• 제목/요약/키워드: Grain filling

검색결과 288건 처리시간 0.038초

연맥 등숙기 동안 $^14$C물질의 전유와 절엽 및 제영이 종실중에 미치는 영향 (Translocation of $^14$C-assimilates During Grain Filling and Influence of Defoliation and Emasculation on Grain Weight in Oats)

  • 이호진
    • 한국작물학회지
    • /
    • 제24권4호
    • /
    • pp.38-44
    • /
    • 1979
  • 연맥품종 Pennfield의 등숙기동안 이삭의 $^14$C-sucrose 침지, $^14$$CO_2$의 지엽 또는 이삭 조사로서 동화물질의 source를 달리하였을 때 grain sink의 기능을 종실성숙의 정도, 소수의 수, 종실의 위치를 비교하여 검토하고, 절엽 및 제영처리를 하여 source와 sink간의 균형을 변화시켰을 때 종실중에 미치는 영향을 조사하였다. 1. 절취된 이삭의 하부에 $^14$C-sucrose를 침지하였을 때 종실로 $^14$C물질의 전류는 개화후 15일까지 직선적으로 상승하고 18일까지 급격히 하락하여 종실중의 증가보다 빨리 시작하고 먼저 끝나는 경향을 보였다. 하위절위 종실이 상위절위보다 $^14$C의 전류가 높았는데 이는 등숙의 진행이 늦은 때문이었으며 일차영화는 이차영화보다 높은 sink의 기능을 보였다. 2. 식물체에$^14{CO}_2$를 조사하였을 경우 이삭조사가 지엽조사보다 전류률이나 종실당 specific activity에서 3배 이상 높게 나타나 이삭이 종실의 등숙에 보다 효과적인 source임을 보여주었다. 종실당 specific activi쇼는 sink인 소수의 수의 영향보다 source의 종류에 따라 크게 달라졌으며 source의 activity가 큰 순서인 이삭의$^14$C-sucrose 침지 > 이삭의 $^14$$CO_2$ 조사 > 지엽의 $^14$$CO_2$ 조사 순으로 나타났다. 3. 절엽 및 제영처리로서 source/sink ratio를 변화시켰을 때 source/sink ratio가 감소함에 따라 종실중이 감소하였으며 엽면적과 소수의 수를 동시에 반감하였을 때 정상식물의 종실중과 차이가 없었다. 모든 잎을 제거하였을 때도 종실중에서 16% 감소에 불과하여 이삭의 동화작용이 크게 기여하는 것으로 보인다.

  • PDF

등숙기 온도에 따른 쌀가루 가공용 벼의 등숙특성 변이 구명 (Effects of Temperature on Grain Filling Properties of Rice Flour Varieties during the Ripening Stage)

  • 양서영;황운하;정재혁;이현석;이충근;최명구
    • 한국작물학회지
    • /
    • 제66권1호
    • /
    • pp.1-7
    • /
    • 2021
  • 쌀가루용 품종의 등숙기 온도에 따른 등숙특성 변이를 구명한 내용은 다음과 같다. 1. 고온(28℃)에서는 바로미2의 천립중이 21% 감소하면서 새누리(6% 감소)와 설갱(12% 감소)에 비해 크게 줄어들었으며, 전분함량의 감소 또한 바로미2에서 10% 이상으로 새누리와 설갱의 1~3% 감소와 대비되었다. 2. 저온(18℃)에서는 새누리나 설갱에 비해 바로미2의 등숙 속도가 매우 감소하였으며 특히 등숙 초반에 종실중의 증가가 매우 느렸다. 그러나 최종 천립중 및 전분함량은 22℃보다도 약간 증가하며 다른 품종과도 비슷한 것을 확인하였다. 3. 앞서 언급한 것처럼 쌀가루 가공용 품종 중 분질미(바로미2)는 등숙기 온도에 민감하기 때문에 추후 분질미 재배시 등숙기에 고온을 피할 수 있도록 이앙시기를 늦추는 편이 좋으며, 다만 과도하게 늦출 경우 저온조건에서 등숙기간을 제대로 확보하지 못하여 등숙이 충분히 되지 않을 수 있기 때문에 주의가 필요하다.

벼 무논점파재배와 이앙재배의 생육, 출수 및 등숙특성 비교 (Comparisons of Growth, Heading and Grain Filling Characteristics between Wet-hill-seeding and Transplanting in Rice)

  • 손지영;이충근;김준환;윤영환;양원하;최경진;최민규;박홍규;고종철;김연규;김정곤;양운호
    • 한국작물학회지
    • /
    • 제57권2호
    • /
    • pp.151-159
    • /
    • 2012
  • 최근 개발된 직파재배의 일종인 무논점파는 무논점파기(8조식, $15{\times}28cm$, 주당 5~8립)를 이용하여 파종하므로 이앙재배의 재식거리와 유사한 밀도를 유지할 수 있는 장점이 있다. 벼 무논점파재배의 생육 및 출수특성과 출수일변동에 따른 등숙율과 완전립율의 변이를 알아보고자 국립식량과학원 답작과 논포장(수원)에서 2009년부터 2011년까지 3년동안 본 시험을 수행하였다. 1. 무논점파는 입모수는 기계이앙의 재식밀도와 큰 차이가 없었으나 분얼수가 많아 최고분얼기에 단위면적당 경수는 기계이앙의 1.3~2배였다. 최고분얼기 이후 분얼수는 감소해 성숙기 이삭수는 기계이앙과 큰 차이가 없었다. 2. 무논점파의 출수전 생육일수는 운광벼 84일, 호품벼 98일로 기계이앙의 파종일로부터 14일, 19일의 재배기간이 단축되었다. 3. 무논점파의 성숙기 생육특성은 간장과 수장 및 면적당 이삭수는 기계이앙과 차이가 없었다. 통계적 유의성은 없었으나 수당립수는 많아지는 경향이었다. 4. 출수기는 무논점파가 이앙보다 운광벼는 9일, 호품벼는 3일 늦어졌는데 호품벼의 연차간 변이가 작았다. 호품벼는 출수기간이 기계이앙보다 2일 짧아 동시출수율이 높았다. 4. 무논점파재배시 출수일변이에 따른 등숙율과 현미완 전립율은 기계이앙과 차이가 없거나 오히려 높은 것으로 나타났으나 조생종인 운광벼보다 중만생종인 호품벼의 연차간 변이가 적어 무논점파 안정성이 우수한 것으로 나타났다.

등숙기 일사 저하가 쌀 수량 및 품질에 미치는 영향 (Effect of Low Radiation During Grain Filling Stage on Rice Yield and Grain Quality)

  • 김기영;고종철;신운철;박현수;백만기;남정권;김보경;이점호
    • 한국작물학회지
    • /
    • 제59권2호
    • /
    • pp.174-180
    • /
    • 2014
  • 등숙기 일조부족이 수량 및 수량구성형질, 쌀의 이화학적 특성 및 식미치에 미치는 영향을 분석하고자 자연광을 대비하여 35%, 55% 차광 처리한 결과는 다음과 같다. 1. 등숙기 차광처리에 의해 미품, 호품, 신동진의 등숙률, 현미천립중, 쌀 수량은 감소하였고 차광정도가 클수록 높은 감소율을 보였다. 2. 차광처리시 백미 단백질 함량은 증가하였고 35% 차광보다 55% 차광에서 높았으며, 미품이 호품과 신동진에 비해 단백질 함량의 변화가 적었다. 3. 차광처리시 아밀로스 함량 변화는 없었으나 식미치는 차광정도가 높을수록 감소하였고 미품이 신동진과 호품에 비해 변화가 적었다. 4. 차광에 의해 최고점도, 최저점도, 최종점도 및 강화점도는 낮아지고 호화온도와 치반점도는 높았다.

유기물 첨가제와 펄스-역펄스 전착법을 이용한 구리 Via Filling에 관한 연구 (Copper Via Filling Using Organic Additives and Wave Current Electroplating)

  • 이석이;이재호
    • 마이크로전자및패키징학회지
    • /
    • 제14권3호
    • /
    • pp.37-42
    • /
    • 2007
  • 반도체 소자의 집적도가 높아짐에 따라 3D SiP에 대한 관심이 높아지고 전기도금법을 이용한 구리 via filling이 활발히 연구되어왔다. Via filling시 via 입구와 바닥에 전류밀도 차이로 인해 via 내부에 결함이 발생하기 쉽다. 여러 가지 유기물 첨가제와 전류인가 방식의 변화를 통한 via filling을 하였다. 첨가된 유기물은 PEG, SPS, JGB, PEI를 사용하였다. 유기물이 첨가된 용액을 이용하여 펄스와 역펄스 방법을 이용하여 via filling을 하였다. 유기물의 첨가에 따른 도금된 구리 입자의 크기 및 형상에 관하여 고찰하였으며 도금 후 via 시편의 단면을 FESEM으로 관찰하였다. JGB에 비하여 PEI를 사용한 경우 치밀한 도금층을 얻을 수 있었다. 2 step via filling을 사용한 경우 via filling 시간을 단축시킬 수 있었다.

  • PDF

Relationship between rice grain quality traits and starch pasting properties using early maturing rice cultivars in Chungnam plain area

  • Yun, Yeo-Tae;Chung, Chong-Tae;Lee, Jae-Chul;Lee, Young-Ju;Na, Han-Jung;Lee, Kwang-Won;Yoon, Young-Hwan
    • 농업과학연구
    • /
    • 제42권3호
    • /
    • pp.151-158
    • /
    • 2015
  • This study was conducted to know the variation and relationship of rice grain quality and starch pasting properties by transplanting times. Two early maturing rice cultivars which accounted for the most area of early maturing rice cultivar in Chungnam province were used. The experiment was laid out in a split-plot design with 3 replications. The main plot consisted of three transplanting times viz. early (April 25), ordinary (May 25) and late (June 25) with sub-plots containing two cultivars. According to the transplanting times, most of rice grain quality and starch pasting properties showed significant difference and Joami showed higher grain quality than Unkwang in all transplanting times. Especially, rice grain quality was improved when transplanted late, showing high head rice and glossiness of cooked rice due to the lower mean temperature during grain filling stage. Glossiness of cooked rice was positively correlated with head rice ratio, amylose content and setback value, and negatively correlated with chalky rice ratio and protein content. The highest positive and negative correlation were observed between breakdown value and peak viscosity ($r=0.98^{**}$), and breakdown and setback ($r=-0.94^{**}$), respectively. These results provide some information for rice researchers and producers producing cultivars with an improved quality, suggesting that rice quality is highly influenced by temperature at grain filling stage, and transplanting times is crucial in improving rice quality. In addition, starch pasting properties are useful for determining rice quality because rice grain quality and starch pasting properties are dependent on each other.

Comparison of Yield and Growth Characteristics of Korean High Yielding Cultivars and IRRI's New Plant Type Rice Line

  • Lee, Byun-Woo;Ha, Jong-Ryuk
    • 한국작물학회지
    • /
    • 제44권1호
    • /
    • pp.59-63
    • /
    • 1999
  • Yield and growth characteristics were compared for five rice cultivars; a new Tongil-type, so called "super-rice", Dasanbyeo, an old Tongil-type Milyang 23, two japonicas Dongjinbyeo and Ilpumbyeo, and a new plant type (NPT)line IR65600-27-1-2. The objective of this stusy was to clarify the high yielding capacity of Dasanbyeo in terms of growth characteristics. The average grain yield (9 t/ha) of Dasanbyeo was higher than that of Milyang 23 by ca. 9% that of japonicas by 20 to 30%, and that of NPT line by ca. 100%. The higher grain yield of Dasanbyeo was attributable not only to the greater dry matter production but also to the higher harvest index (HI). Dasanbyeo showed the greatest dry matter at harvest owing not only to the rapid leaf expan-sion at early growth stage and the resulting high LAI through the entire growth stage but also to the high NAR despite the high LAI. The rapid leaf expansion of Dasanbyeo at early growth stage seemed to be related in part to the profuse tillering capacity. HI was 0.53 in Dasanbyeo, 0,51 in Milyang 23, 0.41 in japonicas, and 0.35 in NPT line. Dasanbyeo was indebted for its higher HI to the relatively high grain filling ratio in spite of a much greater sink size than the other cultivars. Dasan had a greater source to sink ratio during grain ripening as measured by LAD/spikelet and dry matter production/spikelet which showed positove correlations with the grain ripening ratio. New plant type (NPT) line showed the lowest grain yield owing to the small sink size and the low grain filling ratio which seemed to have resulted from the abundant occurrence of weak-strength spikelets. The weak sink strength, in turn, seemed to have suppressed photosynthesis during the grain ripening stage.

  • PDF

보리 출수기와 성숙기의 유전분석 및 내동성과의 관계 (Genetic Analyses of Heading and Maturing Dates and Their Relationship to Freezing Resistance in Barley)

  • 천종은;강석원
    • 한국작물학회지
    • /
    • 제47권6호
    • /
    • pp.395-401
    • /
    • 2002
  • 보리의 조숙 품종을 육성하기 위해서는 조기 출수인자에 단기 등숙성 인자를 도입하는 것이 중요하므로 출수기, 성숙기 및 등숙기간의 유전에 관한 정보를 얻고자 4개 품종(사천6호, 오월보리, 동보리1호, Reno), F$_1$, F$_2$세대의 종자를 포장에 파종, 재배하여 출수기, 성숙기 및 등숙기간을 조사하였다. 1. 출수기는 4월 3일-4월 26일, 성숙기는 5월 15일-5월 27일, 등숙기간은 31일-42일로 교배친 및 F$_1$ 조합간 차이가 현저하였다. 2. 부분 이면교잡에 의한 분산분석 결과, 출수기에 대해서 동보리1호(출수기 늦음)는 우성으로, 오월보리는(출수기 빠름) 열성으로, 출수기 유전은 유전자의 상가적 작용이 큰 부분우성으로 나타났다. 3. 성숙기에 대해서 동보리 1호가 우성으로, 오월보리가 열성으로, 성숙기 유전은 유전자의 상가적 작용 큰 부분우성으로 나타났다. 4. 등숙기간에 대해서 Reno(등숙기간이 짧음)가 우성으로 오월보리(등숙기간이 길음)은 열성으로 유전자의 상가적 작용이 큰 부분우성으로 나타났다. 5. 출수기, 성숙기에 대한 일반조합능력의 분산량은 고도의 유의성이 인정되고, GCA분산이 SCA분산보다 출수기는 10.1-29.5배, 성숙기는 9.9-121배 높아서 유전자의 상가적 작용이 컸으며, 사천6호와 오월보리는 출수와 성숙이 빠른 방향으로, 동보리 1호와 Reno은 늦어지는 방향으로 효과를 보였다. 6. 등숙기간에 대해선 GCA 효과는 F$_1$과 F$_2$ 세대간 유의적 차이가 있었고 GCA/SCA비가 크므로 유전자의 상가적 작용이 현저하였다. 7 포장 출수기, 성숙기는 결빙방지 단백질의 농도, 광합성의 광저해에 대한 내성, 포장 내동성과 고도의 정의 상관을, 등숙기간은 각 형질들과 부의 상관을 보였다. was "glossy and smooth" in all cases and preference about the texture was high. The Doenjang with added P. japonica Powder had a saltier taste and the Doenjang with P. japonica Powder had the least sweet taste. In the flavor and overall Preference, the Doenjang with P. japonica powder was the lowestEX>로 측정되었고, 계사내 지붕의 표면 온도는 최고 $29^{\circ}C$가 측정되었다. 계사 내 표면 온도 및 닭의 표면 온도는 계사내 공기온도의 영향을 많이 받는 것으로 나타났다.ill in a good agreement with those predicted by Rohsenow's formula, which was based on nucleate boiling. For the condenser, the wall temperatures were practically uniform, and the measured values of condensation heat transfer coefficient were 1.7 times higher than the predicted values obtained from Nusselt's film condensation theory on tilted plate. Using those two expressions, a correlation was formulated as a function of heat flux and tilt angle, to determine the total thermal resistance of a tilted thermosyphon.