• Journal of the Korea Society of Computer and Information
• /
• v.19 no.1
• /
• pp.131-140
• /
• 2014

TMost of the medical images that are being used today are to confirm the existence of lesions. These kind of medical images can not only be used to confirm lesions but if we could use it for academic studies or for analysis and reference materials for surgical operations, it could offer great help in medical studies. Furthermore, we could reduce the number of errors in treatment through simulations in the surgical operations and treatments. In this paper, the necessary parts regarding the medical image visuals were extracted through the point cloud and by using the information obtained through it, it manufactures the necessary information for academic studies, diagnoses or operations. By designing and realizing the system which makes simulation possible with the manufactured information, the paper attempts to provide a more effective way to approach academic studies or giving appropriate diagnoses in the treatment of patients.

• Journal of Korean Physical Therapy Science
• /
• v.4 no.1
• /
• pp.243-253
• /
• 1997

The purpose of this study was to determine the effect of systolic blood pressure, heart rate and myocardial oxygen consumption on 3-point nonweight bearing ambulation with axillary wooden crutch according to age. The subjects were fifty healty volunteers(22 male, 28 female), ages from 20 to 69(mean age of 43.8 years) with no history of cardiovascular or respiratory disease, diabetes mellitus, arthritis and orthopedic disorder within the past three years. This study was carried out from May 10 to August 10, 1996. The data were analyzed by percentage, mean and standard deviation and ANOVA. The results were as follows : 1. In systolic blood pressure(SBP), there was no significantly change between before walk and after 20 m in crutch walking with age, however, there did differ significantly after 40 m and 60 m in crutch walking(p<0.01, p<0.001). 2. In heat rate(HR), there was no significantly change between before walk and after 20 m, 40 m in crutch walking with age, however, there did differ significantly after 60 m in crutch walking(p<0.05). 3. In myocardial oxygen consumption($MVO_{2}$), there was no significantly change between before walk and after 20m in crutch walking with age, however, there did differ significantly after 40 m and 60 m in crutch walking(p<0.01, p<0.001). These result showed that cardiovascular system had a great effect on the olderly when 3-point nonweight bearing ambulation with axillary wooden crutch. Therefore, when train for axillary crutch in the olderly, we needed suitably basis of walking distance.

• Polymer(Korea)
• /
• v.36 no.1
• /
• pp.88-92
• /
• 2012

Long-term performance of polymer under constant sustained load has been the main research focus, which created a need for the accelerated test method providing proper lifetime assessment. Cycling fatigue loading is one of the accelerated test method and has been of great interest. Microstructure change of high density polyethylene under cyclic fatigue loading and creep was examined utilizing a tensile device specially designed for creep and fatigue test and also can be attachable to the X-ray diffractometer. In this way, the crystal morphology change of polyethylene under creep and cyclic fatigue load was successfully monitored and compared. Despite the marked differences in macroscopic deformation between the creep and cyclic fatigue tests, crystal morphology such as crystallinity, crystal size, and $d$-spacing was as nearly identical between the two test cases. Specimens pre-deformed to different strains, i.e., before yield point (BYP), at yield point (YP) and after yield point (AYP), however, showed markedly different changes in crystal morphology, especially between AYP and the other two specimens.

• Advances in concrete construction
• /
• v.8 no.3
• /
• pp.173-185
• /
• 2019

This article presents a comparative study of the effect of steel layouts on the seismic behavior of transition steel-concrete composite connections, both experimental and analytical investigations of concrete filled steel tube-reinforced concrete (CFST-RC) and steel reinforecd concrete-reinforced concrete (SRC-RC) structures were conducted. The steel-concrete composite connections were subjected to combined constant axial load and lateral cyclic displacements. Tests were carried out on four full-scale connections extracted from a real project engineering with different levels of axial force. The effect of steel layouts on the mechanical behavior of the transition connections was evaluated by failure modes, hysteretic behavior, backbone curves, displacement ductility, energy dissipation capacity and stiffness degradation. Test results showed that different steel layouts led to significantly different failure modes. For CFST-RC transition specimens, the circular cracks of the concrete at the RC column base was followed by steel yielding at the bottom of the CFST column. While uncoordinated deformation could be observed between SRC and RC columns in SRC-RC transition specimens, the crushing and peeling damage of unconfined concrete at the SRC column base was more serious. The existences of I-shape steel and steel tube avoided the pinching phenomenon on the hysteresis curve, which was different from the hysteresis curve of the general reinforced concrete column. The hysteresis loops were spindle-shaped, indicating excellent seismic performance for these transition composite connections. The average values of equivalent viscous damping coefficients of the four specimens are 0.123, 0.186 and 0.304 corresponding to the yielding point, peak point and ultimate point, respectively. Those values demonstrate that the transition steel-concrete composite connections have great energy dissipating capacity. Based on the experimental research, a high-fidelity ABAQUS model was established to further study the influence of concrete strength, steel grade and longitudinal reinforcement ratio on the mechanical behavior of transition composite connections.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.1
• /
• pp.239-246
• /
• 2019

The drone photogrammetry is actively utilized for obtaining highly accurate spatial information and other various monitoring purposes. It is general to plan the drone photogrammetry by referring to previous experiences or cases in order to obtain the required accuracy, but the drone photogrammetry is often carried out again due to poor accuracy. Since the required spatial accuracy of the drone photogrammetry process result becomes the means of objective evaluation regardless of the type of result, it should be determined carefully. Therefore, it is necessary to determine flight height, overlap, number and arrangement of ground control point, and exterior orientation factor acquisition method in order to meet the required 3D positional accuracy for the design of drone photogrammetry project. In this study, previous study cases for the analysis of drone photogrammetry accuracy were carefully analyzed and verified by applying such cases to testing area, and design guideline of drone photogrammetry project for a small area was prepared based on the analysis result. The presented project design guideline is expected to be a great help to business practice although it is not perfect, and if the design guideline is prepared through comprehensive analysis in future, it would be possible to provide a perfect manual.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.8
• /
• pp.3578-3585
• /
• 2012

The purpose of this study was to establish the critical limit at CCP (Critical Control Point) of HACCP (Hazard Analysis Critical Control Point) system for instant noodle and it was conducted at P company in Ichen(Gyeonggi-do), Korea. According to the CCP, Fried process were experimented to removal and decrease of microbiological and chemical hazards by measuring of each temperature and times. As a result, the standard plate count and pathogenic microorganism were not detected by fried processing (Temperature : $145{\pm}10^{\circ}C$, Time : $75{\pm}30$ sec). The acid value of chemical hazards produced by fried processing was able to manage, showed lower (0.2) than the legal limit (0.6). Air-borne bacterial examination results detected(3 CFU/mL, 3 CFU/mL) in the Frying Room and Steam Room. Therefore, the CCP-BC of fried process would be a great alternative to prevent and remove hazard analysis, such as general and pathogenic microorganism (E. coli O157:H7, B. cereus, Listeria monocytogenes, Salmonella spp, Sthaph. aureus etc), chemical hazard analysis. In conclusion, it suggested that HACCP plan was necessary for management standard and systematic approach in establishement of critical limit, solving the problem, method of verification, education and records management by fried processing.

• Journal of the Korea Society for Simulation
• /
• v.32 no.3
• /
• pp.1-8
• /
• 2023

Modeling of artificial targets in Synthetic Aperture radar (SAR) mainly simulates radar signals reflected from the faces and edges of the 3D Computer Aided Design (CAD) model with a ray-tracing method, and modeling of the clutter on the Earth's surface uses a method of distinguishing types with similar distribution characteristics through statistical analysis of the SAR image itself. In this paper, man-made targets on the surface and background clutter on the terrain are integrated and made into a three-dimensional (3D) point cloud scatterer model, and SAR image were created through computational signal processing. The results of the SAR Stripmap image generation of the actual automobile based SAR radar system and the results analyzed using EM modeling or statistical distribution models are compared with this 3D point cloud scatterer model. The modeling target is selected as an bridge because it has the characteristic of having both water surface and ground terrain around the bridge and is also a target of great interest in both military and civilian use.

• Journal of the Korea society of information convergence
• /
• v.5 no.2
• /
• pp.25-35
• /
• 2012

In morern the distrivbution industry an enterprise have many similar tactics. Improvement of distribution structure is importance of a subject and have a great relative importance nationally. The change of national distribution industry. A variety of Life styles and consumption trends have many changes on distribution structure and have a variety of tactics, too. Therefore this study is expectrd to be the material basis data in development of the distribution industry and to be a starting point.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.52
• /
• pp.73-96
• /
• 2011

The economic globalization has contributed the easy interchangeability of goods and services worldwide and consequently this tendency gives a great impetus to the expansion of exhibition Nowadays there is no dispute that the exhibition industry contains Export Marketing, Sales, Market Research and New product launching. This paper is trade show strategy use for export firms. Therefore, paper discusses theory of exhibition, character and utility. Moreover study to basic strategy of participate in Trade show Participate in Trade show strategies are several point. First, Trade show goal accord to firm's purpose. Second, Devise of trade show competition strategy. Third, Support of government and relevant agency. forth, Trade Show insurance.

• Korean Journal of Computational Design and Engineering
• /
• v.1 no.1
• /
• pp.65-75
• /
• 1996

This paper describes an automatic finite element(FE) mesh generation for three-dimensional structures consisting of free-form surfaces. This mesh generation process consists of three subprocesses: (a) definition of geometric model, i.e. analysis model, (b) generation of nodes, and (c) generation of elements. One of commercial solid modelers is employed for three-dimensional solid and shell structures. Node is generated if its distance from existing node points is similar to the node spacing function at the point. The node spacing function is well controlled by the fuzzy knowledge processing. The Delaunay method is introduced as a basic tool for element generation. Automatic generation of FE meshes for three-dimensional solid and shell structures holds great benefits for analyses. Practical performances of the present system are demonstrated through several mesh generations for three-dimensional complex geometry.