• Economic and Environmental Geology
• /
• v.23 no.2
• /
• pp.233-244
• /
• 1990

Plutons of Damyang-Jinan area consist of gray feldspar granite gneiss, biotite granite gneiss, foliated granites, Namweon granites, gabbro, biotite granite and Ogangri granite in term of mineralogical, texture and field evidence. From Isotope data of study area, chronological order of the Plutons are the Pre-cambrian gray feldspar granite gneiss(Ar39-Ar40, hornblende, $1998.4{\pm}8.3Ma$), middle to late Triassic Daegang foliated granite(Rb/Sr, whole rock, $288{\pm}4Ma$), foliated hornblende biotite granodiorite(K/Ar, hornblende, $198.7{\pm}9.9Ma$), Sunchang foliated granodiorite(Rb/Sr, whole rock, $222{\pm}4Ma$), foliated two mica granite, Samori foliated granite and Namweon granite(Rb/Sr, whole rock, $211{\pm}3Ma$: K/Ar, hornblende, $203{\pm}10.2Ma$), middle Jurassic Gabbro(K/Ar, hornblende, $180.7{\pm}9MA$) and biotite granite, and Cretaceous Ogangri granite. According to variations diagrams of $Al_2O_3$ versus normative PI(100 An)/(Ab+An), Daegang foliated granite is plotted on tholeiitic series, and other foliated granites on calc alkaline rock series which are consider to be formed by magmatism at continental margin and island arc region. And alkalinity versus $SiO_2$ shows that Daegang folited granite and Samori foliated granite are correspond to alkaline region, foliated hornblende biotite granodiorite and Sunchang foliated granodiorite to calc alkaline region, and foliated two mica granite to both regions. According to ACF diagrams, Daegang and Samori foliated granites are plotted on S-type. Foliated hornblende biotite granodiorite and Sunchang foliated granodiorite on I-type, and foliated two mica granite on both type. Foliated granites are a series of differentiated products from cogenetic magma, and effected under ductile sheared zone. Characteristic foliation of foliated granites are considered to be generated by dextral strike slip faulting and ductile shearing.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1999.03a
• /
• pp.277-284
• /
• 1999

This study describes the influence factors related to slope failure pattern and dimension in the southern Kyounggi area. Intrusive and metamorphic rocks are distributed in the study area. Geological condition, rainfall property and slope geometry are influence on slope failure characteristics in the study we& Geological factors related to slope failure are rock type, geological structure and weathering condition. Because of deep soil (RS-CW) depth of granite region, circular failure type is major failure pattern in granite region. Almost granite slopes with circular or surface failure pattern are failed during heavy rainfall season. But typical wedge failure type related to geological structure factor is a main failure pattern of metamorphic rock slope. Additionally failure dimension is influenced by geological factors and several factors, i.e. natural slope condition, failure type, rainfall intensity and etc. failure height/width ratio and thickness/length ratio of granite slope are 0.88 and 0.23. But the ratios of metamorphic rock slope are 1.36 and 0.19.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.03a
• /
• pp.884-889
• /
• 2005

A lot of landslides were occurred in Gangnung, Macheon and Geochang areas by Typhoons such as RUSA(2002) and MEAMI(2003). Soil properties of these areas are investigated regarding geological conditions in this study. The shallow plane failure were occurred in Gangnung and Geochang areas, whereas the deep circle failure were occurred in Macheon area. The matrix in Gangnung and Geochang areas was composed of Granite, and the matrix in Macheon area was composed of Gabbro. The disturbed and undisturbed soils were sampled in these areas. As the results of laboratory tests using sampled soils, the coefficient of permeability in Granite region is lower than that in Gabbro region. In the cases that the silt and clay contents are included less than 4% for the soils of Granite region and less than 7% for the soils of Gabbro region, the coefficients of permeability are rapidly increased for both soils. In addition, the simple equations for predicting the coefficients of permeability are proposed using the effective particle size and the silt and clay contents according to geological condition.

• Journal of the Korean Geotechnical Society
• /
• v.15 no.1
• /
• pp.175-183
• /
• 1999

Recently, problems related to vibrations of decomposed granite soils have acquired increasing attention in Korea because those soils cover approximately one third of the country. Both resonant column and cyclic triaxial test were performed to investigate deformation characteristics of unsaturated and cement-mixed decomposed granite soils in Suwon region. The important soil parameters in this respect are the shear moduli, dynamic moduli of elasticity and damping ratios. The dynamic parameters are influenced by variables such as strain amplitude, ratio of loading cycles, and degree of saturations, etc. Test results and data have shown that the optimum degree of saturation to the maximum shear modulus due to a capillary menisci effect was about 17~18 % at low strain amplitude and 10~15 % at intermediate strain amplitude. This paper suggests the range of threshold strain and mean shear modulus of decomposed granite soils in Suwon region. It also proposed the empirical relationship between the dynamic parameters for cement-mixed and non-mixed decomposed granite soils.

• Journal of Korean Society of Forest Science
• /
• v.22 no.1
• /
• pp.63-65
• /
• 1974

In this study, it is aimed to elucidate the relationship between the distribution of barren land in mountainous area and the geological and topographical characteristics of barren land in south Korea. To do this, the Land Use Classification Maps for mountainous areas (scale:1/50,000), compiled by the Roseources Survey Office of Mountainous and Forest Areas, Geological Maps of Korea (scale: 1/50,000), and Map of Geology of Korea (scale: 1,000,000), compiled by the construction Research Institute of Korea were used. The following conclusions have been obtained from this study. 1) Areas of strata that are most liable to dilapidation are found in such order of the broadest to broad as region of granite, granite-gneiss, and the specific stratum called the Kyongsang Stratum (named after the provinces) of the northern and southern Kyongsang Provinces comprising sandstones, gravelstones, crumblestones, and other stones similar to these species. These rocky hills occupy vast areas in size, so to speak, they are estimated to cover roughly 57% of the total barren and naked areas in the country. 2) The average size in area of barren and nated land, as one piece of land, 32 hectares of granite region, 15 hectares of granite-gneiss region and little less than 13 hectares of Kyongsang strata region were calculated.

• Economic and Environmental Geology
• /
• v.8 no.1
• /
• pp.25-56
• /
• 1975

Most fluorite deposits of South Korea are distributed in three metallogenic zones namly as: Hwacheon, Hwangangni and Geumsan metallogenic zones. Fluorite deposits of each zone show The characteristic features owing to the geological setting, the structural patterns and their forming processes. deposits of the Hwacheon metallogenic zone are wholly fissure filling hydrothermal veins emThe bedded in shear fractures of the granite gneiss or schists of Precambrian age or in the cooling fractures of the granite and acidic hypabyssal rocks which are assumed to be a differentiated sister rock of the granite. Localization of most fluorite veins of the region is structurally controlled by NW and EW fracture systems and genetically related to the granite intrusion which ascertained as motivating rock of the fluorite mineralization. Fluorites are in most cases accompanied by quartz, chalcedony mainly and rarely agate, calcite, barite and sulphide base metals in some localities. The deposits of the Hwangangni metallogenic zone were formed at the last stage of hydrothermal polymineralization of W, Mo, Cu, Pb, Zn. The majority of the fluorite ore bodies were originated from replacement in limestone beds of Great Limestone Series or in calcareous interbeds of metasediments, whereas some cavity-filling ore bodies were embedded in phyllites and schists of the Ockcheon system and along the fissures in the replaced beds which were originated by volume decrease. The localization of fluorite deposits in this region is genetically related to the Moongyong granite which has been dated as middle Cretaceous, and controlled structurally by the $N20^{\circ}{\sim}50^{\circ}W$ extension fracture system or axial planes of folds, and by faults of NE direction that acted as paths of ore solution. The deposits of the Geumsan metallogenic zone are seemed to be formed through the similar process as that of Hwangangni metallogenic zone, but characteristic distinctions are in that they are more prevailing fracture filling veins and large number of the deposits are localized in roof-pendants or xenolithes of limestone in granites and porphyries. Igneous rocks that presumably motivated the mineraltzation are middle Cretaceous Geumsan granite and porphyries. Metallogenic epoch of the fluorite mineralization of South Korea are puesumably limited in early-middle Cretaceous. Studies of the fluid inclusions in fluorites of the region reveal that the homogenization temperature of the fluorite deposits are as follows: Hwacheon metallogenic zone : $95^{\circ}C{\sim}165^{\circ}C$; Hwangangni metallogenic zone : $97^{\circ}C{\sim}235^{\circ}C$; Geumsan metallogenic zone : $93^{\circ}C{\sim}236^{\circ}C$. Judging from the above results, the deposits of the Hwancheon region were formed at the epithermal stage, and those in the Hwangangni and Geumsan regions, were deposited at epithermal stage preceded by mesothermal mineralization of small scale in which some sulphide minerals were deposited. The analytical data of minor elements in the fluorites reveal that ore solutions of Hwangangni metallogenic zone seemed to be emanated in more acidic stage of magma differentiation than Hwacheon metallogenic zone did.

• Economic and Environmental Geology
• /
• v.27 no.4
• /
• pp.375-385
• /
• 1994

The studied area is composed of Precambrian gneiss complex, middle Jurassic biotite granite, late Cretaceour sediments, volcanics and pink feldspar granite. Characteristic minerals of the biotite granite is plagioclase and hornblende whereas the pink feldspar granite is pink feldspar (perthite) and quartz. Plagioclase compositions of the biotite granite and the pink feldspar granite are oligoclase to calcic andesine ($An_{18-44}$) and sodic albite ($An_{0.5-5.0}$), respectively. In the variation diagrams of the Harker and normative Q-Or-Pl diagram, the biotite granite belongs to the category from granodiorite to granite, the pink feldspar granite from nomal to late granite. The values of D.I. L.I. and alkalinity of the pink feldspar granite are higher than those of the biotite granite. While CaO is enriched in the biotite granite, $K_2O$ is enriched in the pink feldspar granite. The ratio of $K_2O/Na_2O$ which indicates the relative ratio of alkali is 1.06 in the pink feldspar granite, and 0.86 in the biotite granite. In A-M-F and N-C-K diagrams both these granites are plotted in peraluminus granite ($Al_2O_3$>$Na_2O+K_2O+CaO$) region, assigned to calc alkaline series and alkaline series respectively. Put into the form of A-C-F diagram, the biotite granite falls under I-type, and the pink feldspar granite S-type. On the base of whole rock ratios of $Fe^{+3}/Fe^{+2}+Fe^{+3}$ and $^{87}Sr/^{86}Sr$ for the granites in studied area, the biotite granite indicates ilmenite series (0.26) and S-type and/or contaminated I-type ($0.72020{\pm}0.00050$), the pink feldspar granite magnetite series (0.44) and I-type ($0.70826{\pm}0.00020$).

• Economic and Environmental Geology
• /
• v.34 no.1
• /
• pp.55-70
• /
• 2001

Granitoids in the Younggwang-Kimje area can be divided into two types of granite. One is foliated granite (Cheongup and Kochang foliated granites) developed along the NE-SW direction kwangju fault system and the other is undeformed granite (Kimje and Younggwang granites) developed in the western part of the area. $SiO_2$ content of study area, Younggwang granite is 62.8-74.0%, Kochang foliated granite is 64.5-74.4%, Cheongup foliated granite is 64.5-70.2%, Kimje granite is 63.4-72.0%. The result indicated that these granitoids belong to the intermediate and acidic rock. In Harker's diagram, as $SiO_2$ increases, $Al_2O_3$, $Fe_2O_3$, MgO, CaO, $TiO_2$> $P_2O_{5}$s and MnO decrease, but $K_2O$ increases. In AFM diagram, Younggwang granite, Kochang foliated granite, Cheongup foliated granite and Kimje granite belong to calk-alkaline rock series. And in triangular diagrams of normative Qz-Or-Pl and An-Ab-Or, they are located in granodiorite and granite region. On the co-variation diagrams of trace elements with silica, Ba, Co, Li, Nb, An, Rb elements show increasing patterns. The diagrams of ACF and $Na_2O$ vs. $K_2O$ ratios indicate that granitoids of the study area belong to I-type.

• Economic and Environmental Geology
• /
• v.31 no.1
• /
• pp.31-43
• /
• 1998

A total of 469 granitic samples were collected from 44 sites in the Ulsan fault area, southeast Korea. According to the previous petrographic studies, the granitic rocks have been divided into four groups (Hornblende biotite granodiorite, Hornblende granite, Biotite granite and Alkali-feldspar granite). NRM intensities, values of low field magnetic susceptibility, and magnetic behaviors during stepwise demagnetization experiments suggest rather a three-fold classification: In this scheme, Hornblende granite and Biotite granite are grouped together, as they did not show any significant differences in magnetic characteristics. Based on the Ishihara (1979)'s criterion, Alkali-feldspar granite is classified as ilmenite-series granite, whereas others are classified as magnetite-series granite. In the eastern part of the study area including the Tertiary basin area, declinations of site-mean characteristic remanent magnetizations (ChRMs) show clockwise deflection of more than 30 from the reference direction of east Asia. Both along and in the adjacent region of the Ulsan fault-line, however, no deflection of remanent direction was observed. A boundary line between the deflected and undeflected site-mean ChRMs is defined in this study, which runs roughly parallel to the Ulsan fault-line at the distance of about 6km eastward from the fault-line. We suggest that this newly found boundary line, which we call Yonil tectonic line, released dextral simple shear stress acted in the southeastern part of the Korean peninsula during the opening stage of the East Sea in the Early Cenozoic.

• Economic and Environmental Geology
• /
• v.25 no.2
• /
• pp.133-143
• /
• 1992

Ulsan granite is plotted mainly in the region of syeno-granite of the Streckeisen diagram, which consists with those of iron related granites in the area of Kimhae-Mulgum, while Chindong granites and Yucheon-Eonyang granites are plotted in the regions of granodiorite-diorite and monzo-granite, respectively. These granites show a differentiation trend of calc-alkaline magma, and their magmatic evolution from intermediate to acidic rocks is consistant with the general crystallization path of the Cretaceous granitic rocks in the Gyeongsang basin. The difference index (D.I.) is 70~90 for Ulsan granite, which lies between 35~80 of Chindong granites and 85~95 of Yucheon-Eonyang granites. These granites are distinguishable from each other by variation patterns of chemical elements. For instance, there is clear difference in content of some major and trace elements between Ulsan granite and Cu-related Chindong granites: Ulsan granite has high content of K (2.68%) and Ba (636 ppm), and low content of Ca (1.07%), Mg (0.50%) and Sr (185 ppm), whereas Chindong granites has less content of K (1.62%) and Ba (382 ppm), and higher content of Ca (3.75%), Mg (1.42%) and Sr (405 ppm). However, the content of Ulsan granite overlaps partly those of Yucheon-Eonyang granites, which are apparently dividable from Chindong granites. There is an usual trend that Cu content is high in Chindong granites of Cu province and Zn content is higher in Yucheon-Eonyang granites of Pb-Zn province. But it is unusual that Cu and Zn are higher in Ulsan granite (34 ppm, 74 ppm) than in Chindong granites (15 ppm, 22 ppm) and Yucheon-Eonyang granites (14 ppm, 43 ppm). This may be due to the reason that Ulsan granite is productive and Cu-Zn minerals are associated with iron ores. Productive Chindong granites in Haman-Gunbug area and Yuchon-Eonyang granites near ore deposits have higher content of Cu and Zn than Ulsang granite. Therefore, it is expected that chemical variation patterns of granites are applicable to distinguish mineral commodity of ore deposits (iron, copper, or lead-zinc) related with the granites in the Gyeongsasng basin.