Browse > Article
http://dx.doi.org/10.12989/anr.2021.10.3.253

Nanoscale quantitative mechanical mapping of poly dimethylsiloxane in a time dependent fashion  

Zhang, Shuting (Collaborative Innovation Center of Henan Province for Green Manufacturing of Fine Chemicals, Key Laboratory of Green Chemical Media and Reactions, Ministry of Education, School of Chemistry and Chemical Engineering, Henan Normal University)
Ji, Yu (Collaborative Innovation Center of Henan Province for Green Manufacturing of Fine Chemicals, Key Laboratory of Green Chemical Media and Reactions, Ministry of Education, School of Chemistry and Chemical Engineering, Henan Normal University)
Ma, Chunhua (Collaborative Innovation Center of Henan Province for Green Manufacturing of Fine Chemicals, Key Laboratory of Green Chemical Media and Reactions, Ministry of Education, School of Chemistry and Chemical Engineering, Henan Normal University)
Publication Information
Advances in nano research / v.10, no.3, 2021 , pp. 253-261 More about this Journal
Abstract
Polydimethylsiloxane (PDMS) is one of the most widely adopted silicon-based organic polymeric elastomers. Elastomeric nanostructures are normally required to accomplish an explicit mechanical role and correspondingly their mechanical properties are crucial to affect device and material performance. Despite its wide application, the mechanical properties of PDMS are yet fully understood. In particular, the time dependent mechanical response of PDMS has not been fully elucidated. Here, utilizing state-of-the-art PeakForce Quantitative Nanomechanical Mapping (PFQNM) together with Force Volume (FV) and Fast Force Volume (FFV), the elastic moduli of PDMS samples were assessed in a time-dependent fashion. Specifically, the acquisition frequency was discretely changed four orders of magnitude from 0.1 Hz up to 2 kHz. Careful calibrations were done. Force data were fitted with a linearized DMT contact mechanics model considering surface adhesion force. Increased Young's modulus was discovered with increasing acquisition frequency. It was measured 878 ± 274 kPa at 0.1 Hz and increased to 4586 ± 758 kPa at 2 kHz. The robust local probing of mechanical measurement as well as unprecedented high-resolution topography imaging open new avenues for quantitative nanomechanical mapping of soft polymers, and can be extended to soft biological systems.
Keywords
polydimethylsiloxane (PDMS); PeakForce quantitative nanomechanical mapping (PFQNM); fast force volume (FFV); Young's modulus; DMT model; atomic force microscopy (AFM);
Citations & Related Records
연도 인용수 순위
  • Reference
1 Carrillo, F., Gupta, S., Balooch, M., Marshall, S.J., Marshall, G.W., Pruitt, L. and Puttlitz, C.M. (2005), "Nanoindentation of polydimethylsiloxane elastomers: Effect of crosslinking, work of adhesion, and fluid environment on elastic modulus", J. Mater. Res., 20, 2820-2830. https://doi.org/10.1557/JMR.2005.0354.   DOI
2 Chuah, Y.J., Koh, Y.T., Lim, K., Menon, N.V., Wu, Y. and Kang, Y. (2015), "Simple surface engineering of polydimethylsiloxane with polydopamine for stabilized mesenchymal stem cell adhesion and multipotency", Sci. Rep., 5, 18162. https://doi.org/10.1038/srep18162.   DOI
3 Cortese, B., D'Amone, S., Manca, M., Viola, I., Cingolani, R. and Gigli, G. (2008), "Superhydrophobicity due to the hierarchical scale roughness of PDMS surfaces", Langmuir, 24, 2712-2718. https://doi.org/10.1021/la702764x.   DOI
4 Dimitriadis, E.K., Horkay, F., Maresca, J., Kachar, B. and Chadwick, R.S. (2002), "Determination of elastic moduli of thin layers of soft material using the atomic force microscope", Biophys. J., 82, 2798-2810. https://doi.org/10.1016/S0006-3495(02)75620-8.   DOI
5 Sia, S.K. and Whitesides, G.M. (2003), "Microfluidic devices fabricated in poly (dimethylsiloxane) for biological studies", Electrophoresis, 24, 3563-3576. https://doi.org/10.1002/elps.200305584.   DOI
6 Supraja, N., Dhivya, J., Prasad, T. and David, E. (2018), "Synthesis, characterization and dose dependent antimicrobial and anticancerous efficacy of phycogenic (Sargassum muticum) silver nanoparticles against breast cancer cells (MCF 7) cell line", Adv. Nano Res., Int. J., 6(2), 183-200. https://doi.org/10.12989/anr.2018.6.2.183.   DOI
7 Trtik, P., Kaufmann, J. and Volz, U. (2012), "On the use of peak-force tapping atomic force microscopy for quantification of the local elastic modulus in hardened cement paste", Cem. Concrete Res., 42, 215-221. https://doi.org/10.1016/j.cemconres.2011.08.009.   DOI
8 Vahdat, V., Grierson, D.S., Turner, K.T. and Carpick, R.W. (2013), "Mechanics of interaction and atomic-scale wear of amplitude modulation atomic force microscopy probes", ACS Nano, 7, 3221-3235. https://doi.org/10.1021/nn305901n.   DOI
9 Wang, Z., Volinsky, A.A. and Gallant, N.D. (2015), "Nano-indentation study of polydimethylsiloxane elastic modulus using B erkovich and flat punch tips", J. Appl. Polym. Sci., 132, 41384. https://doi.org/10.1002/app.41384.   DOI
10 Villanueva-Cab, J. and Pal, U. (2017), "Evaluation of thermally and chemically reduced graphene oxide films as counter electrodes on dye-sensitized solar cells", Adv. Nano Res., Int. J., 5(3), 231-244. https://doi.org/10.12989/anr.2017.5.3.231.   DOI
11 Wu, J., Wang, R., Yu, H., Li, G., Xu, K., Tien, N.C., Roberts, R.C. and Li, D. (2015), "Inkjet-printed microelectrodes on PDMS as biosensors for functionalized microfluidic systems", Lab Chip, 15, 690-695. https://doi.org/10.1039/C4LC01121J.   DOI
12 Fard, M.Y., Raji, B. and Pankretz, H. (2020), "Time-scale through-thickness interphase in polymer matrix composites including hygrothermal treatment", Polym. Test., 83, 106365. https://doi.org/10.1016/j.polymertesting.2020.106365.   DOI
13 Xin, C., Chen, L., Li, T., Zhang, Z., Zhao, T., Li, X. and Zhang, J. (2018), "Highly sensitive flexible pressure sensor by the integration of microstructured PDMS film with a-IGZO TFTs", IEEE Electron. Device Lett., 39, 1073-1076. https://doi.org/10.1109/LED.2018.2839595.   DOI
14 Xu, K., Sun, W., Shao, Y., Wei, F., Zhang, X., Wang, W. and Li, P. (2018), "Recent development of peakforce tapping mode atomic force microscopy and its applications on nanoscience", Nanotechnol. Rev., 7, 605-621. https://doi.org/10.1515/ntrev-2018-0086.   DOI
15 Young, T., Monclus, M., Burnett, T., Broughton, W., Ogin, S. and Smith, P. (2011), "The use of the peakforceTM quantitative nanomechanical mapping AFM-based method for high-resolution Young's modulus measurement of polymers", Meas. Sci. Technol., 22, 125703. https://doi.org/10.1088/0957-0233/22/12/125703.   DOI
16 Ebrahimi, F., Seyfi, A. and Dabbagh, A. (2019), "Dispersion of waves in FG porous nanoscale plates based on NSGT in thermal environment", Adv. Nano Res., Int. J., 7(5), 325-335. https://doi.org/10.12989/anr.2019.7.5.325.   DOI
17 Efremov, Y.M., Shpichka, A., Kotova, S. and Timashev, P. (2019), "Viscoelastic mapping of cells based on fast force volume and peak force tapping", Soft Matter, 15, 5455-5463. https://doi.org/10.1039/C9SM00711C.   DOI
18 Zeng, G., Dirscherl, K. and Garnaes, J. (2018), "Toward accurate quantitative elasticity mapping of rigid nanomaterials by atomic force microscopy: effect of acquisition frequency, loading force, and tip geometry", Nanomaterials, 8, 616. https://doi.org/10.3390/nano8080616.   DOI
19 Ziaie, B., Baldi, A., Lei, M., Gu, Y. and Siegel, R.A. (2004), "Hard and soft micromachining for BioMEMS: Review of techniques and examples of applications in microfluidics and drug delivery", Adv. Drug Deliv. Rev., 56, 145-172. https://doi.org/10.1016/j.addr.2003.09.001.   DOI
20 Eltaher, M.A., Almalki, T.A., Ahmed, K.I. and Almitani, K.H. (2019), "Characterization and behaviors of single walled carbon nanotube by equivalent-continuum mechanics approach", Adv. Nano Res., Int. J., 7(1), 39-49. https://doi.org/10.12989/anr.2019.7.1.039.   DOI
21 Fujii, T. (2002), "PDMS-based microfluidic devices for biomedical applications", Microelec. Eng., 61, 907-914. https://doi.org/10.1016/S0167-9317(02)00494-X.   DOI
22 Germanicus, R.C., Mercier, D., Agrebi, F., Febvre, M., Mariolle, D., Descamps, P. and Leclere, P. (2020), "Quantitative mapping of high modulus materials at the nanoscale: Comparative study between atomic force microscopy and nanoindentation", J. Microsc., 280, 51-62. https://doi.org/10.1111/jmi.12935.   DOI
23 Hellwig, J., Karlsson, R.M., Wagberg, L. and Pettersson, T. (2017), "Measuring elasticity of wet cellulose beads with an AFM colloidal probe using a linearized DMT model", Anal. Methods, 9, 4019-4022. https://doi.org/10.1039/C7AY01219E.   DOI
24 Johnston, I., McCluskey, D., Tan, C. and Tracey, M. (2014), "Mechanical characterization of bulk Sylgard 184 for microfluidics and microengineering", J. Micromech. Microeng., 24, 035017. https://doi.org/10.1088/0960-1317/24/3/035017.   DOI
25 Krieg, M., Flaschner, G., Alsteens, D., Gaub, B.M., Roos, W.H., Wuite, G.J., Gaub, H.E., Gerber, C., Dufrene, Y.F. and Muller, D.J. (2019), "Atomic force microscopy-based mechanobiology", Nat. Rev. Phys., 1, 41-57. https://doi.org/10.1038/s42254-018-0001-7   DOI
26 Kang, L., Smith, S. and Wang, C. (2019), "Metal-organic framework preserves the biorecognition of antibodies on nanoscale surfaces validated by single-molecule force spectroscopy", ACS Appl. Mater. Interf., 12, 3011-3020. https://doi.org/10.1021/acsami.9b19551.   DOI
27 Kim, H.J., Matsuda, H., Zhou, H. and Honma, I. (2006), "Ultrasound-triggered smart drug release from a poly (dimethylsiloxane)-mesoporous silica composite", Adv. Mater., 18, 3083-3088. https://doi.org/10.1002/adma.200600387   DOI
28 Kim, K.S., Lin, Z., Shrotriya, P., Sundararajan, S. and Zou, Q. (2008), "Iterative control approach to high-speed force-distance curve measurement using AFM: Time-dependent response of PDMS example", Ultramicroscopy, 108, 911-920. https://doi.org/10.1016/j.ultramic.2008.03.001.   DOI
29 Lee, J.N., Park, C. and Whitesides, G.M. (2003), "Solvent compatibility of poly (dimethylsiloxane)-based microfluidic devices", Anal. Chem., 75, 6544-6554. https://doi.org/10.1021/ac0346712.   DOI
30 Liu, M., Sun, J., Sun, Y., Bock, C. and Chen, Q. (2009), "Thickness-dependent mechanical properties of polydimethylsiloxane membranes", J. Micromech. Microeng., 19, 035028. https://doi.org/10.1088/0960-1317/19/3/035028.   DOI
31 Liu, S., Gordiichuk, P., Wu, Z.S., Liu, Z., Wei, W., Wagner, M., Mohamed-Noriega, N., Wu, D., Mai, Y., Herrmann, A., Mullen, K. and Feng, X. (2015), "Patterning two-dimensional free-standing surfaces with mesoporous conducting polymers", Nat. Commun., 6, 1-9. https://doi.org/10.1038/ncomms9817.   DOI
32 Reyes, O., Sanchez, M.F., Pal, M., Llorca, J. and Sebastian, P. (2017), "Evolution pathway of CZTSe nanoparticles synthesized by microwave-assisted chemical synthesis", Adv. Nano Res., Int. J., 5(3), 203-214. https://doi.org/10.12989/anr.2017.5.3.203.   DOI
33 Adamcik, J., Berquand, A. and Mezzenga, R. (2011), "Single-step direct measurement of amyloid fibrils stiffness by peak force quantitative nanomechanical atomic force microscopy", Appl. Phys. Lett., 98, 193701. https://doi.org/10.1063/1.3589369.   DOI
34 Bensaid, I. (2017), "A refined nonlocal hyperbolic shear deformation beam model for bending and dynamic analysis of nanoscale beams", Adv. Nano Res., Int. J., 5(2), 113-126. https://doi.org/10.12989/anr.2017.5.2.113.   DOI
35 Binnig, G., Quate, C.F. and Gerber, C. (1986), "Atomic force microscope", Phys. Rev. Lett., 56, 930-933. https://doi.org/10.1103/PhysRevLett.56.930.   DOI
36 Mata, A., Fleischman, A.J. and Roy, S. (2005), "Characterization of polydimethylsiloxane (PDMS) properties for biomedical micro/nanosystems", Biomed. Microdev., 7, 281-293. https://doi.org/10.1007/s10544-005-6070-2.   DOI
37 McDonald, J.C. and Whitesides, G.M. (2002), "Poly (dimethyllsiloxane) as a material for fabricating microfluidic devices", Acc. Chem. Res., 35(7), 491-499. https://doi.org/10.1021/ar010110q.   DOI
38 Piruska, A., Nikcevic, I., Lee, S.H., Ahn, C., Heineman, W.R., Limbach, P.A. and Seliskar, C.J. (2005), "The autofluorescence of plastic materials and chips measured under laser irradiation", Lab Chip, 5, 1348-1354. https://doi.org/10.1039/B508288A.   DOI
39 Punjabi, K., Mehta, S., Yedurkar, S., Jain, R., Mukherjee, S., Kale, A. and Deshpande, S. (2018), "Extracellular synthesis of silver nanoparticle by pseudomonas hibiscicola-mechanistic approach", Adv, Nano Res., Int. J., 6(1), 81-92. https://doi.org/10.12989/anr.2018.6.1.081.   DOI
40 Sarrazin, B., Brossard, R., Guenoun, P. and Malloggi, F. (2016), "Investigation of PDMS based bi-layer elasticity via interpretation of apparent Young's modulus", Soft Matter, 12, 2200-2207. https://doi.org/10.1039/C5SM02133B.   DOI
41 Carl, P. and Schillers, H. (2008), "Elasticity measurement of living cells with an atomic force microscope: Data acquisition and processing", Pflugers Arch., 457, 551. https://doi.org/10.1007/s00424-008-0524-3.   DOI
42 Schillers, H., Medalsy, I., Hu, S., Slade, A.L. and Shaw, J.E. (2016), "Peakforce tapping resolves individual microvilli on living cells", J. Mol. Recognit., 29, 95-101. https://doi.org/10.1002/jmr.2510.   DOI
43 Shi, X. and Zhao, Y.P. (2004), "Comparison of various adhesion contact theories and the influence of dimensionless load parameter", J. Adhes. Sci. Technol., 18, 55-68. https://doi.org/10.1163/156856104322747009.   DOI
44 Brown, X.Q., Ookawa, K. and Wong, J.Y. (2005), "Evaluation of polydimethylsiloxane scaffolds with physiologically-relevant elastic moduli: Interplay of substrate mechanics and surface chemistry effects on vascular smooth muscle cell response", Biomaterials, 26(16), 3123-3129. https://doi.org/10.1016/j.biomaterials.2004.08.009.   DOI
45 Cao, Y., Yang, D. and Soboyejoy, W. (2005), "Nanoindentation method for determining the initial contact and adhesion characteristics of soft polydimethylsiloxane", J. Mater. Res., 20(8), 2004-2011. https://doi.org/10.1557/JMR.2005.0256.   DOI