• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 2000.06a
• /
• pp.1-33
• /
• 2000

Silicon carbide ceramics with sintering additives from the system AlN-Y$_2$O$_3$ can be gas-pressure sintered to theoretical density. While commonly a combination of sesquioxides is used such as Al$_2$O$_3$-Y$_2$O$_3$, the oxynitrid additives offer the advantage that only a nitrogen atmosphere is require instead of a powder. By starting form a mixture of ${\beta}$-SiC and ${\alpha}$-SiC, and by performing dedicated heat treatments after densification, anisotropic grain growth is obtained which leads to a platelet microstructure showing enhance fracture toughness. In the present work, recent improvement of the mechanical behaviour of these materials at ambient and high temperatures is reported. By means of a surface oxidation treatment in air it is possible to obtain four-point bending strengths in excess of 1 GPa, and the strength retention at high temperatures is significantly improved.

• Journal of the Korean Ceramic Society
• /
• v.34 no.6
• /
• pp.583-590
• /
• 1997

The effects of Mn2O3 and Y2O3 additives on the microstructure and dielectric properties of Sr(Zr, Ti)O3 have been investigated. Powders with Sr(Zr1-xTix)O3(0$\leq$x$\leq$0.1) composition were prepared by the conventional solid state processing from commercial TiO2 and precipitation-processed ZrO2. The powders containing sintering additives of Mn2O3 and Y2O3 were compacted and then sintered at 1,55$0^{\circ}C$ for 4 h to get>97% relative density. Mn2O3 suppressed the grain growth and Y2O3 enhanced the density of sintered body. The oxidation state of Mn ions were determined by a chemical wet method and EPR spectroscopy. Mn ions were present as Mn2+ and Mn4+ in SrZrO3, while as Mn3+ and Mn4+ in Ti-substituted Sr(Zr, Ti)O3. With the substitution of Ti, the lattice parameters of SrZrO3 decreased and its dielectric constant increased with remarkable decrease in Q value. The dielectric constant of Sr(Zr, Ti)O3 was in the range of 30 to 40, Q values 1,200~5,400 at 6 GHz and temperature coefficient of resonant frequency -67~100 ppm/K.

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.4_2
• /
• pp.669-674
• /
• 2020

Liquid-phase-sintered (LPS) SiC materials were briefly examined with their microstructure and mechanical property. Especially, effect of high-temperature exposure on the tendency of fracture toughness of LPS-SiC were introduced. The LPS-SiC was fabricated in hot-press by sintering powder mixture of sub-micron SiC and sintering additives of Al₂O₃-Y₂O₃. LPS-SiC represented dense morphology and SiC grain-growth with some amount of micro-pores and clustered additives as pore-filling. The strength of LPS-SiC might affected by distribution of micro-pores. LPS-SiC tended to decrease fracture toughness depending on increasing exposure temperature and time.

• Journal of the Korean Ceramic Society
• /
• v.35 no.9
• /
• pp.911-916
• /
• 1998

By using {{{{ { { {Y }_{3 }Al }_{5 }O }_{12 } }} (YAG) and SiO2 as sintering additives the effect of the composition of sintering ad-ditives on microstructure and mechanical properties of the hog-pressed and subsequently annealed SiC ma-terials were investigated. Microstructures of sintered and annealed materials were strongly dependent onthe composition of sintering additives. The average diameter and volume fraction of elongated grains in an-nealed materials increased with the SiO2/YAg ratio while the fracture toughness increased with the SiO2/YAg ratio. The average MPa.{{{{ { m}^{1/2 } }} respectively. Typical strength and fracture toughness of an annealed material with SiO2/YAg ra-tionof 0.67 were 371 MPa and 5.6 MPa.{{{{ { m}^{1/2 } }} respectively.

• Journal of the Korean Ceramic Society
• /
• v.14 no.3
• /
• pp.182-186
• /
• 1977

Compression creep of polycrystalline magnesia at about 1$600^{\circ}C$ under 5-40kg/$\textrm{cm}^2$ was examined, and also the effects on it of minor additives such as B2O3, CaO and SiO2 were examined. The high temperature creep of high purity magnesia was primarily controlled by the Nabarro-Herring type lattice diffusion of Mg in magnesia. B2O3 was included in the molten state and showed on increasing B2O3 contents. Some of the CaO and SiO2 were also included in the molten state, promoted the grain boundary sliding, so that creep rate was increased with an increasing content of them.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1993.05a
• /
• pp.109-112
• /
• 1993

In this paper, We have studied about the microstructure of the piezoceramics PZT that were added with some kinds of additives, such as Niobium(Nb), Iron(Fe) or Manganese(Mn). The grain size of PZT ceramics was decreased with increasing the amounts of additive of Nb or Fe, while increased with increasing Mn. The curie temperature was changed slightly for the PZT ceramics containing $Fe^{3+}$, which is not dependent on the amounts, but $Nb^{5+}$ or $Mn^{2+}$ ion added PZT was lowered. The resistivity was increased with increasing the amounts of $Nb^{5+}$ additive, while decreased for $Mn^{2+}$ additive.

• Journal of the Korean Ceramic Society
• /
• v.17 no.3
• /
• pp.145-150
• /
• 1980

This paper deals with the clay-bonded silicon carbide refractory saggars in terms of its oxidation resistance. Oxidation is one of the major causes of failure in silicon carbide refractory saggars during its services. Various anti-oxidation additives are coated on or added into silicon carbide refractories and their effects are studied while other conditions are equal. Several conclusions can be derived for optimum anti-oxidation additive as: 1. The additive should wet each silicon carbide grain completely during its firing. 2. The additive should have high viscosity at temperatures around $1, 350^{\circ}C$ where most silicon carbide refractory saggars are being used. 3. The additive should have ability to absorb or desorb oxygen depending on the local atmosphere inside of saggar during it service. 4. The addition should be kept as minimum as possible to prevent any "sweating" or "bloating" phenomena.ing" phenomena.mena.

• Journal of the Korean Ceramic Society
• /
• v.30 no.12
• /
• pp.1029-1038
• /
• 1993

The microstructures of aluminas, included of dissolved CaO as $\alpha$-alumina seeded pseudo-boehmite hydrosol was gelled in plaster mold and doped of MgO as dipping of calcines(120$0^{\circ}C$-2h) into Mg-nitrate solution, were compared to the one of which additives are excluded during the gellation. It was formed the boundary layer of 300~350${\mu}{\textrm}{m}$ distance from surface to the inside, containing of approximately 500ppm CaO by dissolved Ca from plaster mold. As the MgO addition to the boundary layer with dissolved CaO, the microstructure of the layer was uniformed and inhibited the grian growth, compared to one of that additives be excluded specimen and of MgO doped-inside region. This result was considered as abnormal grain growth and effect of flat boundary formation be appeared by effects of dissolved CaO, were decreased by MgO co-doping.

• Journal of the Korean Ceramic Society
• /
• v.28 no.5
• /
• pp.359-364
• /
• 1991

The effects of Pb5Ge3O11 on the sinterbility and lattice variation of the semiconducting 0.15 mol% Y2O3 doped BaTiO3 have been investigated as functions of additive contents (from 0.25 mol% to 2.5 mol%) and sintering temperatures (from 110$0^{\circ}C$ to 130$0^{\circ}C$). As the amount of Pb5Ge3O11 increases, the sinterbility of BaTiO3 increases abruptly at around 115$0^{\circ}C$. During the sintering, the most of Pb+2 ions in additives penetrate into BaTiO3 lattices and Ge+4 ions present at grain boundaries. Therefore the c lattice of the BaTiO3 increases largely and then the tetragonality increases due to the diffusion of the Pb+2 ions.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.374-378
• /
• 1999

Thin Films of BaYTiO system were Prepared by frequency (rf)/dc magnetron sputtering method. The preparation of target were accomplished by the mixed oxide method, and their composition consisted of the $Ba_{0.997}$ $Y_{0.003}$Ti $O_3$+0.5 $SiO_2$+x $M_{n}$O(x=0, 0.073, 0.1, 0.127, 0.154). The average particle size of (Ba,Y)Ti $O_2$ system ceramics with Mn $O_2$ additives increases as the amount of MnO additives increase and reaches the maximum grain growth when the amount of MnO is 0.127(mol%).).).).