• 한국지형학회지
• /
• 제26권2호
• /
• pp.15-27
• /
• 2019

This study tries to reveal transport mechanism and origin of components from fluvial terrace deposits in Danyang and Geum River basins, through grain size partitioning using the Weibull function. Grain size parameters suggest that the samples analyzed in this study can be grouped into the coarse, fine and medium samples. The coarse samples are partitioned into three or four components. More than 65% of the coarse samples consist of components by suspension and saltation by fluvial process, while components by attachment to coarse grains or aggregates and/or by individual grains deposited under non-flow condition are also found in the coarse samples. The fine samples consist of four components and components found in loess deposits in Korea occupy >70%, suggestive of the same transport mechanisms (westerlies and winter monsoon) and common source areas with loess deposits in Korea. However, components by aeolian process from local sources as well as by fluvial process are also found in the fine samples. The medium samples are partitioned into components with similar sizes to the coarse and fine samples, respectively.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.234-234
• /
• 2017

Recent abnormal weather, especially continued rainfall during sowing season causes difficulty in proper sowing of wheat and delayed sowing after November 15 is concerned about freezing damage during winter, resulting in reduction of wheat yield. To correspond government policy of crop sufficiency improvement and produce and supply raw wheat and barley steadily, expansion of cultivation area is necessary and spring sowing of wheat is required. To obtain basic information on the improvement of spring sown wheat and barley production, comparison and path coefficients analysis was conducted for yield and yield related components from autumn and spring sown wheat and barley. Path analyses were known as very useful in clarifying the effects of yield components on grain yield formation, which were not accurately reflected in simple correlation anaylses. Most cultivated 5 wheat and 9 barley cultivars were sown on October and February at Cheon-ju province according to standard sowing method. For the spring sowing of wheat and barley, the varieties having vernalization degree I~III are seeded in the mid of February and seeding rate is 200~250kg/ha which is increased by 25% than autumn sowing. N-fertilizer of 95 kg/ha and the same amount of P, K dressed in autumn are applied at once as basal fertilizer. The magnitude of direct effect in each yield components on yield was in sequence as follows. In autumn wheat, grain number per $spike{\geq}$ the number of spike per $m^2$>1000-grain weight and in spring wheat, grain number per $ spike{\geq}the$ number of spike per $m^2$> 1000-grain weight. In autumn naked barley, 1000-grain weight> the number of spike per $m^2$, grain number per spike and in spring barely, the number of spike per $m^2$> grain number per spike > 1000-grain weight. In autumn covered barley, grain number per spike>the number of spike per $m^2$ and in spring coverd barley, the number of spike per $m^2$> grain number per spike, 1000-grain weight. In autumn malt barley, the number of spike per $m^2$>1000-grain weight and in spring malt barley, the direct effects of three yield components were similar. According to the path analysis of yield components for spring sown wheat and barley, it was suggested that adequate number of spike per $m^2$ was most important factor for yield increase.

• 한국자원식물학회지
• /
• 제11권1호
• /
• pp.64-69
• /
• 1998

This experiment was conducted to investigatd the variation of some apearance chemical components at National Honam Agricultural Experiment Station in Korea. the treatements consisted of five transplating times, form May 5 to July 5 at 15-day interval , and six cultivars ; two early-maturing, two mid-maturing and two latematuring cultivars. The results showed that the variatio of grain appearance such as length-wide ratio was not significantly different in early -maturing cultivars, but mid-and late-maturing cultivars made slightly a round shape of grain in case of early transplanting. Percentage of complete grain was found to be high at transplanting of MAy 20 inearly-maturing cultivars and on June 5 in mid-and late-maturing ones. PERcentage of existed embryo after milling showed high at early transplanting of May 5 for early -maturing cultivars, and at the late transplanting of June 5 in early and late maturing one. The chemical components of rice grain showed high in protein , lipid,ash and amylose content inthe earlier transplanting, and also revealed high in carbohydrates, magnesium and potassium in the later transplanting of all cultivars.

• 한국정밀공학회지
• /
• 제15권4호
• /
• pp.44-50
• /
• 1998

The creep life fraction can be evaluated by the degree of grain deformation since the grain of Cr-Mo base metal deforms in the direction of stress. The grain deformation method using image processing technique is developed for life assessment of in-service high-temperature components. The new assessment model of grain deformation method is presented to apply to in-service components and is verified by interrupted creep test for ex-serviced material of 1Cr-0.5Mo steel. The proposed model, which is irrespective of stress direction, is to evaluate mean of the absolute deviation for the measured ratios which are diametrical maximum to minimum dimensions for grains.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.354-354
• /
• 2017

Rice grain yield is determined by crop dry matter production that is sensitive to temperature. Our objective was to determine whether the difference in temperature between years had an impact on the relationship between yield components and grain yield. Field experiments were conducted under machine transplanting cultivation by using yield data of two japonica rice varieties, Odaebyeo (early maturing) and Nampyeong (mid-late maturing), in 2013 to 2016 in Suwon, Korea. Plant height, dry weight, and yield components were examined by analysis of variance, correlation. The milled rice yield of the two varieties were the highest in 2016, however the lowest yields were observed in the different years. In 2016, Odaebyeo produced $0.96t\;ha^{-1}$ greater milled rice yield than in 2015, and Nampyeong produced $1.11t\;ha^{-1}$ greater yield than in 2013. The correlation analysis indicated that spikelet per panicle (R = 0.53) was associated with grain yield of Odaebyeo. In Nampyeong, biomass at heading date (R = 0.74), 1000-grain weight (R = 0.71), spikelet per panicle (R = 0.58), and panicle number per $m^2$ were associated with grain yield. Sink size (spikelet number per $m^2$) of the two varieties responded to accumulative temperature from transplanting to panicle initiation stage. In this experiment, optimal accumulative temperature before panicle initiation has effect on increased spikelet number and/or number of panicle that were mainly responsible for yield difference. Rice production research to increase grain yield should consider all yield components, but increased emphasis on biomass production before heading is also necessary as well as grain ripening conditions.

• 대한기계학회논문집A
• /
• 제27권1호
• /
• pp.109-118
• /
• 2003

The recent trend towards miniaturization causes an increased demand for parts with very small dimensions. Milli-structure components are classified as a component group whose size is between macro- and micro-scale. The manufacturing process of these components of thin sheet metal forming has a microscopic properties in addition to a typical phenomenon of bulk deformation because of the forming size. Also, the material properties and the deformation behavior change with miniaturization, which means that, a coarse grained materials show a higher resistance against deformation, when the grain size is in the range of the sheet thickness. In this study, a new numerical approach is proposed to simulate intergranular milli-structure in forming by the finite element method. The grain element and grain boundary element are introduced to simulate the milli-structure in the bending. The grain element is used to analyze the deformation of individual grain while the grain boundary element is for the investigation on the movement of the grain boundary. Also, the result of the finite element analysis is confirmed by a series of milli-sized forming experiments.

• 한국해양학회지
• /
• 제28권2호
• /
• pp.114-120
• /
• 1993

입도분포의 특징분석에 종래의 조직특성치 대신 수치해석적인 분해법의 적용을 시 도하였다. 그 결과 이 방법이 제주해협의 대륙붕 표층퇴적물과 같은 복모드형 입 도분포의 분석에 매우 유용함이 입증 되었다. 복모드형 입도분포 퇴적물은 제주해협 대륙붕에서는 86%의 높은 비율을 점한다. 종래의 입도특성치(평균, 표준편차, 왜도, 첨도)는 복모드형 입도분포에 대해서는 왜곡된 값을 보인다. 따라서 입도분포의 모드 에 대체로 대응되는 정규성분으로 분해해서 각 정규성분의 특성치를 해석함으로써 입 도특성치에서와 같은 특징의 누락이나 왜곡을 피할 수 있다. 제주해협 대륙붕의 167개 퇴적물 입도분포곡선을 비선형 최소자승법을 사용하여 정규성분으로 분해해서 총 387 개의 정규성분을 얻었다. 정규성분의 평균은 1-3 phi 8-9 phi에 집중되는 것이 많다. 이중 조립질 정규성분의 평균치는 복잡하고 특징적인 지리적 분포를 보인다. 이러한 분포는 퇴적물 총층후 분포와 매우 유사하며 해저면의 지질과 지형을 면밀하게 반영하 고 있다. 해저면을 형성하는 퇴적층은 플라이스토세 후기의 해침성 모래층이며 해저지 형은 플라이스토세말 빙하기 저해수면시기의 침식에 의해 형성된 것으로 보인다.

• 한국작물학회지
• /
• 제51권4호
• /
• pp.269-273
• /
• 2006

Multiple linear regression analysis was conducted to interpretate the relationship between sesame grain yield and its components under early sowing cropping condition. The t test showed that stem length, number of capsules per plant, 1000 seeds weight and seed weight per plant gave significant contribution to sesame grain yield, therefore those variables were assumed to mostly influenced components to grain yield of sesame. In the stepwise regression analysis, the predicted equation for sesame grain yield per square meter (Y) was Y = -7.900 + 0.150X1 + 0.461X5 + 15.553X6 + 8.543X7. Meanwhile, F value showed that stem length, number of capsules per plant and seed weight per plant gave significant contribution to sesame grain yield, while 1000 seeds weight did not significantly show. Based on the results, it is reasonable to assume that high yield. potential of sesame under early sowing cropping condition would be obtained by selecting breeding lines with long stem length, number of capsules per plant, and seed weight per plant, which was different result at the late sowing cropping condition in which days to flowering and maturity were assumed to be more affected factors to the sesame grain yield.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2002년도 금형가공 심포지엄
• /
• pp.266-273
• /
• 2002

Milli-structure components are classified as a component group whose size is between macro and micro scales, that is, about less than 20mm and larger than 1mm. The bending of these components of thin sheets has a typical phenomenon of bulk deformation because of the forming size. The recent trend towards miniaturization causes an increased demand for parts with very small dimensions. The conceptual miniature bending process enables the production of such parts with high productivity and accuracy. The stress values of the flow curve decrease with miniaturization, which means that coarse grained materials show a higher resistance against deformation, when the grain size is in the range of the sheet thickness. In this paper, a new numerical approach is proposed to simulate intergranular milli-structure in forming by the finite element method. The grain element and grain boundary element are introduced to simulate the milli-structure of strip in the bending. The grain element is used to analyze the deformation of individual grain while the grain boundary element is for the investigation on the movement of the grain boundary. Also, the result of the finite element analysis is confirmed by a series of milli-sized forming experiments.

• 한국자원식물학회지
• /
• 제9권1호
• /
• pp.77-87
• /
• 1996