• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.195-197
• /
• 2006

In this paper, an interface unit is designed to efficiently monitor transmission data in Controller Area Network(CAN)-based control systems. The CAN uses a serial multi master communication protocol that efficiently supports distributed real-time control with a very high level of data integrity, and communication speeds of up to 1Mbps. The interface unit is composed of a DSP controller which collects data on the CAN bus and transfers data to a personal computer via serial communication to save and display of interesting signals. The experimental system consists of three DSP controllers which represent electronic control units of a vehicle, an interface unit for analysing the data on the bus, and a graphic monitoring program coded on the Windows platform. The validity and the effectiveness of the proposed simple type of CAN interface unit are shown through the experimental results.

• 전기학회논문지
• /
• 제65권6호
• /
• pp.934-939
• /
• 2016

This paper made short-term electric load forecasting by using temperature data at three-hour intervals (9am, 12pm, 3pm, and 6pm) provided by the Korea Meteorological Administration (KMA). In addition, the electric power pattern was created using existing electric power data, and temperature sensitivity was derived using temperature and electric power data. We made power load forecasting program using LabVIEW, a graphic language.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2011년 춘계학술대회논문집
• /
• pp.194-198
• /
• 2011

In this study, an efficient algorithm for Delaunay triangulation of a number of points which can be used on a GPU-based parallel computation is studied The developed algorithm is programmed using CUDA library. and the program takes full advantage of parallel computation which are concurrently performed on each of the threads on GPU. The results of partitioned triangulation collected from the GPU computation requires proper stitching between neighboring partitions and calculation of connectivities among triangular cells on CPU In this study, the effect of number of threads on the efficiency and total duration for Delaunay grid generation is studied. And it is also shown that GPU computing using CUDA for Delaunay grid generation is feasible and it saves total time required for the triangulation of the large number points compared to the sequential CPU-based triangulation programs.

• Composites Research
• /
• 제15권1호
• /
• pp.9-20
• /
• 2002

본 연구에서는 유한요소해석을 이용하여 필라멘트 와인딩된 복합재 압력탱크의 설계방법을 정립하였다. 하중을 분담하는 금속재 라이너의 유무에 따라서 각각 설계를 수행하였다. 그리고, 반복적인 설계의 효율을 높이기 위하여 상용프로그램 ABAQUS와 연계된 유한요소해석 전처리 전용 그래픽 유저 인터페이스 프로그램을 구성하여 사용하였다. 또한, 금속재 탱크를 복합재 탱크로 대체하기 위한 초기 설계 과정을 정립하고 대체율을 정의하였으며, 주어진 요구조건에 따라 설계를 수행해 봄으로써 적합한 대체율 및 설계 모델을 제안하였다.

• 한국공작기계학회논문집
• /
• 제11권3호
• /
• pp.21-27
• /
• 2002

In this paper, we have developed a Widows 98 version Off-Line Programming System which can simulate a Robot model in 3D Graphics space. The SCARA robot with four joints (FARA SM5)was adopted as an objective model. Forward kinematics, inverse kinematics and robot dynamics modeling were included in the developed program. The interface between users and the OLP system in the Widows 98's GUI environment was also studied. The developing language is Microsoft Visual C++. Graphic 1ibraries, OpenGL, by silicon Graphics, Inc. were utilized for 3D Graphics.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.432-432
• /
• 2000

The above-Knee Prosthesis has been used by the handicapped person and become a important part of their life. But uniform above-knee prosthesis only increases inconvenience And so the tool that can estimate and help to design of suitable prosthesis for user need to be developed. The simulator developed in this research is composed of two part. One is hardware that can realize various walking motions. The other is software that can display and analyze the results of walking mot ion. Three motors constitute hardware of Simulator. Two motors are used to realize heap motion that need two degree of freedom and the rest one used to realize swing motion. Software of Simulator display results of three motor trajectories and walking mot ion of hardware using computer graphic. Therefore, The simulator developed in this research which is able to realize human gait and results are analyzed through simulation program at PC will be some help to design and produce of prosthesis suitable to user.

• 한국정밀공학회지
• /
• 제13권8호
• /
• pp.40-51
• /
• 1996

This paper describes some research works of computer-aided design of blanking and piercing progressive die for stator and rotor parts. An approach to the system is based on knowledge based rules. The deveolped system is composed of six modules such as main program, input and shape treatment, production feasibility check, strip layout, die layout and drawing edit module. Using this system, design parameters ( geometric shapes, die and punch dimensions and dimensions of tool elements) are determined and output is gen- erated in graphic from. Knowledges for tool design are extracted from the plasticity theories, handbooks, relevant references and empirical know-hows of experts in blkanking companies. The developed system provides powerful capabilities for process planning and die design of stator and rotor parts.

• 한국정밀공학회지
• /
• 제13권1호
• /
• pp.29-37
• /
• 1996

In this study, PC controlled CNC automatic cutting system is developed. Technological introduction of the control process and the computer programming has made possible not only the automatic control for cutting processing unit but also the easy-to-use graphic software that enables the cutting process. This program involves shape part drawing and amendment, pattern reading and saving, reading Autocad file, nesting process, kerf compensation, automatic cutting path generation, NC file conversion and motor control. Software is devided into 3 modules for easy work. First step enables drawing, amendment and pattern making, followed by automatic nesting and cutting path generation with kerf compensation. In the final step, drawing data is transmitted for the resulting automatic cutting processes. This software would be applicated in gas cutting and textile cutting so that it improves the productivity of cutting process.

• 한국정밀공학회지
• /
• 제13권1호
• /
• pp.38-44
• /
• 1996

The CAD system for design and drawing of limit gauges was constructed and developed. This system was made by Visual Basic program. Using this system, drawings together with concerned data for the manufacturing of limit gauges are generated on the screen, file and printer. The data base was constructed by referring handbooks, textbooks, relevant standards and regulations. This system was proved a powerful tool for design and drawing of limit gauges by actual applications. The output drawings from this system are in good agreement with the drawings and data of the concerned standards and regulations.

• 대한의용생체공학회:의공학회지
• /
• 제7권1호
• /
• pp.3-10
• /
• 1986

In this paper, a scanconverter which displays the biological signals of low frequency on CRT for the purpose of easy read-out is attempted to design for using the CRTC, and it stows some good effectivenesses The results obtained in this experiment are as follows : (1) Using only one chip, CRT controller, it can display both waveforms and characters simultaneously. (2) The flexibility of CPU program can be obtained using the sub-microproce ssor function of CRTC chip. (3) The trend of digital data is possible through the graphic function (4) The vibration of displayed waveform can be prevented using the chip simplification and the trigger signal of one chip. (5) Operation with microprocessor malies the expansion and interface easy.