• 제목/요약/키워드: Gravity Compensator

검색결과 20건 처리시간 0.021초

단일모드 광섬유Mach-Zehnder 간섭계의 안정화를 위한 위상 추적 궤환 보상기의 설계 (Design of Phase Tracking Feedback Compensator for Stabilization of Single Mode Fiber-Optic Mach-Zehnder Interferometer)

  • 이기완;홍봉식
    • 대한전자공학회논문지
    • /
    • 제26권12호
    • /
    • pp.2032-2038
    • /
    • 1989
  • Single mode optical fiber interferometeric sensors using phase tracking homodyne detection are typically susceptible to environmentally indured temperature fluctuations and other types of disturbances. A simple and effective phase tracking feedback electronic circuit for compensator is described to achieve stabilizing signal output, maximum sensitivity and linearity in the fiber optic Mach-Zehnder infterferometer in the presence of differential phase drift. The phase tracking range of the piezoelectric cyclinder in the reference arm is \ulcorner.7 \ulcornerad and the prabe mass about 1 gram in the sensing arm was used for measurements of the gravity acceleration.

  • PDF

Stability Analysis of Visual Servoing with Sliding-mode Estimation and Neural Compensation

  • Yu Wen
    • International Journal of Control, Automation, and Systems
    • /
    • 제4권5호
    • /
    • pp.545-558
    • /
    • 2006
  • In this paper, PD-like visual servoing is modified in two ways: a sliding-mode observer is applied to estimate the joint velocities, and a RBF neural network is used to compensate the unknown gravity and friction. Based on Lyapunov method and input--to-state stability theory, we prove that PD-like visual servoing with the sliding mode observer and the neuro compensator is robust stable when the gain of the PD controller is bigger than the upper bounds of the uncertainties. Several simulations are presented to support the theory results.

SVC를 포함한 전력시스템의 안정도 향상을 위한 최적 퍼지-PI 제어기의 설계 (A Design of Optimal Fuzzy-PI Controller to Improve System Stability of Power System with Static VAR Compensator)

  • 김해재;주석민
    • 전기학회논문지P
    • /
    • 제53권3호
    • /
    • pp.122-128
    • /
    • 2004
  • This paper presents a control approach for designing a fuzzy-PI controller for a synchronous generator excitation and SVC system. A combination of thyristor-controlled reactors and fixed capacitors(TCR-FC) type SVC is recognized as having the most flexible control and high speed response, which has been widely utilized in power systems, is considered and designed to improve the response of a synchronous generator, as well as controlling the system voltage. A Fuzzy-PI controller for SVC system was proposed in this paper. The PI gain parameters of the proposed Fuzzy-PI controller which is a special type of PI ones are self-tuned by fuzzy inference technique. It is natural that the fuzzy inference technique should be based on humans intuitions and empirical knowledge. Nonetheless, the conventional ones were not so. Therefore, In this paper, the fuzzy inference technique of PI gains using MMGM(Min Max Gravity Method) which is very similar to humans inference procedures, was presented and applied to the SVC system. The system dynamic responses are examined after applying all small disturbance condition.

중력보상장치 설계계수를 고려한 고가반 로봇설계에 관한 연구 (Study on Design of Heavy Payload Robot Considering Design Factor of Gravity Compensator)

  • 이도승;이호수;표상훈;윤정원;류성기
    • 한국기계가공학회지
    • /
    • 제18권5호
    • /
    • pp.23-28
    • /
    • 2019
  • In recent years, medium- to large-scale transportation machinery and machine tool manufacturing process lines have shown a trend toward centralization, softening, lightening, and slimming to reduce costs and increase productivity. This has increased the demand for vertical articulated robots. When developing and introducing a heavy weight-handling robot that can be easily applied to existing production lines, it is expected to have a great effect in securing industrial competitiveness by solving industrial issues such as the decreased productivity and increased risk of accidents due to work involving heavy lifting. In this study, we design a 6-axis robot mechanism with a heavy load-handling capacity of 700kg or more for large-sized materials of various types supplied in small quantities.

유연한 로보트 매니퓰레이터의 적응 제어기 설계 (Adaptive Controller Design of the Flexible Robotic Manipulator)

  • 김승록;박종국
    • 전자공학회논문지B
    • /
    • 제29B권3호
    • /
    • pp.25-34
    • /
    • 1992
  • This paper proposes a Self-Tuning control algorithm for tracking the reference trajectory by measuring the end-point of robot manipulator whose links are light and flexible, and the performance of it is tested through the computer simulation. As an object of system, a flexible robot manipulator with two-links is considered and an assumed mode shape method including gravity force is adopted to analyze the vibration modes for each links and dynamics equation is derived. The controller is designed as a combined form which consists of dynamic feedforward compensator and self-tuning feedback controller. The one supplies nominal torque and the other supplies variational torque to manipulator. Apart from the, K-incremental predictor is also proposed in order to eliminate the offset error. and it shows that the result of simulation adapted well to load change and rapid velocity.

  • PDF

상부 시변 부하를 갖는 2축 도립진자의 위치 제어 (Position Control of the Two Links Inverted Pendulum with a Time Varying Load on the Top)

  • 이건영
    • 대한전기학회논문지:전력기술부문A
    • /
    • 제48권9호
    • /
    • pp.1147-1153
    • /
    • 1999
  • The attitude control of a double inverted pendulum with a periodical disturbance at link top is dealt in this paper. The proposed system is consisted of the double inverted pendulum and a disturbing link; a triple inverted pendulum with two motors. The lower link is hinged on the plate to free for rotation in the vertical plane. The upper link is connected to the lower link through a DC motor. The DC motor is used to control the posture of the pendulum by adjusting the position of the upper link. The periodical disturbance can be generated by the additional like attached at the end of link 2 through another DC motor, which is the modeling of a posture for a biped supporting with one leg. The motor for the joint simulates the knee joint(or hip joint) and the disturbance for the legs moving in air. The algorithm for controlling the proposed inverted pendulum which is regarded as a virtual double inverted pendulum with a periodic disturbance, is consisted of a state feedback control and a fuzzy logic controller connected in parallel. The fuzzy controller keeps the center of gravity of the biped within the specified range through the nonlinear feedback compensator. The state feedback control takes over the role to maintain a desired posture regardless the disturbance at the link top. Simulations with a mathematical model and experiments are conducted to show the validity of the proposed controller.

  • PDF

고가반 하중 이송가능한 경량 로봇 매니퓰레이터의 구조해석 연구 (Structure Analysis of the Light Robot Manipulator Capable of Handling Heavy Payloads)

  • 최형식;조종래;허재관;전지광
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제34권2호
    • /
    • pp.318-324
    • /
    • 2010
  • 본 논문에서는 새로운 구조의 6축 다관절 로봇 매니퓰레이터의 경량화와 토크성능을 높이기 위하여 어깨관절부위에 중력보상기를 설계하고 적용하였다. 또한, 매니퓰레이터의 기구학 및 역기구학 해석을 하였다. 자체 중량 30Kg의 경량이면서도 25Kg 고가반하중 인 우수한 성능을 구비할 수 있도록 매니퓰레이터의 링크 구조에 대한 FEM 해석을 수행하였다. FEM 해석을 통하여 로봇 매니퓰레이터의 굽힘이나 파단에 대한 안정성을 확인하였다.

주기적인 상부 외란이 인가되는 2축 도립 진자의 자세 제어 (The Attitude Control of The Double Inverted Pendulum with Periodic Upper Disturbance)

  • 남노현;이건영
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1998년도 하계학술대회 논문집 G
    • /
    • pp.2309-2311
    • /
    • 1998
  • The attitude control of a double inverted pendulum with a periodical disturbance at link top is dealt in this paper. The proposed system is consisted of the double inverted pendulum and a disturbance link. The lower link is hinged on the plate to free for rotation in the vertical plane. The upper link is connected to the lower link through a DC motor. The DC motor is used to control the posture of the pendulum by adjusting the position of the upper link. The periodical disturbance can be generated by the additional link attached at the end of link 2 through another DC motor, which is the modeling of a posture for a biped supporting with one leg. The motor for the joint simulates the knee joint(or hip joint) and the disturbance for the legs moving in air. The algorithm for controlling a proposed inverted pendulum is consisted of a state feedback control and a fuzzy logic controller. The fuzzy controller keeps the center of gravity of the biped within the specified range through the nonlinear feedback compensator. The state feedback control takes over the role to maintain a desired posture regardless the disturbance at the link top. In these case, the change of the angle and COG of an upper link is compensated with on-line. Simulations with a mathematical model are conducted to show the validity of the proposed controller.

  • PDF

퍼지-PI 제어기를 이용하여 정지형 무효전력 보상기를 포함한 동기 발전기의 안정도 개선에 관한 연구 (A Study on Damping Improvement of a Synchronous Generator with Static VAR Compensator using a Fuzzy-PI Controller)

  • 주석민;허동렬;김상효;정동일;정형환
    • 조명전기설비학회논문지
    • /
    • 제15권3호
    • /
    • pp.57-66
    • /
    • 2001
  • 본 논문에서는 전력계통의 안정도를 향상시키기 위하여 동기 발전기와 정지형 무효전력 보상기예 대한 퍼지-PI 제어기를 설계하기 위한 제어 기법을 설명하였다. 정지형 무효전력 보상기는 고정된 용량의 커패시터와 싸이리스터 제어에 의하여 용량이 가변되는 인덕터가 병렬로 연결된 구조를 가지고 있으며, 시스템 전압을 제어할 뿐만 아니라 동기 발전기의 제동을 개선하기 위해 설계되었다. 본 논문에서 제안한 SVC 계통의 퍼지-PI 제어기의 파라미터는 퍼지 추론 기법에 의해 자동 동조되어진다. 퍼지 추론 기법은 일반적인 기법과는 달리 인간의 경험과 전문가의 지식을 제어 규칙으로 제어 동작을 결정하였다. 그리하여 인간의 추론 과정과 매우 유사한 MMGM을 이용하여 PI 이득의 퍼지 추론 기법을 SVC 계통에 적용하여 설명하였다. 제안된 방법의 강인성을 입증하기 위해 중부하시, 정상부하시 및 경부하시에 초기 전력을 변동시킨 경우에 대하여 시스템의 회전자각, 각속도 편차 특성 및 단자전압의 동특성을 고찰하여 기존의 전력시스템안정화장치보다 응답특성이 우수함을 보였다.

  • PDF

유방암 PET-CT 검사에서 Prone(복와위)자세의 유용성 평가 (Usefulness of Prone Position on PET-CT in Breast Cancer)

  • 박훈희;김세영;김정열;박민수;임한상;정석;강천구;김재삼;이창호
    • 핵의학기술
    • /
    • 제12권1호
    • /
    • pp.44-48
    • /
    • 2008
  • 유방암은 FDG PET-CT에서 예민도는 80~96%, 특이도는 75~95% 정도이며, 유방촬영(mammography) 소견상 판단이 어려운 수진자에게 매우 유용하며, 검진으로서의 조기 암 검출을 충분히 기대할 수 있다. PET-CT에서 대부분의 검사는 앙와위(supine position)으로 검사되어 전신검사(whole body scan)에서 원형으로부터 변형된 유방영상을 획득된다. 반면에 보정구를 이용하여 복와위(prone position)으로 영상을 획득할 경우, 유방을 중력에 의존하여 보다 원형에 가깝게 표현함으로써 영상의 진단가치를 높일 수 있기에 그 유용성을 평가하였다. 유방암으로 의심되거나 확진 된 여성 환자 30명을 대상으로 하였으며, $^{18}F$-FDG 주사한 뒤 60분 후 supine position으로 whole body PET-CT scan 시행 후, 보정구를 이용하여 prone position으로 병변에 대한 추가검사(lesional scan)를 시행하였다. 각각 획득된 영상은 핵의학과 의사로부터 blind test를 하였고, PET-CT 영상의 SUV를 측정하여 분석하였다. 30명 중 27명의 환자에게서 prone자세가 진단 용이성과 정확한 판별률이 높았으며, 나머지 3명의 경우는 병소가 1 cm 이하의 크기로 인하여, MRI상에는 나타났지만 PET-CT에서는 진단에 의미있는 관찰을 할 수 없었다. supine position과 비교하여 prone position은 구조물의 중력에 의한 변형수치가 낮아, 병변의 구별이 곤란한 경우 명확하게 감별되었다. 각 자세에서 SUV분석은 유의수준 0.004로 유의하였다. Supine position을 통한 PET-CT 전신검사 후의 보정구를 이용한 prone position로 병변에 대한 lesional scan은 두 자세의 비교가 모두 가능하였으며, 경우에 따라 결정적으로 진단에 영향을 주었다. 두 가지 자세의 영상비교에 있어 prone position이 원발성(primary) 병변의 진단은 물론, 미세전이(micrometastasis)의 검출이 가능하였다. 이러한 prone position을 기반으로 구조적인 문제를 정량적 분석과 함께 극복한다면 병변의 진단에 있어 보다 유용한 진단적 정보를 얻을 수 있으리라 사료된다.

  • PDF