• 한국세라믹학회지
• /
• 제46권3호
• /
• pp.229-233
• /
• 2009

This study has focused on manufacturing technique of powder injection molding of watch case made from zirconia powder. A series of computer simulation process was applied to prediction of the flow pattern in the inside of the mould to clarifying the change of sintering shrinkage depended on flow direction. The material properties of melted feedstock inclusive of the PVT graph and thermal viscosity flowage properties were measured for obtaining the input data in computer simulation. Also, molding experiment was conducted and the results of experiment showed that good agreement with simulation results for flow pattern and weld line location. On the other hand, gravity and inertia effect have an influence on velocity of melt front because of high density of ceramic powder particles in powder injection molding against the polymer injection molding process. In the experiment, the position of melt front was compared with upper gate and lower gate position. The gravity and inertia effect could be confirmed in the experimental results.

• Wind and Structures
• /
• 제5권2_3_4호
• /
• pp.115-126
• /
• 2002

A mesoscale meteorological model is applied to simulate turbulent airflow and eddy shedding over the Isle of Arran, SW Scotland, UK. Under conditions of NW flow, the mountain ridge of Kintyre, located upwind of Arran, induces gravity waves that also affect the airflow over the island. The possibility to nest domains allows description of the airflow over Arran with a very high resolution grid, while also including the effects of the surrounding mainland of Scotland, in particular of the mountain ridge of Kintyre. Initialised with a stably stratified NW flow, the mesoscale model simulates quasi-stationary gravity waves over the island induced by Kintyre. Embedded in the larger scale wave trains there is continuous development of small-scale transient eddies, created at the Arran hill tops, that move downstream through the stationary wave field. Although the transient eddies are more frequently simulated on the northern island where the terrain is more pronounced, they are also produced over Tighvein, a hill of 458 m on the southern island where measurements of surface pressure and 2 m meteorological variables have been recorded at intermittent intervals between 1996 and 2000. Comparison between early observations and simulations so far show qualitatively good agreement. Overall the computations demonstrate that turbulent flow can be modelled with a horizontal resolution of 70 m, and describe turbulent eddy structure on wavelength of only a few hundred metres.

• 동력기계공학회지
• /
• 제5권1호
• /
• pp.64-72
• /
• 2001

According to the regulation of IMO, oil discharge from ships is allowed under 15ppm only and an oil filtering equipment is essential. However, for large ships using heavy fuel oil of over S.G 0.98 and viscosity 380cSt and system oil, it has been in difficulty to process with existing filtering type of oily water separator. A parallel plate type oily water separator which is one of gravity type separators can be used as an assistant equipment for the oil filtering system to meet the present IMO standard of 15 ppm, because it is an efficient method in dealing with a large amount of rich oil with high specific gravity. This work is focused on the fundamental investigation of the performance of the plate type oily water separator by visualization method and PIV(Particle Image Velocimetry) measurement to acquire multi-point velocity data simultaneously. The experimental results showed that the space of the plates acts a significant role in separating process and it was found that an important point to minimize a vortex flow is to flow a large amount of fluid in space of the plates in order to promote the efficiency of separation.

• 한국정밀공학회지
• /
• 제22권3호
• /
• pp.29-37
• /
• 2005

In this study, the control of the free surface deformation of a magnetic fluid for the change in electromagnetic force is discussed. The free surface of magnetic fluid is formed by the balance of surface force, gravity, pressure difference, magnetic normal pressure and magnetic body force. Magnetic fluid in characteristics of fluid adjusted to the opposite direction of the gravity direction. Thus, the device of a magnetic fluid proposed the complete zero-leakage sealing, oscillator for surface control, boundary layer control, MHD, flow control, flow using magnetic levitation system and surface actuator. This study show the deformation of surface rise due to the intensity of the magnetic field and possibility of two-dimensional control of magnetic fluid through the feedback data of hall sensor.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제13권4호
• /
• pp.206-216
• /
• 2005

Numerical analysis has been carried out to investigate laminar convective heat transfer at zero gravity in a tube for supercritical water near the thermodynamic critical point. Fluid flow and heat transfer are strongly coupled due to large variation of thermodynamic and transport properties such as density, specific heat, viscosity, and thermal conductivity near the critical point. Heat transfer characteristics in the developing region of the tube show transition behavior between liquid-like and gas-like phases with a peak in heat transfer coefficient distribution near the pseudo critical point. The peak of the heat transfer coefficient depends on pressure and wall heat flux rather than inlet temperature and Reynolds number. Results of the modeling provide convective heat transfer characteristics including velocity vectors, temperature, and the properties as well as the heat transfer coefficient. The effect of proximity on the critical point is considered and a heat transfer correlation is suggested for the peak of Nusselt number in the tube.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.194-198
• /
• 2006

In this study, numerical modeling was performed to analyze air flow including radiation heat transfer inside a small chamber. Characteristics of heat transfer between source plate and target through glass are investigated for various surface temperature of heat source plate with buoyancy effect due to gravity force. Conduction heat transfer through the glass is considered and heat source plate is assumed to be a black body. Target surface temperature is largely affected by the radiation heat transfer. It can also be seen that as the source temperature increases target surface is dominated by radiation rather than convective heat transfer by air.

• Journal of Chest Surgery
• /
• 제38권10호
• /
• pp.661-668
• /
• 2005

배경: 체외순환장치 중 막형산화기를 사용하는 인공심폐기나 생명구조장치(Extra-corporeal Life Support System; ECLS)는 혈액이 통과하기 위해 막형산화기 전방에 구동점프가 요구된다. 국내에서 개발된 박동식 생명구조장치(T-PLS)의 경우는 막형산화기가 두 개의 혈액주머니 사이에 위치하여 액츄에이터가 번갈아 까내는 구조로 되어 있다 저자 등은, 만일 저항이 낮은 gravity-flow hollow fiber 막형산화기를 사용한다면 두 개의 혈액주머니와 박동점프를 막형산화기 후방에 설치하는 것이 가능하며, 이러한 구조는 같은 펌프박동 조건에서 2배의 맥박수를 보장하므로 펌프박출량이 증가될 것으로 가정하였다. 본 실험은 한국형 생명구조장치의 회로구성을 최적화하기 위해 계획되었으며, 기존의 막형산화기를 사용한 직렬회로구조와 gravity-flow hollow fiber 막형산화기를 이용한 병렬회로 구조를 박동에너지와 펌프박출량을 이용하여 비교하였다. 대상 및 방법: 실험은 $35\~45kg$의 돼지 12마리에서 심실세동혈 심정지 모델을 만들었으며, T-PLS 회로구성 형태에 따라 두 군으로 나누었다. 직렬군은 두 개의 혈액주머니 중간에 기존 막형산화기를 직렬로 설치하였으며, 병렬군은 gravity-flow hollow fiber막형산화기 후방에 이중구동점프를 병렬로 설치하였다. 펌프박출량은 대동맥 도관에서 직접 혈류를 측정하였고, 등가압력에너지(EEP)는 실시간으로 컴퓨터에 저장된 펌프박출곡선과 하행대동맥 혈압곡선에서 계산하였다. 각 지표는 점프속도 30, 40, 50 BPM에서 매번 측정하였다. 결과: 두 군 모두 박동에너지 측면에서 충분한 박동성을 보여주었다. 점프속도 30, 40, 50 BPM에서 EEP와 평균동맥압의 변화율은 병렬군의 경우 $13.0\pm.7\%,\;12.0\pm1.9\%,\;and\;7.6\pm0.9\%$였으며, 직렬군의 경우 $22.5\pm2.4\%,\;23.2\pm1.9\%,\;and\;21.8\pm1.4\%$였다. 점프박출량의 경우는 점프속도 40, 50 BPM에서 병렬군의 경우 $3.1\pm0.2\;and\;3.7\pm0.2L/min$였으며, 직렬군의 경우 $2.2\pm0.1\;and\;2.5\pm0.1\;L/min$였다(p<0.05). 결론: 혈류 저항이 낮은 gravity-flow 막형산화기를 사용하여 T-PLS 구동점프를 병렬회로로 배치할 경우 효과적인 박동성은 유지하면서, 기존의 막형산화기를 이용한 직렬회로 구조에 비해 점프박출량을 증가시켰다.

• 한국측량학회지
• /
• 제37권6호
• /
• pp.417-426
• /
• 2019

이 연구에서는 미세먼지 시공간 변화 표현의 단점을 개선하고자 미세먼지를 흐름으로 시각화하였다. 일반적으로 미세먼지 흐름 시각화는 농도 분포와 바람장을 중첩해 표현하지만 도시 단위 이하 국지적 이동의 경우 바람과 미세먼지 이동이 다를 수 있으므로 바람장을 사용하는 것이 적합하지 않을 수 있다. 제시하는 시각화 방법론은 미세먼지 자료에서 직접 흐름 정보를 추출한다는 점에서 기존 연구와 차별성을 갖는다. 공간 상호작용을 설명하는 중력모델을 확장한 흐름 추출 방법을 미세먼지 자료에 적용하여 미세먼지 분포 변화에서 흐름 정보를 추출하였다. 이를 위해 공간보간법을 이용하여 미세먼지 분포도를 작성하였으며 추출된 미세먼지 흐름 정보를 물방울 모양의 움직이는 입자를 이용해 동적으로 시각화하였다. 산업 및 교통 활동이 시작하는 오전 5~7시 시간대를 대상으로 서울시 미세먼지 평균 흐름을 시각화하였으며 미세먼지 요인 중 하나인 교통정보와 연계하여 시각적으로 관련성을 분석하였다.

• 한국군사과학기술학회지
• /
• 제20권5호
• /
• pp.665-672
• /
• 2017

Supercavitation can be generated at relatively lower speeds by injecting compressed air behind the cavitator. As a result, an artificially created supercavity is deformed and its tail tends to rise due to gravitational effects. However, practical prediction of the artificial supercavity currently depends on empirical results. In this study, a mathematical model for the artificial supercavity under the gravity effect is proposed. Based on a boundary element method, geometric characteristics of the supercavity at different flow conditions are examined. The results were compared with an existing empirical formula and also experimental observations carried out at a cavitation tunnel of the Chungnam National University.

• Asian Journal of Business Environment
• /
• 제6권1호
• /
• pp.19-24
• /
• 2016

Purpose - This paper aims to find and analyze factors that determine the flows of bilateral foreign direct investment in intra-ASEAN. It specifically focuses on the dimension of macro-economic, natural resources, human resources, and the quality of governance. Research design, data, and methodology - Data were collected from 64 bilateral relations between ASEAN nations from 2002 to 2013. Panel gravity model was utilized to find factors that determine the flows of bilateral foreign direct investment. Results - Significant factors were identified that determine the flows of bilateral foreign direct investment: GDP home country, GDP host country, real interest rate, distance, and total natural resources rent. Unexpectedly, natural resources have a negative effect. Conclusions - In a situation of increasing the flow of FDI among the countries of ASEAN, the government should control the interest rates and maintain good relations with nearby countries. The negative effect of total natural resource rents implies that ASEAN countries should not depend on their natural resources to attract foreign investments.