• Journal of agriculture & life science
• /
• v.51 no.2
• /
• pp.165-173
• /
• 2017

To evaluate performance of the experimental pick-up type pulse crop harvester for harvesting sprout bean, its pick-up and discharging grain loss ratios, grain quality such as whole grain ratio, damaged grain ratio, unthreshed grain, and foreign material ratio in grain tank, germination rate of threshed grain, and theoretical field capacity of the harvester were analyzed according to engine speeds of 2000, 2400 and 2800 rpm and harvesting speeds of 0.6, 1.0 and 1.4 m/s. It is considered that the harvester showed optimum performance at the engine speed of 2800 rpm and the harvesting speed of 1.0 m/s, and then average pick-up grain loss ratio of 2.7%, discharging grain loss ratio of 0.5%, whole grain ratio of 99.3%, damaged grain ratio of 0.2%, unthreshed grain ratio of 0.0%, foreign material ratio of 0.2%, and germination rate at 8 days after seeding of 72.8% were shown. It is considered that the harvester has lower grain loss and higher grain quality than the imported bean combines. And also as it could harvest 3 rows of cut and dried sprout bean crop width of which was about 2 m, its effective field capacity was estimated for about 50 a/h.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.3278-3288
• /
• 2011

Bulk freight is transported by a freight car, ship and tank lorry without packaging in a state of particles or powders. In korea, the main bulk freight include oil, grain, coal, cement, iron ore and these are occupied nearly 30% of the volume of gross domestic freight transportation. Therefore it is in important to transport efficient bulk freight transport system for the improvement of national distribution competitive as raw material for industry. Generally environment-friendly transfer modes such as railway and sea transport play an important role in bulk freight transport due to the mass transfer characteristics of bulk freight. This study is carried out for examining the problem of oil, grain, coal, cement, ore transportation through analyzing distribution flow of items and understanding characters of transfer modes.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.4
• /
• pp.451-459
• /
• 2011

Austenitic stainless steels of 300 series are widely used as the structural material due to excellent their cryogenic mechanical properties at cryogenic temperature. There are 316 steel which molybdenum is added to improve the austenitic stability, 316L which carbon contents is reduced to decrease the grain boundary precipitation during welding process, and 316LN which nitrogen is added to improve the austenitic stability and the mechanical strength. But material researches for the welding conditions and mechanical properties at the cryogenic temperature were insufficient so far. In this paper, the characteristics of mechanical properties considering the effect of welding conditions and cryogenic temperature are studied.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2003.10a
• /
• pp.47-50
• /
• 2003

JA2 Propellants, made by non-solvent process, are of great interest for the tank gun propellant. This is due to high energy. The grain geometries of JA2 and modified JA2 propellant were designed for application to 105mm APFSDS projectile. The combustion, thermochemical, and interior ballistic properties of the propellant were tested and calculated. The performances of the propellant were evaluated out using 105mm slug T2 projectiles and 105mm tank gun. The muzzle velocity of the propellants was higher than that of the KM30 for K274 projectile.

• Fisheries and Aquatic Sciences
• /
• v.16 no.4
• /
• pp.279-283
• /
• 2013

We tested the effects of various distillers dried grains (DDGs) in a formulated diet on growth and body composition of juvenile sea cucumber Apostichopus japonicus. DDG is a solid residue obtained by filtering an aqueous mixture of fermented rice with Aspergillus oryzae and yeasts. Six isonitrogenous and isocaloric diets (DDG0, DDG-G, DDG-C, DDG-K, DDG-W, and DDG-P) were formulated to contain 20% DDG obtained from different Makgeolli factories. Juvenile sea cucumber (average weight, $2.1{\pm}0.02$ g) were randomly distributed in eighteen 50-L rectangular plastic tanks (40 L of water each) in a seawater flow-through system at a density of 50 juveniles/tank. Three replicate groups of sea cucumber were fed each of the six experimental diets at a feeding rate of 5% body weight per day for 22 weeks. At the end of the feeding experiment, survival and weight gain of the juvenile sea cucumber were not affected by the type of dietary DDG (P > 0.05), and the proximate and amino acid compositions of the whole body were not affected by dietary DDG diets (P > 0.05). These results indicate that rice-based DDG is a potential dietary ingredient that could be used at dietary concentrations of up to 20% for growth of juvenile sea cucumber.

• Korean Journal of Materials Research
• /
• v.17 no.4
• /
• pp.192-197
• /
• 2007

The effects of immersion time in the liquid nitrogen on the behavior of aluminum alloys used for the hydrogen storage tank of auto-mobile at cryogenic temperature were investigated. With increasing immersion time in the liquid nitrogen, the elongation of AI 5083 alloy at cryogenic temperature decreased because of non-uniform fracture of precipitates on the grain boundary, and the serration also occurred because of discontinuous slip due to rapid decreasing of the specific heat. The mechanical properties of AI 6061 alloy at cryogenic temperature were characterized by uniformed yield strength, tensile strength and elongation regardless of the immersion time in the liquid nitrogen. These mechanical properties of aluminum alloys at cryogenic temperature were interpreted by the strength of grain boundary and the slip deformation behavior.

• The Journal of the Acoustical Society of Korea
• /
• v.23 no.5
• /
• pp.362-369
• /
• 2004

The High-frequency (30 ∼ 120 ㎑) bottom reflection loss at rough water-sediment interface is affected by the gram size distribution of the sediments. The roughness of the bottom surface is represented by "acoustical roughness. g/sub R/" The grain size of sandy sediments is g/sub R/∼O(1) and the dependence as a function of frequency. We suggest the modified bottom reflection loss model (HYBRL model , HanYang university Bottom Reflection Loss model) that include in the deviation of the reflection loss as a function of the grain size distribution and frequency dependence. And bottom reflection loss model of frequency dependence and deviation of bottom properties is verified by water tank and field experiments.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.11a
• /
• pp.248-251
• /
• 2007

The blowdown oxidizer feeding system is effective in the respect of higher reliability by the small number of parts and the absence of additional pressurization tanks, but it also has the unfavorable disadvantage such as thrust variation during the operation. Thus, in order to understand the these performance characteristics inherent in the Hybrid Rocket Motor (HRM) with blowdown oxidizer feeding system, this study proposed the integrated mathematical model to describe physical phenomena in the following parts: the oxidizer tank, combustion chamber, fuel grain, nozzle and injector.

• International Journal of Aeronautical and Space Sciences
• /
• v.18 no.3
• /
• pp.512-521
• /
• 2017

This paper reports development process of a university-based sounding rocket using simplified hybrid rocket propulsion system for low-altitude flight application. A hybrid propulsion system was tried to be designed with as few components as possible for more economical, simpler and safer propulsion system, which is essential for the small scale sounding rocket operation as a CanSat carrier. Using blow-down feeding system and catalytic ignition as combustion starter, 250 N class hybrid rocket system was composed of three components: a composite tank, valves, and a thruster. With a composite tank filled with both hydrogen peroxide($H_2O_2$) as an oxidizer and nitrogen gas($N_2$) as a pressurant, the feeding pressure was operated in blowdown mode during thruster operation. The $MnO_2/Al_2O_3$ catalyst was fabricated for propellant decomposition, and ground test of propulsion system showed the almost theoretical temperature of decomposed $H_2O_2$ at the catalyst reactor, indicating sufficient catalyst efficiency for propellant decomposition. Auto-ignition of the high density polyethylene(HDPE) fuel grain successfully occurred by the decomposed $H_2O_2$ product without additional installation of any ignition devices. Performance test result was well matched with numerical internal ballistics conducted prior to the experimental propulsion system ground test. A sounding rocket using the developed hybrid rocket was designed, fabricated, flight simulated and launch tested. Six degree-of-freedom trajectory estimation code was developed and the comparison result between expected and experimental trajectory validated the accuracy of the developed trajectory estimation code. The fabricated sounding rocket was successfully launched showing the effectiveness of the simplified hybrid rocket propulsion system.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1317-1321
• /
• 2007

Aluminized steel sheet that Al coated on low carbon steel has a excellent heat resistance, thermal reflection and corrosion resistance. It has applied to fuel tank, automotive exhaust systems, etc. Laser weldability of the aluminized steel for the full penetration welding will be described in this paper. We focused on the effect of Al coating conditions on weld strength. For these objectives, aluminized steel sheets that has various thickness and coating weight were prepared for laser welding. And then, tensile-shear and hardness test were carried out. At that same time, Al content mixed in weld after laser welding was evaluated and investigated a correlation between the mixed Al and mechanical properties. Besides, as removing partially coating layer, weldability has been investigated according to position of coating layer. As a result of this study, as increasing Al content in weld, tensile-shear strength was decreased. Also it was identified that Al of coating layer caused grain growth.