomplish an explicit mechanical role and correspondingly their mechanical properties are crucial to affect device and material performance. Despite its wide application, the mechanical properties of PDMS are yet fully understood. In particular, the time dependent mechanical response of PDMS has not been fully elucidated. Here, utilizing state-of-the-art PeakForce Quantitative Nanomechanical Mapping (PFQNM) together with Force Volume (FV) and Fast Force Volume (FFV), the elastic moduli of PDMS samples were assessed in a time-dependent fashion. Specifically, the acquisition frequency was discretely changed four orders of magnitude from 0.1 Hz up to 2 kHz. Careful calibrations were done. Force data were fitted with a linearized DMT contact mechanics model considering surface adhesion force. Increased Young's modulus was discovered with increasing acquisition frequency. It was measured 878 ± 274 kPa at 0.1 Hz and increased to 4586 ± 758 kPa at 2 kHz. The robust local probing of mechanical measurement as well as unprecedented high-resolution topography imaging open new avenues for quantitative nanomechanical mapping of soft polymers, and can be extended to soft biological systems.

• 인간식물환경학회지
• /
• 제24권4호
• /
• pp.441-450
• /
• 2021

Background and objective: The purpose of study is to analyze the three-dimensional (3D) structure by creating a 3D model for green spaces in a park using unmanned aerial vehicle (UAV) images. Methods: After producing a digital surface model (DSM) and a digital terrain model (DTM) using UAV images taken in Mureung Park in Chuncheon-si, we generated a digital tree height model (DHM). In addition, we used the mean shift algorithm to test the classification accuracy, and obtain accurate tree height and volume measures through field survey. Results: Most of the tree species planted in Mureung Park were Pinus koraiensis, followed by Pinus densiflora, and Zelkova serrata, and most of the shrubs planted were Rhododendron yedoense, followed by Buxus microphylla, and Spiraea prunifolia. The average height of trees measured at the site was 7.8 m, and the average height estimated by the model was 7.5 m, showing a difference of about 0.3 m. As a result of the t-test, there was no significant difference between height values of the field survey data and the model. The estimated green coverage and volume of the study site using the UAV were 5,019 m² and 14,897 m³, respectively, and the green coverage and volume measured through the field survey were 6,339 m² and 17,167 m³. It was analyzed that the green coverage showed a difference of about 21% and the volume showed a difference of about 13%. Conclusion: The UAV equipped with RTK (Real-Time Kinematic) and GNSS (Global Navigation Satellite System) modules used in this study could collect information on tree height, green coverage, and volume with relatively high accuracy within a short period of time. This could serve as an alternative to overcome the limitations of time and cost in previous field surveys using remote sensing techniques.

• 한국작물학회지
• /
• 제45권2호
• /
• pp.93-96
• /
• 2000

The present study was performed to obtain the basic information about growth and quality related characteristics and optimum harvesting time for podedible pea which is a new crop in Korea but believed to have a great deal of potentials for both domestic and overseas markets. They can be consumed either as a fresh succulent vegetable or as tender green pods. The daily green pod yield of pod-edible peas started to increase from ten days after flowering and the maximum yield was recorded on 26 days after flowering. Ninety percent of pod yields could be harvested from 16 to 36 days after flowering. Mean green pod yield for the tested varieties was approximately 8.0 t/ha. Total vitamin C content of pod-edible peas showed continuously decreasing trends from five days after flowering. The highest sucrose content was obtained at ten days after flowering. The highest panel score based on sweetness, chewiness, and hardness for the processed green pods was shown at 10-15 days after flowering in all varieties tested, indicating that the optimum harvesting time for pod-edible peas was considered to be 10-15 days after flowering.

• Environmental Engineering Research
• /
• 제14권1호
• /
• pp.63-67
• /
• 2009

Escherichia coli K-12 (E. coli K-12) is a representative indicator globally used for distinguishing and monitoring dynamic fates of pathogenic microorganisms in the environment. This study investigated how to most critically quantify lacZ ($\beta$-galactosidase) gene in E. coli K-12 by two different real-time polymerase chain reaction (real-time PCR) in association with three different DNA extraction practices. Three DNA extractions, i.e., sodium dodecyl sulfate (SDS)/proteinase K, magnetic beads and guanidium thiocyanate (GTC)/silica matrix were each compared for extracting total genomic DNA from E. coli K-12. Among them, GTC/silica matrix and magnetic beads beating similarly worked out to have the highest (22-23 ng/${\mu}L$) concentration of DNA extracted, but employing SDS/proteinase K had the lowest (10 ng/${\mu}L$) concentration of DNA retrieved. There were no significant differences in the quantification of the copy numbers of lacZ gene between SYBR Green I qPCR and QProbe-qPCR. However, SYBR Green I qPCR obtained somewhat higher copy number as $1{\times}10^8$ copies. It was decided that GTC/silica matrix extraction or magnetic beads beating in combination with SYBR Green I qPCR can be preferably applied for more effectively quantifying specific gene from a pure culture of microorganism.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1658-1660
• /
• 2007

We fabricate green device having unique life time characteristics of operating voltage reduction with time, ${\Delta}V_{op}$ <0. A green device needs lower voltage than initial voltage for sustaining constant current as life time goes on. It means there are two possible reasons; one is interface modification between anode and HIL due to oxygen plasma treatment and the other is bulk property modification due to combination of new green host and new green dopant. From these materials and oxygen plasma treatment, we can make white OLED device having the characteristics of low ${\Delta}V_{op}$ increasing.

• 한국축산식품학회지
• /
• 제35권3호
• /
• pp.382-388
• /
• 2015

A duplex real-time polymerase chain reaction (PCR) based assay for the detection of porcine and horse meat in sausages was designed by using EvaGreen fluorescent dye. Primers were selected from mitochondrial 12S rRNA and 16S rRNA genes which are powerful regions for identification of horse and porcine meat. DNA from reference samples and industrial products was successfully extracted using the GIDAGEN® Multi-Fast DNA Isolation Kit. Genomes were identified based on their specific melting peaks (Mp) which are 82.5℃ and 78℃ for horse and porcine, respectively. The assay used in this study allowed the detection of as little as 0.0001% level of horse meat and 0.001% level of porcine meat in the experimental admixtures. These findings indicate that EvaGreen based duplex realtime PCR is a potentially sensitive, reliable, rapid and accurate assay for the detection of meat species adulterated with porcine and horse meats.

• 한국약용작물학회지
• /
• 제16권6호
• /
• pp.421-426
• /
• 2008

Three year-old peony (Paeonia. lactiflora Pall. cv. Taebaek) was cultivated in green-house at Jan. 15, Feb. 15, or Mar. 15, respectively. The mean of temperature during the forcing cultivation was higher (air; $1.0{\sim}11.1^{\circ}C$, soil; $1.1{\sim}7.4^{\circ}C$) than that of open-field condition. From sprouting to flowering in peony cultivated at Jan. 15 was about 54 days, which is shorted the cut flower periods (ca. 26 days) compared with the open-field cultivation. However, earlier forcing cultivars were very susceptible to pathogens such as powdery mildew or gray mold. The yield in green house was also lower than in the open-field cultivation. The content of bioactive compounds such as paeoniflorin and albiflorin in green-house cultivars was similar that of open-field cultivars. These results showed the forcing cultivation time of peony at Feb. 15 in green-house was most desirable for commercialization.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.414-415
• /
• 2006

At present, Characteristic of high color reproduction for LCD products needed in Display market. Therefore, The improving methods of high color reproduction are alteration of color Filter or Red, Green, Blue phosphor alteration of CCFL. But High color reproduction phosphor is short life time as compared with conventional phosphor. In this experiment, by using split the Red, Green, Blue CCFL with high color reproduction phosphor instead of conventional high color reproduction CCFL. We knew that the high color reproduction RGB split CCFL BLU has same spectrum data and chromaticity, but has long life time as manufacturing RGB split CCFL and reduce chromaticity shift following long time discharge as compared with conventional high color reproduction CCFL.

• 농업과학연구
• /
• 제46권3호
• /
• pp.629-636
• /
• 2019

This study was conducted to investigate the growth characteristics and yield of whole green rice grains during the ripening period. These were investigated using Hopumbyeo and Unkwangbyeo at two transplanting times and with two kinds of nitrogen fertilization. The transplanting times were May 30 and June 20, respectively, using 30-day seedling culture and transplanting conducted with 3 - 4 plants per hill in planting space of $15cm{\times}30cm$. During nitrogen fertilization, 9 kg and 18 kg was used, respectively. The harvest of the green whole rice grains was carried out on the 15th, 20th, 25th, 30th, and 40th day after the heading date. The clum length was greater with later planting and with application of more nitrogen. The rice yield was higher with nitrogen fertilization of 18 kg/10 a when transplanted on May 30 for Hupumbyeo, and for Unkwangbyeo, was higher at 9 kg/10 a nitrogen fertilization when transplanted on May 30. The protein content of Hopumbyeo was higher when the nitrogen fertilizer was 18 kg/10 a, and that of Unkwangbyeo was lower than that when transplanting on June 20. The greenness was not related to the nitrogen fertilization level when transplanted on May 20 but for later transplanting, the greenness was higher when the nitrogen application was increased, and the greenness was the greatest about 30 days after the heading date.