• Ocean Systems Engineering
• /
• v.5 no.1
• /
• pp.1-19
• /
• 2015

The water jetting system for a jack-up spudcan requires the suitable design considering the platform/spudcan particulars, environments, and soil conditions, either the surficial clay or surficial sand. The usage of water jetting depends critically on soil conditions. The water jetting is usually used for the smooth and fast extraction of the spudcan in the surficial clay condition. It is also required for inserting spudcan up to the required depth in the surficial sand condition, which is investigated in this paper. Especially, it should be very careful to use the water jetting during an installation of spudcan in the surficial sand condition, because there is a risk of overturning accident related to the punch-through. Therefore, in this study, the effect of water jetting flow rate and time on the change of soil properties and penetration resistance is analyzed to better understand their interactions and correlations when inserting the spudcan with water jetting in surficial sand condition. For the investigation, a wind turbine installation jack-up rig (WTIJ) is selected as the target platform and the multi layered soil (surficial sand overlaying clays) is considered as the soil condition. The environmental loading and soil-structure interaction (SSI) analysis are performed by using CHARM3D and ANSYS. This kind of investigation and simulation is needed to decide the proper water jetting flow rate and time of spudcan for the given design condition.

• Korean Journal of Construction Engineering and Management
• /
• v.12 no.2
• /
• pp.72-80
• /
• 2011

Recently, significance of efficiency in construction projects have been increased. So effective new delivery systems are required to improve project quality and value. Those systems could also reduce period, cost, risk and waste of the construction. Also, as current government aims 'Low carbon and Green growth', it is important to manage integrated supervision from the pre-design stage to the operation stage. In USA, AIA suggested IPD which encourages mutual cooperation among stakehklder to improve the productivity. Therefore, this study analyzes the characteristics of the IPD and deduct Present condition and Perception of Domestic Construction Environment to Introduce IPD.

• Journal of the Korean Society for Railway
• /
• v.20 no.3
• /
• pp.356-364
• /
• 2017

The process of inspecting electric railway vehicles is complicated and these vehicles accompany a risk of safety accidents. This developed system will be a great help in simplifying the shunting process and be very useful in terms of ensuring safety and providing user convenience. In this paper, the results of performance evaluation tests are studied on a movable catenary system for railway vehicles that secured mechanical durability, convenience, and operator safety by applying a specific rigid bar catenary of an existing mobile train line. We presented an analysis of the basic characteristics for site installation including sorting. In conclusion, this developed system was obtained in good results through durability test, durable mechanical load test and safety test in require specifications.

• Earthquakes and Structures
• /
• v.20 no.1
• /
• pp.71-86
• /
• 2021

This paper focuses on the development and assessment of the expected damage for the rocking response of rigid anchored blocks, with irregular geometry and non-uniform mass distribution, considering the site conditions and the seismicity of Mexico City. The non-linear behavior of the restrainers is incorporated to evaluate the pure tension and tension-shear failure mechanisms. A probabilistic framework is performed covering a wide range of block sizes, slenderness ratios and eccentricities using physics-based ground motion simulation. In order to incorporate the uncertainties related to the propagation of far-field earthquakes with a significant contribution to the seismic hazard at study sites, it was simulated a set of scenarios using a stochastic summation methods of small-earthquakes records, considered as Empirical Green's Function (EGFs). As Engineering Demand Parameter (EDP), the absolute value of the maximum block rotation normalized by the body slenderness, as a function of the peak ground acceleration (PGA) is adopted. The results show that anchorages are more efficient for blocks with slenderness ratio between two and three, while slenderness above four provide a better stability when they are not restrained. Besides, there is a range of peak intensities where anchored blocks located in soft soils are less vulnerable with respect to those located in firm soils. The procedure used in here allows to take decisions about risk, reliability and resilience assessment of different types of contents, and it is easily adaptable to other seismic environments.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.64 no.5
• /
• pp.53-65
• /
• 2022

Most of the reservoirs managed by the city and county are small and it is difficult to respond to climate change because the drainage area is small and the inflow increases rapidly when a heavy rain occurs. In this study, the current status of reservoirs managed by city and county in Gyeonggi-do was reviewed and flood vulnerability due to climate change was analyzed. In order to analyze the impact of climate change, CMIP6-based future climate scenario provided by IPCC was used, and future rainfall data was established through downscaling of climate scenario (SSP8-8.5). The flood vulnerability of reservoirs due to climate change was evaluated using the concept provided by the IPCC. The future annual precipitation at six weather stations appeared a gradual increase and the fluctuation range of the annual precipitation was also found to increase. As a result of calculating the flood vulnerability index, it was analyzed that the flood vulnerability was the largest in the 2055s period and the lowest in the 2025s period. In the past period (2000s), the number of D and E grade reservoirs was 58, but it was found to increase to 107 in the 2055s period. In 2085s, there were 17 E grade reservoirs, which was more than in the past. Therefore, it is necessary to take measures against the increasing risk of flooding in the future.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.55 no.6
• /
• pp.836-843
• /
• 2022

In the present study, exposure to heavy metals by consumption of edible seaweeds (green laver, laver, hijiki, sea tangle, and sea mustard) was assessed based on their concentrations of lead (Pb), cadmium (Cd), arsenic (As), and mercury (Hg). The mean of heavy metal concentrations were 0.006-0.023 mg/kg for Pb, 0.037-0.156 mg/kg for Cd, 1.117-15.928 mg/kg for As, and 0.008-0.021 mg/kg for Hg. In multivariate analysis, the correlations were high between Pb levels in sea mustard, Cb levels in laver, and As and Hg level in Hijiki. However, the estimated daily intake and target hazard quotient (THQ) of the heavy metals in edible seaweeds were below their approved limits suggesting no health risks associated with seaweed consumption by Koreans.

• Journal of Environmental Science International
• /
• v.32 no.5
• /
• pp.315-328
• /
• 2023

Cyanobacteria have been used as pollution indicator species in freshwater ecosystems, and identifying their fluctuations can be an important part about management of surface waters globally. Cyanotoxins produced by cyanobacteria are directly or indirectly a threat to human and environmental health. In order to confirm the potential risk of these cyanotoxins, the fluctuations of phytoplankton and phylogenetic analysis of cyanotoxin synthetase genes were conducted at each point in the Yeongsan River water system in Gwangju from November 2021 to October 2022. Diatoms which grow well in winter were dominant at 99.4 ~ 99.5%, and diatoms and green algae were dominant from the spring to autumn when the water temperature rises. Stephanodiscus spp. were dominant at 92.7 to 97.5 % at all sites in the winter, and Aulacoseira spp., which grow in warm water temperatures, were dominant in summer and autumn. Microcystis aeruginosa was dominant at 25.2% in summer only at site 5. mcyB and anaC have been detected as cyanotoxin synthetase genes. The phylogenetic tree of anaC could be divided into two groups (Group 1 & Group 2). Group 1 contained Aphanizomenon sp. and Cuspidothrix issatschenkoi. It is combined with Aphanizomenon sp. and Cuspidothrix issatschenkoi, which are known to produce cyanotoxins.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.164-164
• /
• 2022

The soybean (Glycine max(L.) Merrill), an important food crop in the world, is popular because of its high quality protein and oil content. Soybeans as a food have long been known for their beneficial effects on health and are well-recognized globally. Isoflavones, significant soybean secondary metabolic products, may be crucial in avoiding some cancers and lowering the risk of cardiovascular disorders. This study investigates the correlation between plant growth regulator and the effect on the isoflavone levels in soybean leaves. The study was carried out in the green-house of the southern crop department in miryang. Soybeans(Seonpung) were cultivated in 1/2000 of the Wagner pot. Ethephon(500, 1000, 2000 ppm) and ABA(100, 200, 400 ppm) were used as plant growth regulators, and they were each treated on R2, R5, and R7 stage. After treatment, leaves were sampled three times at intervals of 5 days, and the content of 6 isoflavones and coumestrol was analyzed. Soybean isoflavones were analyzed using Ultra Performance Liquid Chromatography (Acquity UPLC H-Class system, Waters). The isoflavones content showed an overall highly in the R5 stage, and the level was similar to that of no treatment in the R2 and R7 stage. The difference between the growth regulators was found to be higher than that of ethephon when ABA was treated. The coumestrol content was confirmed to be high in the order of R7, R5, and R2 on the treatment time, and it was found that the content increased as the treatment time was delayed. In the treatment with the growth regulator, the coumestrol content tended to be higher when ethephon was treated than ABA.

• Advances in concrete construction
• /
• v.16 no.1
• /
• pp.35-57
• /
• 2023

Majority of the plastic produced each year is being disposed in land after single-use, which becomes waste and takes up a lot of storage space. Therefore, there is an urgent need to find alternative solutions instead of disposal. Recycling and reusing the PET plastic waste as aggregate replacement and fiber in concrete production can be one of the eco- friendly methods as there is a great demand for concrete around the world, especially in developing countries by raising human awareness of the environment, the economy, and Carbon dioxide (CO2) emissions. Self-compacting concrete (SCC) is a key development in concrete technology that offers a number of attractive features over traditional concrete applications. Recently, in order to improve its durability and prevent such plastics from directly contacting the environment, various kinds of plastics have been added. This review article summarizes the latest evident on the performance of SCC containing recycled PET as eco-friendly aggregates and fiber. Moreover, it highlights the influence of substitution content, shape, length, and size on the fresh and properties of SCC incorporating PET plastic. Based on the findings of the articles that were reviewed for this study, it is observed that SCC made of PET plastic (PETSCC) can be employed in construction era owing to its acceptable mechanical and fresh properties. On the other hand, it is concluded that owing to the lightweight nature of plastic aggregate, Reusing PET waste in the construction application is an effective approach to reduces the earthquake risk of a building.

• Journal of Food Hygiene and Safety
• /
• v.33 no.4
• /
• pp.240-247
• /
• 2018

This study was carried out to determine the levels of lead and cadmium as found in nine agricultural products (n = 578) sold in Korea, and to estimate the risk to human health that is summarily associated with their intake. The concentrations of Pb and Cd were measured using an ICP-MS after microwave digestion in this study. The average contents of Pb and Cd were measured as 0.014 and 0.017 mg/kg for barley, 0.006 and 0.005 mg/kg for mung bean, 0.008 and 0.007 mg/kg for kidney bean, 0.010 and 0.004 mg/kg for green bean, 0.008 and 0.001 mg/kg for pineapple, 0.016 and 0.002 mg/kg for apricot, 0.015 and 0.002 mg/kg for Japanese apricot, 0.021 and 0.002 mg/kg for plum and 0.019 and 0.003 mg/kg for jujube, respectively. The levels of Pb and Cd in the study samples were less than the maximum residual levels established by the European Union (EU), CODEX, and the Korea Food Code. As we have seen, the daily dietary exposures of Pb and Cd from these agricultural products for the general population were noted as 0.067% of PTWI ($25{\mu}g/kg$ b.w./week) and 0.28% of PTMI ($25{\mu}g/kg$ b.w./month), respectively. In line with the study conclusions, these results suggest that the current dietary intakes of Pb and Cd from these agricultural products in Korea have no appreciable risk effects on health for humans as noted in this experiment.