• 컴퓨터교육학회논문지
• /
• 제10권4호
• /
• pp.51-59
• /
• 2007

컴퓨터를 이용한 수학교육에 있어서 컴퓨터의 활용은 아직 빈약한 수준이다. 이는 수학교육에 있어서 학생들의 컴퓨터와 상호작용을 통한 능동적인 수업참여를 지원해줄 다양하고 효과적인 수학교육 프로그램과 콘텐트들이 부족하기 때문이다. 이를 해결하기 위해서 수학과의 함수 학습을 위한 그래픽 컴포넌트를 설계하고 구현한다. 중고교 수학교육과정을 분석하여 그래픽 컴포넌트에서 지원할 그래픽 개체와 함수를 식별하였으며, 식별된 개체와 함수를 2차원 3차원 형식으로 화면에 그려주는 기능을 설계 및 구현하였다. 또한 간단한 스크립트 언어를 이용하여 컴포넌트의 기능을 호출하기 때문에 재사용성과 확장성이 높다. 본 컴포넌트를 활용함으로써, 다양한 함수들을 화면에 표현하는 기능이 필요한 수학교육 프로그램과 교육 콘텐트를 손쉽게 제작할 수 있다.

• International Journal of Control, Automation, and Systems
• /
• 제3권3호
• /
• pp.493-501
• /
• 2005

A power plant simulation tool ('PowerSim') has been developed with 10 years experience from the development of a plant simulator for efficient modeling of a power plant. PowerSim is the first developed tool in Korea for plant simulation with various plant component models, instructor station function and the Graphic Model Builder (GMB). PowerSim is composed of a graphic editor using general purpose design software, a netlist converter, component models, the scheduler, Instructor Station and an executive. The graphic editor generates a netlist that shows the connection status of the various plant components from the Simdiagram, which is drawn by Icon Drag method supported by GUI environment of the PowerSim. Netlist Converter normalizes the connection status of the components. Scheduler makes scheduling for the execution of the device models according to the netlist. Therefore, the user makes Simdiagram based on the plant Pipe and Instrument Drawing (P&ID) and inputs the plant data for automatic simulating execution. This paper introduces Graphic Model Builder (GMB), instructor station, executive and the detailed introduction of thermal-hydraulic modeling. This paper will also introduce basic ideas on how the simulation Diagram, based on netlist generated from general purpose design software, is made and how the system is organized. The developed tool has been verified through the simulation of a real power plant.

• 한국인쇄학회지
• /
• 제16권3호
• /
• pp.157-170
• /
• 1998

To investigate the most effective way of cellulase utilization on paper making process and the systematic way of how to combine its components for better use, purified two major cellulase were applied to bleached kraft pulp at various dosage in the refining process and estimated the synergism effect of each components in the characteristics of papermaking fiber. freeness was not changed by $C_1$ Component dosage but strongly increased by Cx Component dosage. Drop in fiber viscosity, increase in WQV, fiber shortening and fine generation was strongly influenced by Cx Component, it seems to be that Cx Component works a hydrogenate that breaks hydrogen bonding in fiber and enhances pooling effect of fiber. $C_1$ Component was little influenced these characteristics of fiber but considered to help to make fiber surface smooth.

• 한국정보통신학회논문지
• /
• 제12권9호
• /
• pp.1547-1553
• /
• 2008

본 논문은 간소화된 주성분 벡터를 이용한 벡터 그래픽 캐릭터의 다양한 얼굴 표정 생성 방법을 제안한다. 먼저 Russell의 내적 정서 상태에 기반하여 재정의된 벡터 그래픽 캐릭터들의 9가지 표정에 대해 주성분 분석을 수행한다. 이를 통해 캐릭터의 얼굴 특성과 표정에 주된 영향을 미치는 주성분 벡터를 찾아내고, 간소화된 주성분 벡터로부터 얼굴 표정을 생성한다. 또한 캐릭터의 특성과 표정의 가중치 값을 보간함으로써 자연스러운 중간 캐릭터 및 표정을 생성한다. 이는 얼굴 애니메이션에서 종래의 키프레임 저장 공간을 상당히 줄일 수 있으며, 적은 계산량으로 중간 표정을 생성할 수 있다. 이에 실시간 제어를 요구하는 웹/모바일 서비스, 게임 등에서 캐릭터 생성 시스템의 성능을 상당히 개선할 수 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전력기술부문
• /
• pp.220-222
• /
• 2004

In the paper architecture of load flow under graphic interface we mentioned that the define of graphic interface and the way of system modeling. In the view point of engineering, domain define is the step of process which is seek out the general solution. This is a base of program's structure. When making a relationship inner component, relevance and restriction are affected by data type and etc. In this process logical data is realized as a symbol. And system configuration decide that main function and extension by the analysis user's demand and requirements. Specially engineering analysis software has accuracy also through the numerical method. To represent this wee need more powerful graphical component. This helps user's accessibility. We can combine 10, numerical library and graphical component as a system element by domain definition. In this paper we will materialize as a step of implementation and decide a direction of programming. In conclusion we will see the analysis software's necessary function to make a better.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 2004년도 춘계학술대회 논문집
• /
• pp.136-140
• /
• 2004

A power-plant simulation tool has been developed for training the plant operators and testing a plant control system. The simulation tool is composed of a graphic editor, a component model builder and a system simulation solver. Such new programing techniques as object-oriented modeling and GUI(Graphical User Interface) are employed in developing the simulation tool. The graphic editor is based on the OpenGL library for effective implementation of GUI while the component model builder is based on object-oriented programming for efficient generalization of component models. The developed tool has been verified through the simulation of a real power plant.

• 한국인쇄학회지
• /
• 제10권1호
• /
• pp.23-33
• /
• 1992

The negative pressure distribution curves of the exit of printing nip were obtained by the transducer type tackometer. As the results, found that the elasticity of rubber rollers and pastic viscosity affect to the maximum negative and positive pressure but, the gap of the printing nip didn`t affects to the tack values of ink and ink film thickness. Ink spritting is accured by negative pressure and inks viscoelasticity. And the tack value is affect by properties of the vehicle component in the inks.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1559-1563
• /
• 2007

This paper presents a virtual machine design simulation program. Kinematics of various mechanisms can be modeled with 3 dimensional geometry and actuators. CAD data for any machine component can be easily imported in STL format. Machine components are assembled with kinematic joints simply by drag and drop function in virtual graphic simulator. Interference and collision of any component with other components can be identified during the motion simulation. Graphic user interface program is developed using Microsoft Direct X code. A precision micro stage system is demonstrated with the proposed virtual machine design simulator.

• 한국인쇄학회지
• /
• 제22권2호
• /
• pp.37-54
• /
• 2004

IPNs have interpenetrating motion and phase separation behavior of independent polymers, respectively, and also these are affected by the physical interaction of polymer components. First of all, 2- and 3-component IPNs based on PU are prepared by combination with two or three components of PU, PMMA, PS and epoxy resin. And then the entire physical properties concerning morphological and mechanical behaviors of these IPNs are measured by employing FT-IR, SEM, Rheovibron, and DSC, etc. Compared with pure component, Tg's of IPN are shifted to higher temperature in all IPN kinds, and these are considered in attribution to internal movement of glass transition temperature or partial phenomenon of interpenetration. Rheovibron measurement results in a broader distribution with peaks of tan${\delta}$ or E", and this morphologically represents a medium degree of partially mixed IPNs in confirmation of SEM photographs.

• 한국인쇄학회지
• /
• 제28권1호
• /
• pp.51-63
• /
• 2010

Ink-jet is part of the non impact printing that shooting the ink drop from the nozzle to paper. It is very silence and express good color. There are two types of printing that continuous and drop on demand. But drop on demand process is becoming the mainstream. these days, LCD, PDP is passed more than semiconductor industry. And we expect organic EL, FED as a next display. But product equipment, main component and technology have a gap between an advanced country and us nevertheless physical development. Expecially, previous process part is depended on imports. Ink-jet printing technology that there isn't complicated photo lithography process is attracted, so ink-jet printing resolution is more embossed. But there were not many of ink-jet resolution thesis but ink-jet head or nozzle. Because, to out of the ink from the nozzle is unseeable and hard to experiment. Therefore this thesis was experimented and simulated how can ink-jet printer improved resolution by flow-3d simulation package program.