카본 전극 페로브스카이트 태양전지의 광활성층을 형성하는데 열판, 오븐, 쾌속열처리로 방법을 달리하며 이때 광전기적 특성과 미세구조 변화를 확인하였다. Glass/FTO/compact TiO2/meso TiO2/meso ZrO2/perovskite/carbon electrode 구조의 페로브스카이트 태양전지 소자를 열판 공정, 오븐 공정, RTA(rapid thermal annealing) 공정을 이용하여 준비하였다. 이때 광전기적 특성과 미세구조를 solar simulator와 광학현미경, 장발산주사전자현미경을 이용하여 각 소자의 특성을 분석하였다. 광전기적 특성 분석 결과, RTA 공정을 이용하여 제작한 소자에서 가장 우수한 광전기적 특성을 확인할 수 있었다. 미세구조 분석 결과 열판 공정과 오븐 공정으로 제작한 시편은 카본 전극 상부에 과잉 페로브스카이트 상이 형성되고, RTA 공정으로 제작한 시편에서는 시편 상부에 과잉 페로브스카이트 상 없이, 균일한 페로브스카이트가 형성된 것을 확인할 수 있었다. 또한 단면 미세구조에서는 RTA 공정으로 제작한 소자가 다공성 카본 전극 층에 고밀도의 페로브스카이트 층을 형성하여 우수한 광전기적 특성을 나타내었다. 따라서 대면적 소자 제작의 공정시간을 고려한 새로운 열처리방안으로 RTA 방법의 채용 가능성을 확인하였다.
Diving fishermen are demanding permission to use an inspirator that can efficiently catch Manila clam; however, coastal fishermenargue that the use of inspirator devastates the seabed and depletes fishery resources. Therefore, the aim of this study was to evaluate the fishing power of diving gears and its effect on coastal fishing grounds. The average time taken to fish in the seabed (4 m2) with a rake, water gun, and an inspirator was 11.17 min, 13.33 min and 7.81 min, respectivelyThe values of catch per unit time with a rake, water gun, and an inspirator were 3.35 kg/min, 2.26 kg/min, and 3.83 kg/min, respectively. Suspended sediments were observed the most in the water gun fishing area, and were observed more in April when fishing was not carried out than in February when fishing was carried out. However, the difference in the amount of sediment deposited in the fishing area using the three-fishing gears was very small. For an accurate analysis of the impact of the fishing gears on the seabed, supplementary tests such as grain size analysis and changes in benthic organisms need to be conducted.
Roh, Jeang Kwan;Kim, Jae Kyung;Kim, Sa Ick;Ra, Jong Bum;Kim, Yu Jung;Park, Sang Jin
Journal of the Korean Wood Science and Technology
/
제32권3호
/
pp.42-51
/
2004
Wood veneer-bamboo zephyr composite board (WBCB) was manufactured to evaluate the properties of bamboo as alternative raw materials for the manufacture of composite panels. Bamboo zephyr was prepared using Moso bamboo (Phyllostachys pubesens Mazel. et Z), Giant timber bamboo (Phyllostachys bambusoides Sieb. et Zucc), and Hachiku bamboo (Phyllostachys nigra var. henosos Stapf). The effect of age and species of bamboo on zephyr production was investigated in terms of the pass number of bamboo split through the rollers, and the width increasing rate of bamboo split. Five-ply WBCBs were produced with Keruing veneers as face and back layers, leading to three layers of bamboo zephyr sheets as core layer. Each layer was placed so that its grain direction was at right angles to that of the adjacent layer and the layers were bonded together with phenol-formaldehyde (PF) resin.The pass number of bamboo split was increased with an increase of the thickness of culm wall. At the same thickness, Moso bamboo showed no effect of the age of bamboo on the pass number. The pass number of split of Giant timber bamboo was lower than that of Moso bamboo. No significant effect of bamboo species and age on the width of zephyr produced was observed. The width of zephyr obtained could be expressed as a function of diameter multiplied by thickness of culm wall. The physical and mechanical properties of WBCB manufactured in all given conditions did not show any significant differences, and they were above the requirement of Korean Standard (KS).
Lee, Won Hee;Ahmadi, Farhad;Kim, Young Il;Park, Jong Moon;Kwak, Wan Sup
Animal Bioscience
/
제35권3호
/
pp.410-421
/
2022
Objective: Two series of experiments were conducted to determine how the incremental levels of sodium metabisulfite (SMB)-treated fruit and vegetable discards (FVD) in diet of Hanwoo heifers and cows affect their performance and health. Methods: In Exp. 1, 36 Hanwoo heifers were stratified by age (13.3±0.83 mo) and initial body weight (305±19.7 kg), and divided randomly to one of three diets containing 0%, 10%, or 20% SMB-treated FVD (as-fed basis). The experiment lasted 110 d, including 20 d of adaptation. In Exp. 2, 24 multiparous Hanwoo cows were divided into three groups based on age (48.2±2.81 mo) and initial body condition score (2.64±0.33). Cows in each block were assigned randomly to one of three diets containing 0%, 11%, or 22% SMB-treated FVD (as-fed basis). The experiment lasted 80 d, including a 20-d adaptation period. In both experiments, SMB-treated FVD was used as a replacement for wet brewers grain in total mixed ration (TMR). Results: Growing heifers exhibited no differences in their daily feed intake (6.58±0.61 kg/d dry matter [DM]), average daily gain (0.60±0.07 kg/d), and body condition score when they consumed the incremental levels of SMB-treated FVD. Although most blood metabolites were unaffected by treatments, blood urea-N and β-hydroxybutyrate levels decreased linearly as the SMB-treated FVD level increased in TMR. Similar to Exp. 1, minor differences were found in daily feed intake (8.27±0.72 kg DM/d) and body condition score of Hanwoo cows. Most blood metabolites remained unaffected by treatments, but blood urea-N decreased as the SMB-treated FVD level in TMR increased. Conclusion: Our findings suggest that SMB-treated FVD could be safely incorporated into the diet of Hanwoo heifers and cows, potentially improving N-use efficiency in the body while not impairing performance or health.
As the consumption of corn increases, the production of by-products is also increasing. In this study, functional substances and antioxidant activities of corn by-products were investigated to determine their applicability as functional materials. Total polyphenol, flavonoid contents, and ABTS antioxidant activity were the highest in leaves. The total phenolic acid content was the highest in cobs; p-coumaric and ferulic acid were the main components. Phytosterol content in leaves and stems was high at 64 and 50 days after sowing, 261.4 and 274.7 mg/100 g, respectively. β-sitosterol of the leaves and stems was the highest, 149.2 and 138.7 mg/100 g. The total phytosterol content of grains and by-products harvested 106 days after sowing was in the order of: corn silk, husk, grain, leaf, stem, and cob. Among the phytosterols, β-sitosterol was the highest, followed by stigmasterol and campesterol, and the composition was different depending on part. The total phytosterol content was the highest in husk and corn silk, but the stems and leaves, which account for 50% of the total corn biomass, also contained high phytosterol content. Therefore, corn leaves and stems are expected to be used as functional raw materials for the development of functional materials in the future.
Ge Zhang;Gang Zhang;Jinbiao Zhao;Ling Liu;Zeyu Zhang
Animal Bioscience
/
제37권6호
/
pp.1085-1095
/
2024
Objective: The main objective of this study was to determine available energy and nutritional digestibility of extruded cereals and the effect of extrusion on the nutritional value of feed ingredients, aiming to provide scientific basis for efficient application of extrusion in the diets of growing pigs. Methods: In Exp. 1, 48 crossbred growing pigs (Duroc×Landrace×Yorkshire) with an initial body weight (BW) of 34.6±2.2 kg were selected and fed with eight diets (non-extrusion or extrusion) to determine the digestible energy (DE), metabolizable energy (ME), and nutrients digestibility. Eight diets included extruded grains (barley, wheat, sorghum, or broken rice), while four had unprocessed grains. In Exp. 2, 9 diets were formulated including 4 cereals with extrusion or non-extrusion and a N-free diet. In addition, 9 growing pigs (BW = 22.3±2.8 kg) were fitted with T-cannula in the distal ileum and arranged in a 9×6 Youden square design. Results: Results show that apparent total tract digestibility of gross energy, dry matter, organic meal, ether extract, neutral and acid detergent fiber was not affected by the extrusion process and there was no interaction between cereal type and extrusion treatment on DE, ME. However, the apparent total tract digestibility for crude protein (CP) increased markedly (p<0.05). The standardized ileal digestibility (SID) of all amino acids (AA) except for leucine remarkably increased by extrusion (p<0.05). There was an interaction on the SID of arginine, leucine, isoleucine, methionine, phenylalanine, cystine, and tyrosine in growing pigs between type of grain and extrusion treatment (p<0.05). Conclusion: Extrusion increased the ileal digestibility of CP and most AA in cereals, however, the DE and ME of cereals were not affected in growing pigs.
A. Meza;E. Macia;M. Serrano;C. Merten;U. Gaitzsch;T. Weissgarber;M. Campos
Nuclear Engineering and Technology
/
제56권7호
/
pp.2584-2594
/
2024
A novel approach to incorporating oxide formers into ferritic ODS production has been developed using the co-precipitation technique. This method enables the tailored design of complex nano-oxides, integrated during Mechanical Alloying (MA) and precipitated during Spark Plasma Sintering (SPS) consolidation. Findings illustrate that co-precipitation effectively produces nano-powders with customised compositions, enriching Y, Ti, and Zr in the ferritic grade to condition subsequent oxide precipitation. While the addition of Y-Ti-Zr-O nano-oxides did not prevent the formation of Y-Al-O and Al-containing nano-oxides, these were refined thanks to the presence of well-dispersed Zr. Additionally, the Spark Plasma Sintering (SPS) parameters were optimised to tailor the bimodal grain size distribution of the ODS steels, aiming for favourable strength-to-ductility ratios. Comprehensive microstructural analyses were performed using SEM, EDS, EBSD, and TEM techniques, alongside mechanical assessments involving microtensile tests conducted at room temperature and small punch tests carried out at room temperature, 300 ℃, and 500 ℃. The outcomes yielded promising findings, showcasing similar or better performance with conventionally manufactured ODS steels. This reinforces the effectiveness and success of this innovative approach.
전국적(全國的)으로 실시한 삼요소(三要素) 시험중(試驗中) 1967년(年) 51개소(個所) 68년(年)에 32개소(個所)에서 N 8, 10, 12, 14kg/10a 수준(水準)과 $P_2O_5$ 및 $K_2O$ 각(各) 6과 8kg 시비수준(施肥水準)에 대(對)한 삼요소(三要素) 이용율(利用率)을 조사(調査)하였다. 삼요소(三要素) 이용율(利用率)과 수량(收量) 및 건물생산량(乾物生産量), 삼요소(三要素) 및 규산흡수량(珪酸吸收量)과의 아래와 같은 관계에서 무기양분(無機養分)의 생산(生産)에 기여하는 양상(樣相)이 시용(施用)한 P가 1차적(次的)으로 Si흡수(吸收)를 이차적(二次的)으로 Si가 N흡수(吸收)를 조장(助長)하여 기여하는 P형(型)과 시용(施用)한 K가 P흡수(吸收)를, 이차적(二次的)으로 P가 N흡수(吸收)를 조장(助長)하여 기여하는 K형(型)으로 연도별(年度別) 주도형(主導型)을 구분(區分)할 수 있었다. 1. 질소(窒素)는 전포장수(全圃場數)의 4%, 인산(燐酸)은 48%, 가리(加里)는 38%가 0 또는 부(負)의 이용율(利用率)을 보였으며 이용율(利用率)의 발현빈도(發現頻度) 백분분포(百分分布)가 N는 30 내지 40에서 최고빈도(最高頻度)를 보이는 정규분포(正規分布)에 가깝게, P와 K는 0 이하(以下)에서 최고빈도(最高頻度)를 갖고 점차 감소하는 편의 분포(分布)를 갖는다. 2. 삼요소(三要素) 이용율(利用率) (0 이상(以上)만)은 67년(年)에 N는 33(10kg 시비(施肥) 수준이상(水準以上)) P는 27, K는 40이고 68년(年)엔 40, 20, 46%이고 부(負)의 이용율(利用率)을 0으로한 2개년(個年) 평균(平均)은33(8kg 이상(以上)) 13, 27이었다. 3. 이용율(利用率)의 표준편차(漂準偏差)는 P와 K에서 이용율(利用率)보다 크고 P이용율(利用率)의 변이(變異)가 가장 크다. 4. 이용율(利用率)과 수량(收量) 또는 건물생산량(乾物生産量)과의 유의상관(有意相關) 출현빈도(出現頻度)는 N>K>P의 순(順)이며 10kg 수준의 N이용율(利用率)은 67년(年)엔 P이용율(利用率)과만 63년(年)엔 K이용율(利用率)과만 유의상관(有意相關)을 갖는다. 5. P이용율(利用率)은 그것이 높고 K이용율(利用率)이 낮았던 67년(年)에만, 그리고 K이용율(利用率)은 그와 반대였던 68년(年)에만 모든 처리구의 건물생산량(乾物生産量)과 유의상관(有意相關)을 보이고, 유의상관(有意相關)이 없는 해에는 무비구(無肥區) 및 결비구(缺肥區)區에서 부상관계수(負相顯係數)를 보이고 있다. 6. 이용율(利用率)과 수량(收量)과의 상관(相關)은 이용율(利用率)과 건물생산량(乾物生産量)과의 상관(相關)과 경향은 유사하나 유의성이 적어삼요소(三要素) 영양(營養)은 건물생산(乾物生産)에서 잘 표현된다. 7. N이용율(利用率)은 N시비구(施肥區)의 N흡수량(吸收量)과 많은 경우 유의상관(有意相關)을, 무(無)N구(區)의 흡수량(吸收量)과는 유의부상관(有意負相關)을 보이며, N시비구(施肥區)의 P, K또는 Si흡수량(吸收量)과도 여러 경우 유의상관(有意相關)을 보였다. 8. P이용율(利用率)은 그것이 높았던 67년(年)만 모든 처리구에서 Si흡수량(吸收量)과, 그리고 무(無)P구(區)를 제(除)한 모든 처리구의 N 흡수량(吸收量)과 유의상관(有意相關)을 보여 P는 일차적(一次的)으로 Si흡수(吸收)를 돕고 이차적(二次的)으로 Si흡수(吸收)가 N흡수(吸收)를 조장(助長)함을 나타낸다. P이용율(利用率)은 N시비구(施肥區)의 P흡수량(吸收量)과 K흡수량(吸收量)과도 많은 경우 유의상관(有意相關)을 보였다. 9. K이용율(利用率)은 그것이 컸던 68년(年)에 모든 처리구의 P흡수량(吸收量)과 무(無)N구(區)을 제(除)한 모든 처리구의 N흡수량(吸收量)과 그리고 무(無)P구(區)를 제(除)한 모든 처리구의 K흡수량(吸收量)과 유의상관(有意相關)을 보이며 무(無)K구(區)의 K흡수량(吸收量)과는 부상관(負相關)이고 K이용율(利用率)이 적었던 67년(年)에는 무비구(無肥區)나 결비구(缺肥區)의 P흡수량(吸收量)과 유의성(有意性)은 없으나 부상관(負相關)이었다. K이용율(利用率)은 N나 P와는 달리 K흡수량(吸收量)과 보다 수량(收量)이나 건물생산량(乾物生産量)과의 상관(相關)이 더 크며 K이용율(利用率)이 컸던 해에만 Si흡수량(吸收量)과 무(無)N구(區)와 최고시비구(最高施肥區)에서 유의상관(有意相關)을 갖고 무(無)K구(區)에서 유의부상관(有意負相關)을 보였다. 이로서 K는 일차적(一次的)으로 P흡수(吸收)를 돕고 이차적(二次的)으로 P가 N흡수(吸收)를 도와서 생산(生産)에 기여하는 것 같다. 10. N이용율(利用率)과 수량(收量)이나 건물생산량(乾物生産量)과의 상관(相關)이 무(無)P구(區)에서 보다 무(無)K구(區)가 높고 무(無)K구(區)보다 시비구(施肥區)에서 높으며 이러한 경향은 N이용율(利用率)과 N흡수량(吸收量)사이에서도 동일(同一)하였다. 이 사실과, K이용율(利用率)과 건물생산량(乾物生産量)과의 관계는 P가 N흡수(吸收)를 돕고 N나 P가 부족(不足)할 때에는 K가 N흡수(吸收)를 경쟁적으로 억제하여 생산(生産)을 저하(低下)시키는 것을 나타낸다. 11. 삼요소(三要素) 이용율(利用率)은 67년(年)에는 무(無)P구(區)의 상대건물생산량(相對乾物生産量)과, 68년(年)에는 무(無)K구(區)의 상대수량(相對收量)과 유의상관(有意相關)을 갖는다. 이는 P가 분얼 즉 영양생장단계에, K가 곡실형성 즉 생식 생장단계에 더 작용(作用)하였음을 나타내고 있다. 12. 삼요소(三要素) 이용율(利用率)과 결비구(缺肥區)의 상대생산량(相對生産量)이나 무비구(無肥區)의 결비구(缺肥區)에 대(對)한 상대생산량(相對生産量)과의 상관(相關)에서 어느 경우에도 N가 수도생산(水稻生産)에 가장 큰 역할(役割)을 하고 있음을 보였다. 13. 이상의 결과에서 40 내지 50%의 포장(圃場)은 P와 K를 시비(施肥)하지 아니해도 되며 시비량(施肥量)도 연도(年度)및 포장에 따라 변이(變異)가 커야 할 것이며 특히 P에서 그러하다.
Threshing operation may be one of the most important processes in the paddy post-production system as far as the grain loss and labor requirement are concerned . head-feeding type threshers commercially available now in Korea originally were developed for threshing dry paddy in the range of 15 to 17 % in wet basis. However, threshing wet-paddy with the grain moisture content above 20 % has been strongly recommended, especially for new high-yielding Indica -type varieties ; (1) to reduce high grain loss incurred due to the handling operations, and (2) to prevent the quantitative and qualitative loss of milled -rice when unthreshed grains are rewetted due to the rainfall. The objective of this study were to investigate the adaptability of both a head-feeding type thresher and a throw-in type thresher to wet-paddy , and to find out the possiblilities of improving the components of these threshers threshing. Four varieties, Suweon 264 and Milyang 24 as Tongil sister line varieties, minehikari and Jinhueng as Japonica-type varieties, were used at the different levels of the moisture content of grains. Both the feed rate and the cylinder speed were varied for each material and each machine. The thresher output quality , composition of tailing return, and separating loss were analyzed from the sampels taken at each treatment. A separate experiment for measurement opf the power requirement of the head-feeding type thresher was also performed. The results are summarized as follows : 1. There was a difference in the thresher output quality between rice varieties. In case of wet-paddy threshing at 550 rpm , grains with branchlet and torn heads for the Suweon 264 were 12 % and 7 % of the total output in weight, respectively, and for the Minehikari 4.5 % and 2 % respectively. In case of dry paddy threshing , those for the Suweon 264 were 8 % and 5% , and for the Minehikari 4% and 1% respectively. However, those for the Milyang 23 , which is highly susceptable to shattering, were much lower with 1 % and 0.5% respectively, regardless of the moisture content of the paddy. Therefore, it is desirable to breed rice varieties of the same physical properties as well as to improve a thresher adaptable to all the varieties. Torn heads, which increased with the moisture content of rall the varieties except the Milyang 23 , decreased as the cylinder speed increased, but grains with branchlet didnt decrease. The damaged kernels increased with the cylinder speed. 3. The thresher output quality was not affected much by the feed rate. But grains with branchlet and torn heads increased slightly with the feed rate for the head-feeding type thresher since higher resistance lowered at the cylinder speed. 4. In order to reduce grains with branchlet and torn heads in wet-paddy threshing , it is desirable to improve the head-feeding type thresher by developing a new type of cylinder which to not give excess impact on kernels or a concave which has differenct sizes of holes at different locations along the cylinder. 5. For the head-feeding type thresher, there was a difference in separating loss between the varieties. At the cylinder speed of 600 rpm the separating losses for the Minehikari and the Suweon 264 were 1.2% and 0.6% respectively. The separating loss of the head-feeding type thresher was not affected by the moisture content of paddy while that of the Mini-aged thresher increased with the moisture content. 6. From the analysis of the tailings return , to appeared that the tailings return mechanism didn't function properly because lots of single grains and rubbishes were unnecessarily returned. 7. Adding a vibrating sieve to the head-feeding type thresher could increase the efficiency of separation. Consequently , the tailing return mechanism would function properly since unnecessary return could be educed greatly. 8. The power required for the head-feeding type thresher was not affected by the moisture content of paddy, but the average power increased linearly with the feed rate. The power also increased with the cylinder speed.
세계은행 통계에 따르면 2013~2016년 기간 중 세계 경제 성장에 대한 중국의 기여도는 31.6%인 것으로 나타났다. 이는 미국, EU 및 일본의 기여도를 합한 29.0%에 비해 높은 수치로서 중국 경제가 세계 경제에 미치는 영향력이 상당히 크다고 볼 수 있다. 본 연구는 중국의 주요 품목별(화학제품, 곡물, 철재, 원유, 컨테이너) 연도별 수출입 해상물동량이 세계 경제성장에 미치는 영향을 시계열 데이터 분석 모형을 적용하여 분석하였다. 총 분석기간은 1999~2016년이며, 제1기(1999~2007년)와 제2기(2008~2016년)의 시기별 분석을 수행함으로써 중국 무역이 세계 경제에 미치는 영향력 측면에서 시기별로 어떠한 구조적 변화가 발생했는지 조명하였다. 특히 대다수 선행연구들이 세계 무역이 세계 경제에 미치는 영향력을 분석하였다면, 본 연구는 중국 무역의 영향력을 분석하여 세계 무역 대국으로 부상하고 있는 중국을 집중적으로 분석하였다는 데 의의가 있다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.