• 한국재료학회지
• /
• 제21권4호
• /
• pp.187-191
• /
• 2011

Prior austenite grain size plays an important role in the production of high strength hot-rolled steel. This study investigated the effect of Ti and C contents on the precipitates and prior austenite grain size. Steel with no Ti solutes had prior austenite grain size of about 620 ${\mu}m$. The addition of Ti ~ 0.03 wt.% and 0.11 wt.% reduced the prior austenite grain size to 180 ${\mu}m$ and 120 ${\mu}m$, respectively. The amount of Ti required to significantly decrease the prior austenite grain size was in the range of 0.03 wt.%. However, the amount of carbon required to significantly decrease the prior austenite grain size was not present from 0.04 wt.% to 0.12 wt.%. Oxides of Ti ($Ti_2O_3$) were observed as the Ti content increased to 0.03 wt.%. The specimen containing 0.11 wt.% of Ti exhibited the complex carbides of (Ti, Nb) C. The formation of Ti precipitates was critical to reduce the prior austenite grain size. Furthermore, the consistency of prior austenite grain size increased as the carbon and Ti contents increased. During the reheating process of hot-rolled steel, the most critical factor for controlling the prior austenite grain size seems to be the presence of Ti precipitates.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 춘계학술대회 논문집
• /
• pp.143-146
• /
• 2001

The evolution of dynamic recrystallization (DRX) was studied with torsion test for AISI 304 stainless steel in the temperature range of $900-1000^{\circ}C$ and strain rate range of 0.05-5/sec. The evolution of DRX was investigated with microstructural analysis and change of flow stress curve slope. The investigation of serrated grain boundaries using electron back scattered diffraction (EBSD) analysis indicated that the nucleated new DRX grain size was similar to the size of bulging part. Before the steady state, the dynamically recrystallizing grains do not remain a constant size and gradually grow to the size of fully DRX grain at steady state. The calculation of grain size was based on $X_{DRX}$ and the assumption, which the nucleated DRX grains are growing to the steady state, continuously. It was found that the calculated results agreed with the microstructure of the alloy.

• 연구논문집
• /
• 통권22호
• /
• pp.127-139
• /
• 1992

The mechnial properties such as fracture strength, ductility and fatigue strength of Cu shape memory alloy are lower than those of Ti-Ni SMA, because of their high elastic anisotropy and large grain size. And in order to improve the mechanical property of Cu SMA, some techniques such as casting method by addition of refining element, powder metallurgy and rapid solidification process have been studied on the refinement of the grain size of Cu SMA. This study was carried out to refine the grain size of CuAlNi SMA by applying the melt spinning method. According to this study, the conclusions are as follows; - grain size of the melt-spun ribbon was about $1\mum$ - there was not change in grain size, although increasing of hot pressing temperature -grain size of the hot-extruded specimen was about $30-40\mum$, it is more refiner than that of castings

• 한국세라믹학회지
• /
• 제32권2호
• /
• pp.147-154
• /
• 1995

Abnormal grain growth behavior of BaTiO3 ceramics with controlling of particle size distribution of calcined powder was investigated. The particle size distribution was controlled by changing the calcining temperature or by using of classification and regrinding process. With broadening of the normallized size distribution in calcined powder, it showeda normal grain growth behavior in sintered body due to an increase of volume fraction of seed grain in the calcined powder. It was supposed that the seed grains could easily contact each other for the rapid grain growth during sintering process and resulted in fast switching-over from abnormal to normal grain growth stage.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1337-1342
• /
• 2008

The whisker grows at the plating of a lead frame so that it causes the serious problem like the short. To prove this case, many people have studied the cause and influence of the tin whisker growth. This study explains the grain size affects the growth of the whisker in the lead frame. By these studies about the whisker, the whisker growth is discovered by stresses generated by the intermetallic compound and CTE mismatch in both plating and base metal. The stresses or lattice defect generated in the plating process changes grain structure of plating. Consequently, these various stresses are stabilized by forming unspecified whiskers through lots of grain boundaries. Because the grain boundary is the path of the whisker growth, the smaller grain size exists, the more whiskers grow.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1997년도 춘계학술대회논문집
• /
• pp.73-76
• /
• 1997

Nanocrystalline materials have been modeled as a mixture of the crystallite and the grain boundary phases. The mechanical property has been calculated using the rule of mixtures based on the volume fractions. The critical grain size concept suggested by Nieh and Wadsworth and porous material model suggested by Lee and Kim were applied to the calculation. The theoretical results fit very well with the experimental values

• 한국자기학회지
• /
• 제6권3호
• /
• pp.165-169
• /
• 1996

극박 방향성 규소강판의 철손을 저감시킬 목적으로 열처리방법을 이용하여 결정 크기의 제어에 의해 자구폭을 변화시켰으며 결정립의 크기와 직류 자기특성, 철손, 자구폭과의 관계에 대해 검토하였다. 결정립 크기가 1 mm 이하로 작게되어도, $B_{8}$는 1.96 T 이상의 높은 값을 나타내었고 항자력 $H_{c}$는 결정립 크기의 감소에 따라 증가하였다. 결정립 크기가 1 mm 이하의 범위에서 결정립 크기를 감소시킴에 의해 자벽수가 증가하였으며 여자주파수가 높게 됨에 따라 증가하는 자벽수도 결정립 크기가 작을수록 많아지고 자구 세분화에 효과적이었다. 결정립 크기의 감소는 자구 세분화에 의해 와전류 손실을 저감시키지만 히스테리시스 손실이 지배적으로 낮은 여자주파수의 철손은 결정립 크기가 작은 시료일수록 높은 값을 나타내었다. 그러나 높은 주파수 영역의 철손은 와전류손실이 지배적이기 때문에 결정립 크기가 작은 시료일수록 낮은 값을 나타내었다. 이 결과로부터 결정립크기를 제어함에 의해 자구폭을 변화시킬수 있으며 극박방향성 규소강판의 저 손실화에 매우 유리한 수법인 것을 알았다.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.67-67
• /
• 2017

We developed the breeding materials with diverse grain size and shape in japonica rice. Grain size and shape are important factors affecting consumer preference and choice. However, most of Korean japonica rice cultivars have small, short, and round grain. To diversify the grain size and shape of japonica rice, we conducted the breeding program using donor parents, Jizi1560 and Jizi1581. Jizi1560 and Jizi1581 are japonica germplasm with extremely large grain. Four crosses between the each donor parents and high yielding japonica rice cultivars, Deuraechan and Boramchan, were constructed and then anther culture method was applied. We obtained 290 doubled-haploid (DH) lines with appropriated morphological traits and selected 91 DH lines with diverse grain size and shape. The grain related-traits of the selected DH lines showed a higher diversity when compared with 319 cultivars developed by NICS (264 japonica, 13 black, and 32 Tongil type cultivars). We designated the selected DH lines, four parents, and Daeripbyeo 1, large grain japonica cultivar, as the breeding materials for further analysis. The breeding materials were classified into five groups, A to E, based on the grain-related traits. Group A (including Jizi1581) and Group B (including Daeripbyeo 1) showed similar grain width, whereas Group A exhibited longer grain length and heavier grain weight. Group C (including Deuraechan and Boramchan) showed shorter and rounder grain shape and smaller grain size than any other groups. Group D including solely Jizi1560 had extremely large grain, such as the longest grain length, width, and thickness and heaviest grain weight. Group E including only two DH lines had long and slender grain shape, so that showed the highest ratio of length to width. The grain size and shape of the breeding materials exhibited beyond the characteristics of previously developed Korean japonica cultivars. The breeding materials will be applied in the breeding programs to diversify the grain size and shape of japonica rice.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1989년도 춘계학술대회 논문집
• /
• pp.107-109
• /
• 1989

Based on the ferroelectric microstructural residual stress model, the relation between grain size and residual elastic energy was proposed. It was found that the residual elastic energy increased with decreasing grain size by modeling and DSC results. This residual elastic energy change with grain size which induce the phase transituion mode change was the cause of a diffuse phase transition in small grain size.

• 한국주조공학회지
• /
• 제3권3호
• /
• pp.167-173
• /
• 1983

The effect of sand grain size on the various properties of mold is not only basic but important interest which we have to deal with.And the relation among the various properties of mold (strength, permeability, flowability, compactability, hardness, deformation, toughness etc.) is very complicated and inaccurate, so we can delineate the behavior of mixture (sand+water+bentonite) with experience only. Within recent years a so-called rigid-water theory has been accepted as a means of advancing logical explanations for the research aimed at delineating sand-clay-water relationships. By changing grain size or mesh no. of grain, specimens have been subjected to green compressive strength, permeability, deformation, flowability, compactablity, toughness at room temperature. Under constant mulling energy and ratio of water/bentonite, the results obtained were as follows: 1. With decreasing grain size green compressive strength of the specimen increased. 2. With decreasing grain size permeability decreased. 3. With decreasing grain size flowability and bulk density decreased but compactability increased. 4. With decreasing grain size deformation decreased but toughness increased. 5. At 60 mesh no., the properties of specimen are conspicuously changed. The reason is that the total surface area of sand grain which affects the type of bonding between sand grains is more changed at 60 mesh number.