• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.29
• /
• pp.39-61
• /
• 2006

The governing law in international commercial arbitration may be divided into governing arbitration law and governing substantive law. The former governs the parties' arbitration agreement and the conduct of any subsequent arbitration. But the later governs the parties' substantive rights and obligations, which means the law that governs contract formation and performance, and the law to be applied by the arbitrator to the merits of the dispute. The purpose of this paper is to examine how to determine the substantive governing law when there is express choice or implied choice between parties. Moreover this author checked any restrictions on party autonomy and also any possibilities to deviate from the governing law. In case of express choice the sources of the law or rules of law might be the national law of one of the parties, the neutral law, the general principles of law or lex mercatoria according to the arbitration law selected by the arbitral tribunal. Some arbitration laws or rules empower the arbitrator to decide the case ex aequo et bono or to act as amiable compositions. If the governing law could be determined expressly or impliedly by the parties, the arbitral tribunal would make a selection. In this case the criteria for selecting a governing law are not exactly same from country to country. But failing any indication by the parties as to governing law, the arbitral tribunal should apply the rules of law, the law or the law under the rule of conflict that the arbitrators consider applicable, according to the governing arbitration law. Among the connecting factors offered by the conflict rules, (which means the factors that the arbitrators consider applicable), some legal systems give precedence to the formation of the contract, other system to the place of performance of the contract, and others to the closest connection or centre of gravity. But the Rome Convention, which unified the conflict rules of the contracting states, gives precedence to the law of the domicile of the party which has to effect the performance which is characteristic of the contract. Finally this author suggested the Choice of Law Clause which covers governing substantive law and governing arbitration law at the same time. Thus the UNIDROIT Principles as well as any national law may be included as a governing law in international arbitration. So when we make sales or service contract, we should take into consideration of the UNIDROIT Principles as a governing law or a supplement to the governing law.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.1
• /
• pp.37.2-37.2
• /
• 2011

Our previous study on tiny pores (R < 2") observed by HINODE/Solar Optical Telescope (SOT) revealed that the plasma in the pores at the photosphere is always moving down and the pores are surrounded by the strong downward motions (highly red-shifted) of neighboring granulations. From this study, we speculated that the flow motions above the pore should be related with the motions at the photosphere, since the pore is strong magnetic field region. Meanwhile, SNU and KASI installed Fast Imaging Solar Spectrograph (FISS) in the Cude room of the 1.6 m New Solar Telescope (NST) at Big Bear Solar Observatory. FISS is a unique system that can do imaging of H-alpha and Ca II 8542 band simultaneously, which is quite suitable for studying of dynamics of chromosphere. To get some clue on the relationship between the photospheric and low-chromospheric motions at the pore region, we took a coordinate observation with NST/FISS and Hinode/SOT for new emerging active region (AR11117) on October 26, 2010. In the observed region, we could find two tiny pores and two small magnetic islands (SMIs), which have similar magnetic flux with the pores but does not look dark. Magnetic flux density and Doppler velocities at the photosphere are estimated by applying the center-of-gravity (COG) method to the HINODE/spectropolarimeter (SP) data. The line-of-sight motions above the photosphere are determined by adopting the bisector method to the wing spectra of Ha and CaII 8542 lines. As results, we found the followings. (1) There are upflow motion on the pores and downflow motion on the SMIs. (2) Towards the CaII 8542 line center, upflow motion decrease and turn to downward motion in pores, while the speed of down flow motion increases in the SMIs. (3) There is oscillating motion above pores and the SMIs, and this motion keep its pattern along the height. (4) As height increase, there is a general tendency of the speed shift to downward on pores and the SMIs. This is more clearly seen on the other regions of stronger magnetic field. In this talk, we will present preliminary understanding of the coupling of pore dynamics between the photosphere and the low-chromosphere.

• Economic and Environmental Geology
• /
• v.49 no.3
• /
• pp.213-224
• /
• 2016

Non-conventional resource and alternative energy were researched for predicting oil peak. In this study, one of many non-conventional resources, specifically oil-sands, was investigated due to the increasing interest of oil-sands plant modularization in permaforst areas for reducing the construction periods through modular transportation while limiting local construction workers. Hence, tehcnological trends were analyzed for oil-sand plant modularization. Data used were between 1994 and 2015 for patent analysis while targets included Korea, US, Japan, Europe and Canada. Technology classification system consisted of mining, steam assisted gravity drainage(SAGD), separation/upgrading/tailors ponds, module design/packaging, module transportation and material/maintenance. Result of patent analysis, patent application accounts 89% in US and Canada. The main competitive companies were Shell, Suncor and Exxon-mobil. Unlike other oil developments, oil-sands have a long-term stable production characteristic, hence, it is important to ensure the competitiveness of oil-sands for obtaining a patent in the long run.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.9
• /
• pp.712-722
• /
• 2018

This paper conducts parametric studies on flapping wing design, one of the most important design parameters of insect-mimicking aerial vehicles. Experimental study on wing shape was done through comparison and analysis of thrust, pitching moment, power consumption, and thrust-to-power ratio. A two-axis balance and hall sensor measure force and moment, and flapping frequency, respectively. Wing configuration is biplane configuration which can develop clap and fling effect. A reference wing shape is a simplified dragonfly's wing and studies on aspect ratio and wing area were implemented. As a result, thrust, pitching moment, and power consumption tend to increase as aspect ratio and area increase. Also, it is found that the flapping mechanism was not normally operated when the main wing has an aspect ratio or area more than each certain value. Finally, the wing shape is determined by comparing thrust-to-power ratio of all wings satisfying the required minimum thrust. However, the stability is not secured due to moment generated by disaccord between thrust line and center of gravity. To cope with this, aerodynamic dampers are used at the top and bottom of the fuselage; then, indoor flight test was attempted for indirect performance verification of the parametric study of the main wing.

• Journal of Internet Computing and Services
• /
• v.17 no.6
• /
• pp.17-23
• /
• 2016

In the future network such as Internet of Things (IoT), the number of computing devices are expected to grow exponentially, and each of the things communicates with the others and acquires information by itself. Due to the growing interest in IoT applications, the broadcasting in Opportunistic ad-hoc networks such as Machine-to-Machine (M2M) is very important transmission strategy which allows fast data dissemination. In distributed networks for IoT, the energy efficiency of the nodes is a key factor in the network performance. In this paper, we propose a fuzzy logic based probabilistic multi-hop broadcast (FPMCAST) algorithm which statistically disseminates data accordingly to the remaining energy rate, the replication density rate of sending node, and the distance rate between sending and receiving nodes. In proposed FPMCAST, the inference engine is based the fuzzy rule base which is consists of 27 if-then rules. It maps input and output parameters to membership functions of input and output. The output of fuzzy system defines the fuzzy sets for rebroadcasting probability, and defuzzification is used to extract a numeric result from the fuzzy set. Here Center of Gravity (COG) method is used to defuzzify the fuzzy set. Then, the performance of FPMCAST is evaluated through a simulation study. From the simulation, we demonstrate that the proposed FPMCAST algorithm significantly outperforms flooding and gossiping algorithms. Specially, the FPMCAST algorithm has longer network lifetime because the residual energy of each node consumes evenly.

• Journal of Animal Environmental Science
• /
• v.11 no.1
• /
• pp.11-16
• /
• 2005

The round bale wrappers are generally used for rice straw after the harvesting of low land rice by combine harvester. In this situation, the bale wrappers should be well adapted under the travelling over raised borders and temporary ditches in soft soil of narrow rice fields. The study was conducted to improve the performance of bale wrapper through the new design for compact size, lowered gravity center and lowered power consumption. The prototype of round bale wrapper had been designed and assembled to tractor with three point hitch mounted. The machine type is one roll driving system with one roll for rotating and one roll for wrapping. The driving torque and work performance of the machines were measured and analysed. The torque requirement of the prototype and conventional type was 6kgf-m and 12kgf-m, respectively. The prototype shaved less friction resistance between bale driving roll and round bale. and the power requirement can also be reduced from 12kgf-m in the conventional to 6kgf-m in the prototype. The work efficiency of the new bale wrapper was $45\%$ higher than the conventional wrapper, and the working cost of the prototype can be reduced $17\%$ than that of the conventional.

• Korean Journal of Food Science and Technology
• /
• v.45 no.1
• /
• pp.53-58
• /
• 2013

The effect of baking on the physicochemical and sensory properties was investigated using a model system of sponge cakes incorporated with pine leaf powder (PLP) as a value-added food ingredient. PLP was incorporated into cake batter at 5 levels (0, 2, 4, 6, and 8%, w/w) by adding an equivalent amount based on the weight of wheat flour. After appropriate mixing, sponge cakes were baked at $170^{\circ}C$ for 30 min in an oven. The baked cakes were cooled to room temperature for 1 h prior to all measurements. The pH, moisture content, specific volume, height, volume index, and symmetry index decreased significantly with the increase in PLP content (p<0.05). On the contrary, specific gravity of the batter and baking loss increased (p<0.05). The lightness of the cakes decreased, whereas redness increased significantly with the higher amount of PLP in the formulation (p<0.05). Hardness also increased significantly (p<0.05). Both total polyphenol content and DPPH (1,1-diphenyl-2-picryl hydrazyl) radical scavenging activity increased significantly by the addition of PLP (p<0.05). The consumer acceptance test indicated that the addition of PLP up to 4% did not cause a significant unfavorable effect on the consumer acceptances in all attributes. The sponge cakes with 2-4% PLP would be recommended with respect to the overall acceptance score while taking advantage of the functional properties of PLP without sacrificing the consumer acceptability.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.1
• /
• pp.16-24
• /
• 2021

This experimental study was conducted to evaluate the in-plane and out-of-plane seismic performances of an unreinforced masonry walls (URMs) strengthened with prestressed steel-bar truss systems developed in the present investigation. The truss systems were installed on both faces of the walls. All the wall specimens were subjected to lateral in-plane or out-of-plane cyclic loads at the fixed gravity stress of 0.25 MPa. The seismic performance of the strengthened specimens was compared to that measured in the counterpart URM. When compared with the lateral load-displacement curve of the URM, the strengthened walls exhibited the following improvements: 190% for initial stiffness, 180% for peak strength, 610% for accumulated energy dissipation capacity, and 510% for equivalent damping ratio under the in-plane state; the corresponding improvements under the out-of-plane state were 230% for initial stiffness, 190% for peak strength, 240% for accumulated energy dissipation capacity, and 120% for equivalent damping ratio, respectively. These results indicate that the developed technique is very promising in enhancing the overall seismic performance of URM.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.8
• /
• pp.531-540
• /
• 2022

In this paper, we present an algorithm that identifies artillery type and rapidly predicts the impact point based on the IMM filter. The ballistic trajectory equation is used as a system model, and three models with different ballistic coefficient values are used. Acceleration was divided into three components of gravity, air resistance, and lift. And lift acceleration was added as a new state variable. The kinematic condition that the velocity vector and lift acceleration are perpendicular was used as a pseudo-measurement value. The impact point was predicted based on the state variable estimated through the IMM filter and the ballistic coefficient of the model with the highest mode probability. Instead of the commonly used Runge-Kutta numerical integration for impact point prediction, a semi-analytic method was used to predict impact point with a small amount of calculation. Finally, a state variable initialization method using the least-square method was proposed. An integrated algorithm including artillery type identification, impact point prediction and initialization was presented, and the validity of the proposed method was verified through simulation.

• Korean Association of Arts Management
• /
• no.53
• /
• pp.101-125
• /
• 2020

This paper presents the problems and improvement methods in estimating demand and benefit, which have been controversial in the feasibility study of building cultural facilities. Although there are justifications for supplying cultural facilities by expanding leisure time and increasing income, the economic burden from the insolvent operation after construction is high. Feasibility studies can prevent these problems in advance. In order to estimate the demand for cultural facilities, similar facilities were selected and the gravity model was used to estimate the demand. In the future, it is necessary to prepare the criteria for setting the reference facility to increase the accuracy of the demand estimation. In addition, in the case of cultural facilities constructed through feasibility study, it is necessary to induce and enforce the disclosure of operational data and information, and to establish a database so that it can be used as a reference facility for demand estimation in future feasibility study on cultural facility. Accurate benefit estimation requires multiple CVM surveys. In addition to the current CVM survey, this paper suggest that supplementary online non-face-to-face surveys is considered. Furthermore, this research suggests that the use of video media for explanation of alternative materials for cultural facilities to be constructed because the WTP may be excessive due to lack of alternatives for survey respondents in the current CVM survey.