• Journal of Environmental Science International
• /
• v.19 no.1
• /
• pp.39-45
• /
• 2010

When the Juam multipurpose dam which is connected with existing large water supply facilities is finished, water environment is changed from stream to lake. The changed quality of water should be examined. In this study, the result of water quality forecasting is analysed and an effective management plan of water quality is presented. Tn this study, the WASPS model that is a dynamic water quality simulation model was selected to forecast the water quality. This model forecasts movement of change of pollutants. For an application of the model, the subject areas were divided into seventeen sub-areas by considering change temperature depending measuring points and on depth of water. Meteorological data collected by the meteorological observatory and data about quality measured by the Korea Water Resources Development Corporation were used for an operation of the model. As a result of quality examination through quality data and estimated pollutant loading, the water quality environment criterion was grade II and the nutritive condition was measured as meso-graphic grade. In this study, an effective management was planned to improve water quality by reducing pollution load. According to the result of examination, when more than 30% of BOD was reduced it was recorded that the environment standard of water quality was improved to the second grade.

• Journal of the Korean Institute of Navigation
• /
• v.20 no.2
• /
• pp.1-13
• /
• 1996

Most of the ShipHandling Simulators of full-mission-bridge system need vast area to install and even PC-based maneuvering simulators are often equipped with Steering Wheel or Engine Telegraphe etc. of data input interface, which necessarily makes the user face with excessive financial burden. These have been one of the obstacles for the officers, captains, pilots and students in access to maneuvering simulation whenever they want to try it in advance prior to actual ship maneuvering. Subsequently, all the officers and captains come to have little chances to train themselves until they arualified as a pilot after a long period of time of realship maneuvering practice on board, which means they have to control they have to control their own ship at sea without clear understanding on her maneuverability when they are forced to do it on the way. And these lack of capability for maneuvering have used so often to result in marine casualties of collision with other ships or pier facilities while maneuvering in harbor. To prevent those accidents by means of enhancing their maneuvering ability, PC-based DeskTop Simulator that allows anyong to access readily at anytime is needed and in conformation to such demand this simulator has been developed. The Software this simulator written in Turbo Pascal Ver. 5.0 has adopted MMG mathmatical model theoretically in part and also it was designed to make it possible that all numeric data inputs and outputs with graphic presentation for maneuvering operation be carried out just only with keyboard and monitor console. With the Simulation software, all the officers, captains, pilots and even students who has a proper computer at hand are expected to be able to make an attempt to simulate the maneuvering of their ownship or any other types of them at any port in which they want to do it.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.3
• /
• pp.581-589
• /
• 2008

The goal of a simulator is to provide for the testing of new technologies and to facilitate the eventual transfer of these technologies to the applications. In the Development Step, Simulation can provide a cost effective alternative to expensive and hazardous field testing. In this paper, a 3D simulator is developed to test UUV navigation system bated on RVC model. The simulation system consists of a environment manager, objects and a 3D viewer. Objects are modeling all physical elements such as map, obstacle and UUV which reside in a underwater environment. Those objects are created and initialized by environment manager. The environment manager plays the role of intermediator which allows created objects to interact with each other, and transmits information on the objects to 3D viewer. The 3D viewer analyzes the received information and visualizes 3D graphic by using OpenGL primitives.

• Progress in Medical Physics
• /
• v.10 no.2
• /
• pp.63-71
• /
• 1999

For the purpose of utilization in 3-D conformal radiotherapy and whole body radiosurgery, the Whole Body 3-Dimensional Topographic Radiation Therapy System has been developed. Whole body frame was constructed in order to be installed on the couch. Radiopaque catheters were engraved on it for the dedicated coordinate system and a MeV-Green immobilizer was used for the patient setup by the help of side panels and plastic rods. By designing and constructing the whole body frame in this way, geometrical limitation to the gantry rotation in 3-D conformal radiotherapy could be minimized and problem which radiation transmission may be altered in particular incident angles was solved. By analyzing CT images containing information of patient setup with respect to the whole body frame, localization and coordination of the target is performed so that patient setup error may be eliminated between simulation and treatment. For the verification of setup, the change of patient positioning is detected and adjusted in order to minimize the setup error by means of comparison of the body outlines using 3 CCTV cameras. To enhance efficiency of treatment procedure, this work can be done in real time by watching the change of patient setup through the monitor. The method of image subtraction in IDL (Interactive Data Language) was used to visualize the change of patient setup. Rotating X-ray system was constructed for detecting target movement due to internal organ motion. Landmark screws were implanted either on the bones around target or inside target, and variation of target location with respect to markers may be visualized in order to minimize internal setup error through the anterior and the lateral image information taken from rotating X-ray system. For CT simulation, simulation software was developed using IDL on GUI(Graphic User Interface) basis for PC and includes functions of graphic handling, editing and data acquisition of images of internal organs as well as target for the preparation of treatment planning.

• Archives of design research
• /
• v.20 no.3 s.71
• /
• pp.119-128
• /
• 2007

With the development of digital technologies, CAID became an essential part in the industrial design process. Creating photo-realistic images from a virtual scene with 3D models is one of the specialized task for CAID users. This task requires a complex interface of setting the positions and the parameters of camera and lights for optimal rendering results. However, the user interface of existing CAID tools are not simple for designers because the task is mostly accomplished in a parameter setting dialogue window. This research address this interface issues, in particular the issues related to lighting, by developing and evaluating TLS(Tangible Lighting Studio) that uses Augmented Reality and Tangible User Interface. The interface of positioning objects and setting parameters become tangible and distributed in the workspace to support more intuitive rendering task. TLS consists of markers, and physical controller, and a see-through HMD(Head Mounted Display). The user can directly control the lighting parameters in the AR workspace. In the evaluation experiment, TLS provide higher effectiveness, efficiency and user satisfaction compared to existing GUI(Graphic User Interface) method. It is expected that the application of TLS can be expanded to photography education and architecture simulation.

• Science of Emotion and Sensibility
• /
• v.22 no.3
• /
• pp.47-54
• /
• 2019

We examined previous studies of the correlation analysis of heart rate variability as a method to reduce the stress caused by outside noise during driving, and we investigated whether there are electrocardiographic changes when drivers play music, which provides a stable sound source amid the noise. Because the number of cars increases every year, drivers and passengers show an increase in stress caused by outside noise. The stress from outside noise while a person is driving can cause several disorders, such as anxiety, immunosuppression, depression, and heart disease. Subjects in this study operated a vehicle simulator to reduce the stress from outside noise and were given different auditory stimuli, and we studied the drivers' responses to the stimuli. Repeated-measures analysis of variance revealed a significant differences between subjects exposed to different auditory stimuli (ρ < 0.05). Through post hoc analyses, we examined these differences. We found significant differences between factor 1 (stability) and factor 2 (simulation driving), between factor 1 (stability) and factor 3 (driving + police siren), and between factor 1 (stability) and factor 4 (driving + police siren + music). In addition, the factor that produced the highest level of sympathetic nervous system activity was factor 4 (driving + police siren + music), followed by factor 3 (driving + police siren), factor 2 (driving), and factor 1 (stability). In conclusion, even when a police siren was heard during driving, there were no significant differences on electrocardiograms (ECGs). In addition, even when the siren was heard over the music, there was no difference on the ECGs (ρ < 0.01). In future studies, investigators should determine which types of music help stabilize the heart rate during driving.

• Korean Institute of Interior Design Journal
• /
• v.23 no.6
• /
• pp.150-159
• /
• 2014

Recently, violent crimes against the socially disadvantaged have become more frequent and became serious social issues. In addition, compared to the past, the crime methods have become more diverse and intricate, which results in larger damages. For those reasons, the public are increasingly concerned about crimes and it is detrimental to the quality of life in general. Currently, safety in alleys and other residential spaces is protected only by mechanical and managerial functions such as CCTV and police patrol. Safe environment from crimes can be achieved only if there are environmental and spatial plans such as CPTED (Crime Prevention through Environmental Design) principles. The purpose of this study is to propose a direction for spatial planning that can prevent crimes through environmental elements, by researching the spatial planning and current status of alleys and residential spaces from the viewpoint of CPTED. To do so, first, a review checklist was created based on five principles of CPTED and field surveys were conducted on the northern districts of Busan with high crime rates. Second, the problems were analyzed through the field surveys and checklist was classified based on five principles of CPTED to propose improvements for each item. Also, a computer graphic simulation was used to suggest a design proposal. We expect that the application of the basic environmental design principles and guidelines for CPTED will have the effect of creating crime-free and safe spaces in alleys and residential environment.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2508-2513
• /
• 2003

This paper presents a nuclear steam generator tube inspection/maintenance robot system. The robot assists in automatic non-destructive testing and the repair of nuclear steam generator tubes welded into a thick tube sheet that caps a hemispherical or quarter-sphere plenum which is a high-radiation area. For easy carriage and installation, the robot system consists of three separable parts: a manipulator, a water-chamber entering and leaving device for the manipulator and a manipulator base pose adjusting device. A software program to control and manage the robotic system has been developed on the NT based OS to increase the usability. The software program provides a robot installation function, a robot calibration function, a managing and arranging function for the eddy-current test, a real time 3-D graphic simulation function which offers remote reality to operators and so on. The image information acquired from the camera attached to the end-effecter is used to calibrate the end-effecter pose error and the time-delayed control algorithm is applied to calculate the optimal PID gain of the position controller. The developed robotic system has been tested in the Ulchin NPP type steam generator mockup in a laboratory.

• Journal of Internet Computing and Services
• /
• v.6 no.1
• /
• pp.27-38
• /
• 2005

Recently, the rapidly development of computing environments and the spread of Internet make possible to obtain and use of information easily. Immediately, by opposition function the Hacker's unlawful intrusion and threats rise for network environments as time goes on. Specially, the internet consists of Unix and TCP/IP had many vulnerability. the security techniques of authentication and access controls cannot adequate to solve security problem, thus IDS developed with 2nd defence line. In this paper, intrusion detection method using Bayesian Networks estimated probability values of behavior contexts based on Bayes theory. The contexts of behaviors or events represents Bayesian Networks of graphic types. We profiled concisely normal behaviors using behavior context. And this method be able to detect new intrusions or modificated intrusions. We had simulation using DARPA 2000 Intrusion Data.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.2
• /
• pp.214-227
• /
• 2003

Developing an application, it is difficult to catch an exact requirement with the conventional text-based method. It has also problems in verification and analysis at each developing stage. Therefore, if an adjustment is required with an error and change of requirement, a bad effect happen in the whole system. In this case, it also affect adversely on the developing cost and period. Meanwhile, if an analysis or verification is performed, the possibility of an error frequency reduces. Thus, not only is it easier to correct the error but also add an new requirement. This thesis embody a TCP/IP congestion control algorithm with SDL which provides automatically graphic interface, verification and analysis to each developing stage. Using SDL gave a clear representation embodiment in each developing stage and easiness of adjustment due to changing requirements or correcting errors. In addition, the stages of protocol have been certified in a simulation by verification of MSC and the results showed a possibility of developing a better TCP/IP protocol.