• Fire Science and Engineering
• /
• v.28 no.6
• /
• pp.8-12
• /
• 2014

Interior finishing materials using noncombustible were regulated by the building codes to prevent the spread of fire and protect occupants. The average deed of stopping time of experimental mouse exposing combustion gas were measured by KS F 2271 gas toxicity test. At that time, The average deed of stopping time under 9 minutes were judged a inconsistence. This experiment method has limit to find out a cause of toxicity effect factor. In this study, particle size analysis were performed for investigate a major factor.

• Journal of the korean society of oceanography
• /
• v.35 no.4
• /
• pp.179-191
• /
• 2000

Both acid-leached and residual Pb in surface sediments of the Yellow Sea are analyzed in order to explain the spatial distribution of Pb contents and to determine a major controlling factor of its geographical distribution. Leached and residual Pb contents in surface sediments, which may have a different origin, show mirrored geographical distribution. Sediments with high residual Pb ( ${\sim}$20 ${\mu}$g/g; northeastern sand) contain low leached Pb (6-8 ${\mu}$g/g) while sediments with high leached Pb ( ${\sim}$20 ${\mu}$g/g; central mud) contain low residual Pb. As a result, total Pb shows little variation spatially. The mirrored distribution of both species also leads the grain-size dependence of Pb contents to be unclear although the grain-size dependence of other trace metals (Cr, Co, Ni etc.) has been well reported in this shelf. High leached Pb contents (>15 ${\mu}$g/g) were also observed in sediments off the Changjiang River mouth and off the Kyunggi Bay where they can be interpreted as the results of diagenetic accumulation and anthropogenic pollution, respectively. Residual Pb enriched in sands of the northeastern area might be from K-feldspar, which in turn allows the suggestion that northeastern sands may have originated from coastal erosion of granitic landmass or directly from nearby rivers.

• Corrosion Science and Technology
• /
• v.3 no.5
• /
• pp.198-208
• /
• 2004

Although there has been no general agreement on the mechanism of primary water stress corrosion cracking (PWSCC) as one of major degradation modes of Ni-base alloys in pressurized water reactors (PWR's), common postulation derived from previous studies is that the damage to the alloy substrate can be related to mass transport characteristics and/or repair properties of overlaid oxide film. Recently, it was shown that the oxide film structure and PWSCC initiation time as well as crack growth rate were systematically varied as a function of dissolved hydrogen concentration in high temperature water, supporting the postulation. In order to understand how the oxide film composition can vary with water chemistry, this study was conducted to characterize oxide films on Alloy 600 by an in-situ Raman spectroscopy. Based on both experimental and thermodynamic prediction results, Ni/NiO thermodynamic equilibrium condition was defined as a function of electrochemical potential and temperature. The results agree well with Attanasio et al.'s data by contact electrical resistance measurements. The anomalously high PWSCC growth rate consistently observed in the vicinity of Ni/NiO equilibrium is then attributed to weak thermodynamic stability of NiO. Redox-induced phase transition between Ni metal and NiO may undermine the integrity of NiO and enhance presumably the percolation of oxidizing environment through the oxide film, especially along grain boundaries. The redox-induced grain boundary oxide degradation mechanism has been postulated and will be tested by using the in-situ Raman facility.

• The Journal of the Petrological Society of Korea
• /
• v.20 no.1
• /
• pp.61-75
• /
• 2011

Mantle-derived xenoliths, corresponding to spinel harzburgite and lherzolite in alkali basalts from Jeju Island, are metasomatized to various extents. They contain distinctive secondary orthopyroxene, forming corona or poikilitic textures. It clearly indicate that this secondary orthopyroxene has been produced at the expense of olivine along the grain boundaries and margins, suggesting silica-enriched metasomatic melt infiltrated through grain boundaries. Based on the geotectonic characteristics of Jeju Island and textural characteristics and major elements composition of mantle xenoliths, it is suggested that the silica-enriched melt/fluid could have derived from the ancient subducted slab, possibly in the mantle wedge, implying that the high $SiO_2$ activity in the lithospheric upper mantle beneath Jeju Island at that time.

• Journal of Life Science
• /
• v.13 no.6
• /
• pp.757-763
• /
• 2003

In order to establish the optimal soil moisture, seeding date and nitrogen fertilization, yield and its components grown at 3 different seeding dates and 2 nitrogen fertilizations were compared and analyzed in adaly(Coix lachyma-jobi L. var. mayuen). The results are summarized as follows: Heading date and maturity date were earlier in early seeding date than in late seeding date. Days to heading was shortened as the seeding date was late. Stem length, stem diameter, and tiller number were increased in irrigation than control, and were decreased as the seeding date was late. The top and the root dry weight were increased in irrigation than in control, and were decreased as the seeding date was late. Net photosynthetic rate was increased significantly in irrigation. Occurrance of leaf blight disease was much lower in irrigation than in control. 1000 grain weight and grain yield were higher in irrigation than in control, and were decreased as the seeding date was late. Rate of sterility was lower in irrigation than in control.

• Journal of the Korean Home Economics Association
• /
• v.26 no.4
• /
• pp.113-127
• /
• 1988

This paper attempts to investigate and analyze the change of the proportion of discretionary consumption expenditure (DCE) of main consumer goods among total household expenditure from 1964 to 1986 in Korea by reorganizing various data, particularly "Annual Report of Citizen's Household Experditure in Sooul".The result of the author's analysis can be summarized as follows. 1. The analysis shows that while the proportion of DCE in food has been increased during this period as the Korean economy developed, the value of income elasticity for beverages, liguor, out-door eating and processed food products which consist of major part of food, has been successively decreased. And also, though the absolute value of income elasticity for grain products has been increased, its proportion among total expenditure has been successively decreased. From these trends, we can conclude that general consumption pattern has a tendency to change from dependence on main grain products to the more utilization of out-door eating or processed food products. 2. The ratio of DEC of furnitures to housing expenditure has played a role of indicator of business cycle, reflecting the consumers' psychological expectation fro general economic trend. 3. In case of the proportion of DCE of clothes, there has been no great change. 4. As for as DCE of sundry expenditure is concerned, there has been no-great change in The proportion itself/ However. as the ratio of sundry expenditure to total household expenditure has been greatly increased, expenditure for leisure disproportionately increased. 5. The proportion of total DCE in total consumption expenditure, as in the case of housing, has been increased, which coincided exactly with business cyele appeared during this period. In fact, when Korea economy experienced a severe recession in 193 and 1980, that proportion deeply went down respectively, and again went up after those years. Accordingly, we can generalize that the size of DCE deperds on the formation of consumer's psychological expectation toward economy, which confirms George Katona's early proposition.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.9
• /
• pp.41-47
• /
• 1999

The scale of dendritic structure of a cast preform plays a key role in determining the mechanical properties of cast/forged products. In this study, casting experiments are carried out to reduce dendrite arm spacing (DAS) to smaller than 20 ${\mu}$m by increasing cooling rate of the mold and then to spheriodize dendritic structures by addition of alloying elements such as Zr and Ti-B. From the casting experiments, appropriate casting conditions for producing the cast preform of a motorcycle connecting rod are obtained. To obtain fine microstructures of the cast preform, mold temperature must set to be low whilst cooling rate being high. When cooling rate is 10 $^{\circ}C$/s, the size of DAS is 17.4 ${\mu}$m. And the degree of spheriodization of a grain in the cast preform is described by aspect ratio, which is defined as the ratio of major and minor radii of an elliptical grain. When 0.5% Zr and 0.24 % Ti+B are added to the molten aluminum alloy, the best aspect-ratio 0.75 is obtained. After forging the cast preform of a motorcycle connecting rod, the microstructure and mechanical properties of the cast preform are compared with those of the cast/forged product. Cast/forged products are superior in microstructure and in mechanical properties such as ultimate strength, elongation, and hardness.

• Korean Journal of Breeding Science
• /
• v.43 no.5
• /
• pp.383-390
• /
• 2011

Near-isogenic lines (NILs) carrying bacterial blight resistance genes (Xa4, xa5 and Xa21) were developed in japonica rice using Suweon345 as genetic background. NILs were selected by gene specific DNA markers and inoculation of K1 or K3a race. NILs conferring Xa4 were resistant to K1, K2, K3, and moderately resistant to K3a. NILs conferring xa5 were resistant to K1, K2, K3, and K3a. NILs having Xa21 were susceptible to K1, while resistant to K2, K3 and K3a. Target genes of NILs with the genetic background of Suweon345 were also confirmed by using eleven Philippines races and International Rice Bacterial Blight (IRBB) NILs carrying Xa4, xa5 and Xa21. All NILs had no significant difference from their recurrent parents in the major agronomic traits except for panicle length and brown rice 1,000 grain weight. Heading date of NILs ranged from Aug. 10 to Aug. 11, which was similar to that of recurrent parent, Suweon345. Culm length, number of grains per panicle and ratio of ripened grain of NILs were similar to those of Suweon345. Milled rice of NILs was ranged from 4.82 to 4.93MT/ha. These NILs will be useful for improving resistance to K3a race of bacterial blight pathogens in Korean japonica cultivars.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.2
• /
• pp.224-232
• /
• 2019

Objective: Apart from various climatic differences, corn harvest stage and varieties are two major factors that can influence the yield and quality of corn silage in the tropics. A study was conducted to determine the optimum harvest stage of four corn varieties for silage production in Malaysia. Methods: Corn was harvested at four growth stages; silking, milk, dough, and dent stages from four varieties; Sweet Corn hybrid 926, Suwan, breeding test line (BTL) 1 and BTL 2. Using a split plot design, the treatments were then analysed based on the plant growth performance, yield, nutritive and feeding values followed by a financial feasibility study for potential commercialization. Results: Significant differences and interactions were detected across the parameters suggesting varying responses among the varieties towards the harvest stages. Sweet Corn was best harvested early in the dough stage due to high dry matter (DM) yield, digestible nutrient, and energy content with low fibre portion. Suwan was recommended to be harvested at the dent stage when it gave the highest DM yield with optimum digestible nutrient and energy content with low acid detergent fibre. BTL 1 and BTL 2 varieties can either be harvested at dough or dent stages as the crude protein, crude fibre, DM yield, DM content, digestible nutrient and energy were not significantly different at either stage. Further financial analysis showed that only Sweet Corn production was not financially feasible while Suwan had the best financial appraisal values among the grain varieties. Conclusion: In conclusion, only the grain varieties tested had the potential for silage making according to their optimum harvest stage but Suwan is highly recommended for commercialization as it was the most profitable.

• Journal of The Geomorphological Association of Korea
• /
• v.25 no.2
• /
• pp.43-61
• /
• 2018

Heterogeneous sedimentary deposits with different soil colors and various degree of hardness are exposed in its foredune and tidal zone due to the effects of recently accelerated coastal erosion along the Ujeon Coast in Jeung-do, Shinan-gun. This study was conducted on the assumption that these sedimentary deposits were developed in different timing and environments. Thus, we can infer the geomorphic development processes of the area based on evidences like the physicochemical characteristics of each sedimentary layer. Several analysis of these sedimentary depositssuch as grain size analysis, X-ray Fluorescence Measurement (XRF), and Loss on ignition (LOI) were performed on central (Ujeon A) and southern (Ujeon B) parts of the Ujeon Coast. I found that the foredune sedimentary deposits have four stages of geomorphic development processes. In the initial stage of development, during the peak of the Last Interglacial Period (MIS 5e), basal deposits were accumulated in the low-energy environment of subtidal zones. In the second stage, during the Last Glacial Period (MIS 4~MIS 2), eolian sedimentary layers were developed by terrestrial aeolian processes by which fine materials were transported from the Yellow Sea which became a dry land exposed by lowered sea level. In the third stage, various mechanism existed for the formation of each sedimentary layer. In the region of Ujeon A, sedimentary layers were developed in the littoral zone environment dominated by marine processes during the maximum phase of transgression in the Holocene. Meanwhile, the region of Ujeon B began to form eolian sedimentary layers during MIS 2. In the last stage, thick coastal dune deposits, covered all over the Ujeon Coast. During the late Holocene (0.7~0.6 ka), terrestrial processes kept dominating the region, developing typical eolian sedimentary layers.