• 한국음향학회:학술대회논문집
• /
• 한국음향학회 2004년도 춘계학술발표대회 논문집 제23권 1호
• /
• pp.297-300
• /
• 2004

Perforated elements are extensively used in mufflers for the intake and exhaust systems of various fluid machines. Perforated elements are usually exposed to grazing flow or cross flow. For analyzing performances of mufflers, the impedance of perforated elements with mean flow is very important. The impedance of perforates under both conditions are measured with different experimental setups. Even if there is no flow, the preceding experimental method for grazing flow shows different values with both theoretical ones and measured under cross flow setup. Using high-order analysis considering phase differences, the experimental method for grazing flow can be modified. The acoustical impedance of perforated impedance contains interaction effects between orifices. After correcting these effects, the measured impedance with grazing flow setup show similar results with both theoretical impedance and measured ones under cross flow setup.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.879-884
• /
• 2003

This paper is to experimentally investigate the effect of the through-flow and grazing-flow on the absorption performance of a perforated plate system. The experiment is performed through the systematic change of the through-flow velocity, grazing-flow velocity, incident sound pressure level, and the geometrical parameters such as the porosity and hole diameter. From the experimental results, it is found that for the nonlinear relationship between the acoustic resistance and incident sound pressure level there is no influence of the through-flow on the absorption performance, but fur the linear relationship between them there is a strong dependence of the absorption performance on the through-flow velocity. It is also shown that the absorption performance is controllable by changing the porosity and hole-diameter in size.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.1372-1375
• /
• 2006

The simplified impedance model which can consider a combined flow condition was suggested. Although the strength and position of the shear layer cannot be obtained by a linear sum of two separate contributions when both flows occur together, it was simply assumed that the impedance under the combined flow follows from summing the separate flow impedance. To validate the simplified impedance model, acoustic properties of a concentric resonator was predicted and measured. The predicted transmission loss using the simplified model shows reasonable agreements with measurements. One can find that the simplified impedance model obtained by the superposition of the separate flow impedances can be adjusted to predict the acoustic properties of a concentric resonator.

• Advances in Computational Design
• /
• 제8권4호
• /
• pp.273-293
• /
• 2023

This study evaluated the acoustic performance of two configurations of serial HR arrays and lined HR arrays in the presence of grazing flow using a 3D numerical simulation. The dual, triple, and quad HR arrays were compared to the conventional HR array. The simulation results showed that the number of resonant frequencies increased with the number of serial HR arrays. The C_TL did not significantly change with the number of serial HR arrays. The acoustic performance of the two, three, and four-lined HR arrays was compared to the conventional HR array. The results showed that the resonant frequency and TLmax increased with the number of lined HR arrays. The C_TL also increased with the number of lined HR arrays. The effect of the grazing flow Mach number (M_a) was investigated on the four-lined HR array configuration and compared to the conventional HR configuration. TLmax and C_TL decreased for both configurations with increasing M_a. The four-lined HR array configuration had significantly better acoustic performance than the conventional HR configuration. The TLmax and C_TL increased by more than 300% when the configuration was changed from the conventional HR to the four-lined HR array at M_a = 0.The increment percentage decreased with increasing M_a.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2003년도 하계학술대회 논문집
• /
• pp.200-200
• /
• 2003

• The Korean Journal of Ecology
• /
• 제8권3호
• /
• pp.153-161
• /
• 1985

Energy flow through the trophic levels was studied at a salt marsh ecosystem distinguished into low and high marsh. Gross primary productions of Suaedeto-Salicornietum and Artemisieto-Limonietum at low marsh were 8, 299 and 13, 154kca/$m^2$/yr, and those of Calama-grostetum and Sonchuso-Setaetum at high marsh were 17, 899 and 15, 177kca/$m^2$/yr, respectively. Efficiencies of solar energy utilization of plants were 1.7 and 2.6% at the former, and were 3.6 and 3.2% at the latter. Of gross productions, net primary productions were 3, 977 and 5, 280kca/m2/yr at low marsh and were 6, 354 and 5, 329kca/$m^2$/yr at high marsh, and the remainder, 52~67%, was consumed by respiration of plants. A small amount (0.03~0.04%) of the net primary production was flowed through grazing food chain and most amout was transferred into dead parts. Of dead parts, 40% was accuulated as litter and the rest was decomposed into detritus. In the detritus food chain, a little energy was utilized by detritus feeder, and a major by microorganism. The amounts of energy flowed through grazing and detritus feeders at high marsh were much more than those at low marsh, but tertary production as spider was Vice versa.

• 한국해양학회지
• /
• 제30권5호
• /
• pp.426-435
• /
• 1995

탄소순환에서 섬모충류에 의한 직접적인 박테리아 섭식의 중요성을 알아보기 위하 여 만경 동진강 염하구에서 1993년 10월부터 1995년 3월까지 4회에 걸쳐 섬모충류의 수도(abundance)와 생물량 그리고 40um 이하의 작은 섬모충류의 박테리아 섭식률을 조 사하였다. 40 um이하의 작은 크기 섬모충류 수도는 전체 섬모충류 수도의 평균49.5%이 상을 차지하였다. 이러한 작은 크기 섬모충류의 박테리아 섭식률은 시간당 18.0106.3 nl cell/SUP -1/로 박테리아의 수도가 증가할수록 여과율은 감소하는 반면, 섭식률은 증가하는 경향을 보여 박테리아의 농도가 섭식률에 영향을 미치는 것으로 보인다. 섬 모충류의 섭식이 박테리아 생산력중 차지하는 비율은 0.1-12.2%로 박테리아 수도가 증 가함에 따라 박테리아 생산력중 섬모충류에 섭식되는 비가 지수적으로 증가하는 경향 ($r^2$=0.62,p$\leq$0.001)을 보였다. 즉, 섬모충류의 섭식이 박테리아에 미치는 영향을 전 형적인 연안에서는 작으나 박테리아의 농도가 높은 부영양화 지역에서는 더 클 것으로 추측된다. 탄소순환에서 작은 섬모충류가 박테리아를 섭식하여 얻는 탄소량은 섬모충 류가 최대생산력 을 나타낼 때 필요탄소량의 평균3.1%에 불과하여 미소순환고리에서 섬모충류는 박테리아의 직접적인 섭식자보다는 최종적인 섭식자로서의 역할이 큰 것으 로 생각된다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1998년도 춘계학술대회논문집; 용평리조트 타워콘도, 21-22 May 1998
• /
• pp.478-485
• /
• 1998

The interior of open cavities exposed to a grazing flow is known to experience, strong periodic pressure, oscillations sustained for a wide range of flow velocities. In this study, an original approach was followed to develop a describing function model for the flow-excitation mechanism, governed by the shedding of discrete vortices within the shear layer over the orifice. A feedback loop analysis was performed to predict the frequency and the amplitude of the interior pressure fluctuations. Furthermore, a limit cycle stability analysis based on the extended Nyquist Stability criterion allowed the predictions of the onset and termination velocities for various modes. The analytical model was verified experimentally.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 2001년도 추계학술발표대회 논문집 제20권 2호
• /
• pp.375-378
• /
• 2001

천공 요소는 유체 기계의 흡기계나 배기계의 소음기에 널리 사용되고 있으며, 스치는 유동 (grazing flow)과 통과하는 유동 (cross flow)을 접하게 된다. 천공 요소의 임피던스는 소음기의 음향학적인 특성에 영향을 미치게 된다 본 연구에서는 유동이 임피던스에 미치는 영향을 고려하기 위하여, 실험을 통하여 얻은 임피던스 값을 유동 레지스턴스 (flow resistance)와 종단 보정 비 (end correction ratio)로 나타내고, 스트롤 수 (Strouhal number)로 무차원 화하여 분석하였다 이를 난류를 고려하여 제안된 선행 임피던스 모델들과 비교하여 난류가 미치는 영향을 분석하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.379-382
• /
• 2003

천공요소는 자동차의 배기 소음기, 공조기의 소음기 등을 포함하는 다양한 소음계에 널리 사용된다. 일반적으로 천공요소 들은 평균 유동과 소음원이 동시에 존재하는 환경에서 사용되며, 평균 유동 및 관 내부의 음압 레벨의 변화가 천공 부근에서의 임피던스에 큰 영향을 미치게 된다. 천공요소의 임피던스의 변화는 소음기의 음향학적 특성에 영향을 미치게 되므로, 유동이나 음압 조건이 임피던스에 미치는 영향에 대한 연구가 중요하다. 본 연구에서는 정밀 계측 및 전산유체역학적 모형을 이용해 천공요소의 임피던스에 영향을 미치는 주요 세 가지 인자 - 스치는 유동, 통과하는 유동, 음압 레벨 - 들을 고려하여 임피던스를 분석하고, 그 상관관계를 밝혔다.