• Journal of The Korean Astronomical Society
• /
• v.11 no.1
• /
• pp.31-36
• /
• 1978

Although Serkowski used a single value K=1.15 in representing all the observed interstellar linear polarization curves by his empirical relation $p({\lambda})/P_{max}$=exp (-K $1n^2({\lambda}_{max}/{\lambda})$), where $p_{max}$ is the maximum polarization at wavelength ${\lambda}_{max}$, we have noticed a meaningful variation in K from observations of 72 stars. By comparing K's with $P_{max}/E_{B-V}\;and\;with\;{\lambda}_{max}$, we have examined how the shape of the polarization curve is related with the degree of grain alignment on one hand, and with grain sizes on the other. We have shown that correlations between K, $P_{max}/E_{B-V}\;and\;with\;{\lambda}_{max}$, are consistent with the idea of Davis-Greenstein mechanism for grain alignment.

• 한국기계연구소 소보
• /
• s.16
• /
• pp.29-39
• /
• 1986

Several heat treatment were applied to on HSLA steel of type StE47 (German standard) to produce five ferrite microstructures of different strength and at least two different grain sizes respectively. Whereas the ferrite microstructure had a strong influence on yield strength the effect of grain size was negligible. The different strength levels could be explained by regarding the arrangement of dislocations and vanadium carbide particles, and their mutual interaction. Specimens tranformed at $600^{\circ}C$ showed the highest strength levels. In this case precipitation has occured after the $\gamma$- $\alpha$ transformation. Very small VC particles are arranged mostly along dislocation lines. Increasing both, grain size and pearlite volume fraction leads to a remarkable shift of transition temperature which was further enhanced by increasing ferrite strength.

• Korean Journal of Veterinary Research
• /
• v.46 no.3
• /
• pp.267-269
• /
• 2006

A 12-year-old female Tammar Wallaby (Macropus eugenii) died after a 6-day history of depression, anorexia, and coughing. The necropsy revealed pustules of varying sizes on the lung surface from which a pure culture of Staphylococcus aureus was isolated. Histopathologically, the pulmonary nodules formed typical granulomatous inflammation. The center of the granulomatous foci consisted of a necrotic center and grain particles with gram positive cocci that were surrounded by eosinophilic club-like bodies containing Splendore-Hoeppli material. To our knowledge, this is the first report of aspiration pneumonia with respiratory botryomycosis as a result of grain inhalation in a Tammar Wallaby.

• Journal of the Microelectronics and Packaging Society
• /
• v.12 no.2 s.35
• /
• pp.135-140
• /
• 2005

Although it was recently observed that severe fatigue damage was formed in Al or Cu interconnects due to the cyclic temperatures generated by Joule heating of the metal lines by the passage of alternating currents (AC), AC loading frequency effect on the damage evolution characteristics are not known so far. This work focused on the effect of AC loading frequency (100 Hz vs. 10 kHz) on the thermo-mechanical fatigue characteristics by using polycrystalline sputtered Cu lines with temperature cycles with amplitudes from 100 to $300^{\circ}C$. It was consistently observed that higher loading frequency accelerated damaged grain growth and led to earlier failure irrespective of Cu grain sizes. The frequency effect is believed to result from differences in the concentration of defects created by the deformation-induced motion of dislocations to the grain boundaries.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.529-530
• /
• 2006

This paper concerned with SPS (spark plasma sintering), hot pressing of sinter nanometer WC-Co powder and discussed the density, hardness, microstructures and grain sizes of the alloys sintered. The results showed that the two sintered techniques could produce high density alloys and play well on the grain growth, but SPS could lower the sintering temperature and shorten sintering time. Besides, the hardness of the sintered cemented alloys that was dependent on the grain size and densification could also be improved.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.861-864
• /
• 2000

Ferroelectric thin film capacitors with high dielectric constant are important for the application of memory devices. In this work, thin films of PLT(28)(Pb$\sub$0.72/La$\sub$0.28/Ti$\sub$0.93/O$_3$) were fabricated on Pt/Ti/SiO$_2$/Si substrates in-situ annealing and ex-situ annealing have been compared depending on the annealing time. We have systematically investigated the variation of grain sizes depending on the condition of post-annealing and the variation of deposition rate. C-V measurement, ferroelectric properties, leakage current and SEM were performed to investigate the electrical properties and the microstructural properties of Pb(La,Ti)O$_3$.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.428-430
• /
• 2009

C-axis-oriented ZnO thin films were successfully deposited on p-Si (100) in an RF magnetron sputtering system. Deposition conditions such as deposition power, working pressure, and oxygen gas ratio were varied. Crystalline structures of the deposited ZnO films were investigated by a scanning electron microscope (SEM) technique. Results show that the deposition parameters can have a strong impact on the preferred orientations and grain sizes of the deposited ZnO films.

• Journal of radiological science and technology
• /
• v.6 no.1
• /
• pp.43-67
• /
• 1983

In order to increase the sensitivity of the photographic emulsion, one of the chemical sensitizers hydroxymethane sulfonic acid sodium salt(HMS) was applied through the chemical ripening process and following four types of emulsion were prepared. Their grain sizes were determined through the electron microscope. The ranges of average grain sizes were $0.05-0.40{\mu}m$ for silver chlorobromide emulsion of low sensitivity $0.10-0.45{\mu}m$ for the silver chlorobromide emulsion of medium sensitivity, $0.60-1.05{\mu}m$ for the silver iodobromide emulsion of high sensitivity, and $0.90-1.55{\mu}m$ for the ammonical silver iodobromide emulsion of high sensitivity. Through the reduction sensitization with HMS, they showed significant sensitivity enhancement by the increment of HMS concentration above pH 5.5 and pBr 3.0. Required sensitivity was obtained above pH 6.2 and pBr 3.3 when sulfur and gold sensitization were applied. Fog formed along the reduction sensitization was successfully prevented by the addition of 5.5-dimethylhydantion.

• Journal of Environmental Impact Assessment
• /
• v.19 no.5
• /
• pp.497-510
• /
• 2010

Considering to the geochemical behaviors and environmental changes of bottom sediments in streams, Gwangju metropolitan city, this study focuses to analyses on grain sizes, metal elements and organic carbons in sediment samples from Yeongsan and Hwangryong rivers, and Gwangju stream. In the sediments, contents of Cu, Zn, Pb, P and TOC were highly variable, in the case of Gwangju stream particularly. Yenogsan and Hwangryong rivers are influenced by grain sizes and surrounding geological settings and Gwangju stream is connected to organic matters related to life fouls and so forth, with respect to the geochemical behaviorof bottom sediments. Li, Zn, Pb and Cu were enriched in Yeongsan and Hwangryong rivers and Li, Cu, Zn, Pb and P enriched in Gwangju stream, respectively. In the heavy metal contamination of above drainages, the site mutually connected Seobang(GJ 4) with Donggye(GJ 7) streams shows the highest values, in peculiar. It is inferred that those contamination values are mainly related with urban foul waters in the city.

• Journal of Powder Materials
• /
• v.27 no.5
• /
• pp.373-380
• /
• 2020

The purpose of this study is to investigate the densification behavior and the corresponding microstructural evolution of tantalum and tantalum-tungsten alloy powders for explosively formed liners. The inherent inhomogeneous microstructures of tantalum manufactured by an ingot metallurgy might degrade the capability of the warhead. Therefore, to overcome such drawbacks, powder metallurgy was incorporated into the near-net shape process in this study. Spark plasma-sintered tantalum and its alloys with finer particle sizes exhibited higher densities and lower grain sizes. However, they were contaminated from the graphite mold during sintering. Higher compaction pressures in die and isostatic compaction techniques also enhanced the sinterability of the tantalum powders; however, a full densification could not be achieved. On the other hand, the powders exhibited full densification after being subjected to hot isostatic pressing over two times. Consequently, it was found that the hot isostatic-pressed tantalum might exhibit a lower grain size and a higher density as compared to those obtained in previous studies.