• 유통과학연구
• /
• 제12권5호
• /
• pp.71-80
• /
• 2014

Purpose - The object of this paper is to ascertain how Japan has become a powerful trader in the international grain market. A case in point is the world's third largest U.S. major grain trader, Gavilon, merged with general trading company Marubeni in 2012. What are Japan's strategies and their implications? Research design, data, and methodology - The study analyzed Japanese Ministry of Agriculture, Forestry, and Fisheries data, and data from daily and weekly papers. The paper employed various data and research methodologies. Results - The Lee Myeong-Bak government tried for three years to create a company similar to Cargill, but the project eventually failed. On the other hand, Japan has emerged as a leader in the international grain distribution market for the past 50 years, with the cooperation of government and private companies. Conclusion - The findings of this study show that Korea, China, India, and other countries' international major grain companies now compete to be powerful, major grain traders. South Korea could be the leader of the international grain market through the development of a more careful and long-term strategy.

• 한국가구학회지
• /
• 제17권4호
• /
• pp.49-57
• /
• 2006

Larix kaemferi is now a major economic kind of trees and is produced in large quantity every year. Thus, the study of Larix kaemferiis conducted to acquire the basic date of measures for the reasonable use, clarifying the relation with the compression strength parallel to grain according to anatomical properties by heartwood and sapwood, and earlywood and latewood. As the length of an earlywood tracheid and the radial wall thickness of earlywood and latewood tracheids increased, the compression strength rose, and as the height of uniseriate ray in cell number increased, the compression strength parallel to grain fell. The major anatomical factors effecting on the compression strength parallel to grain of heart wood were the radial wall thickness of a latewood tracheid and the length of a latewood tracheid, while in sapwood, the length of an earlywood tracheid and the radial wall thickness of earlywood and latewood tracheids were the major factor on it.

• Journal of Biosystems Engineering
• /
• 제41권2호
• /
• pp.93-97
• /
• 2016

Purpose: Grain slurry diet are described as food obtained from ground grain paste. They serve as highly nutritious food for both adults and infants in Nigeria because of their immense nutritive and economical value. However, the production of these grain slurry diets is confronted with challenges that have hampered their commercialization. This study examines the trends and constraints of grain slurry food processing in Kaduna State. Methods: A survey was conducted using a structured questionnaire to elicit information from 192 selected processors, including both men and women. The survey was structured in line with the study objectives. The information was collated and synopsized into frequency distribution. Results: These findings revealed that 80% of the respondents processed between 1.0 tons and 13.0 tons of grain slurry per month. More than 90% of the processors processed grain slurry into koko, kunu, agidi, and pito. Accordingly, 80% of the interviewed processors indicated that sieving is one of the major constraints. Furthermore, inadequate modern machinery required to perform this operation makes it highly discouraging. One of the major challenges faced by the grain slurry producers in Nigeria is the lack of processing machinery for most operations (39.1%), followed by the tedious processing nature (27.1%), high labor cost (18.1%), and lack of market (9.4%). The traditional method of grain slurry processing was more popular than using modern equipment, except milling (96.5%), which is the only mechanized unit operation in grain slurry processing. Conclusion: Grain slurry processing and marketing were found to be profitable. However, these limitations could extremely reduce the level of grain slurry production, processing, and economic returns, thereby affecting the general wellbeing of the processors. The study also raised concerns about the safety and hygiene associated with traditionally processed grain slurry diets in the investigated areas.

• 한국작물학회지
• /
• 제29권2호
• /
• pp.109-113
• /
• 1984

우리나라 벼 재배품종들의 천립중을 증대시켜 단위면적당 수량능력의 향상을 위한 기초자료를 얻고자 수집된 몇가지 대립종들의 수량성 및 주요특성을 소개하고자 시험한 결과 1. 벼알의 무게와 벼알의 길이, 너비, 두께는 유의한 정(+)의 상관을 보였으며 벼 알의 길이와 모양은 정(+)의 상관(r=0.5707 ${\ast}\;{\ast}$)을 보였다. 2. 우러나라 재배품종의 천립중보다 무거온 14대립종들의 천립중과 수당입수, 주당수수, 등숙비율, 총건물중, 정조중, 수확지수간에는 부(-)의 상관을 보였으나 유의성은 인정되지 않았다. 3. 이들 대립종의 천립중과 생육일수와는 부(-)의 상관을 보였으나 유의성은 인정되지 않았다. 4. 천립중이 상이한 20품종의 천립중과 심복백정도간에는 정(+)의 높은 유의 상관(r =0.8477${\ast}\;{\ast}$)이 인정되었다.

• Journal of Biosystems Engineering
• /
• 제41권4호
• /
• pp.408-417
• /
• 2016

Purpose: Yield monitoring systems are an essential component of precision agriculture. They indicate the spatial variability of crop yield in fields, and have become an important factor in modern harvesters. The objective of this paper was to review research trends related to yield monitoring sensors for grain crops. Methods: The literature was reviewed for research on the major sensing components of grain yield monitoring systems. These major components included grain flow sensors, moisture content sensors, and cutting width sensors. Sensors were classified by sensing principle and type, and their performance was also reviewed. Results: The main targeted harvesting grain crops were rice, wheat, corn, barley, and grain sorghum. Grain flow sensors were classified into mass flow and volume flow methods. Mass flow sensors were mounted primarily at the clean grain elevator head or under the grain tank, and volume flow sensors were mounted at the head or in the middle of the elevator. Mass flow methods used weighing, force impact, and radiometric approaches, some of which resulted in measurement error levels lower than 5% ($R^2=0.99$). Volume flow methods included paddle wheel type and optical type, and in the best cases produced error levels lower than 3%. Grain moisture content sensing was in many cases achieved using capacitive modules. In some cases, errors were lower than 1%. Cutting width was measured by ultrasonic distance sensors mounted at both sides of the header dividers, and the errors were in some cases lower than 5%. Conclusions: The design and fabrication of an integrated yield monitoring system for a target crop would be affected by the selection of a sensing approach, as well as the layout and mounting of the sensors. For accurate estimation of yield, signal processing and correction measures should be also implemented.

• 한국작물학회지
• /
• 제52권2호
• /
• pp.123-128
• /
• 2007

Demand for high quality rice has always been a major factor in the international rice marketing. In the present study, doubled haploid (DH) population derived from anther culture of a Tongil/japonica hybrid was used for genetic analysis of rice grain quality. The average values of DH lines for grain weight, grain length and the ratio of grain length to width were near the mid-parent value. More than 40% DH lines showed transgressive segregation for grain weight, length, amylose and lipid content, but less than 10% DH lines observed on ratio of length to width and grain thickness were transgressive segregation. Correlation analysis between appearance qualities and physicochemical characters indicated that grain width and grain thickness both significantly and negatively correlated to protein and lipid content. A highly significant negative correlation between protein content and amylose content was observed.

• 한국재료학회지
• /
• 제19권11호
• /
• pp.588-595
• /
• 2009

The knowledge of grain growth of carbide particles is very important for manufacturing micrograined cemented carbides. In the present study, continuous and discontinuous grain growth in WC-Co and WC-VC-Co cemented carbides is investigated using the Monte Carlo computer simulation technique. The Ostwald ripening process (solution/re-precipitation) and the grain boundary migration process are assumed in the simulation as the grain growth mechanism. The effects of liquid phase fraction, grain boundary energy and implanted coarse grain are examined. At higher liquid phase content, mass transfer via solid/liquid interfaces plays a major role in grain growth. Growth rate of the implanted grain was higher than that of the matrix grains through solution/re-precipitation and coalescence with neighboring grains. The results of these simulations qualitatively agree with experimental ones and suggest that distribution of liquid phase and carbide particle/carbide grain boundary energy as well as contamination by coarse grain are important factors controlling discontinuous grain growth in WC-Co and WC-VC-Co cemented carbides. The contamination by coarse grains must by avoided in the manufacturing process of fine grain cemented carbides, especially with low Co.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 D
• /
• pp.1361-1363
• /
• 1998

Poly-Si grain boundaries act as potential barriers as well as recombination centers for the photo-generated carriers in solar cells. Thereby, grain boundaries of poly-Si are considered as a major source of the poly-Si cell efficiency was reduced This paper investigated grain boundary effect of poly-Si wafer prior to the solar cell fabrication. By comparing I-V characteristics inner grain, on and across the grain boundary, we were able to detect grain potentials. To reduce grain boundary effect we carried out pretreatment, $POCl_3$ gettering, and examined carrier lifetime. This paper focuses on resistivity variation effect due to grain boundary of poly-Si. The resistivity of the inner grain was $2.2{\Omega}-cm$, on the grain boundary$2.3{\Omega}-cm$, across the grain boundary $2.6{\Omega}-cm$. A measured resistivity varied depending on how many grains were included inside the four point probes. The resistivity increased as the number of grain boundaries increased. Our result can contribute to achieve high conversion efficiency of poly-Si solar cell by overcoming the grain boundary influence.

• Nuclear Engineering and Technology
• /
• 제34권2호
• /
• pp.132-141
• /
• 2002

The effects of microstructure on fretting wear were investigated in Inconel 690 tube. The microstructure observation indicated that the solution annealing temperature and time affected the grain size of the Inconel 690 tubes. The carbide morphology, along grain boundaries, was mainly affected by thermal treatment time and temperature. The wear test results showed that specimens with larger grain size and with coarse carbides along grain boundaries had better wear resistance. Cracks were found in specimens with carbides along the grain boundary, while few cracks were found in carbide free specimens. It seemed that the carbides on grain boundary assisted crack formation and propagation in carbide containing specimens. On the other hand, the micro-hardness of specimen did not have a major role in fretting wear. It could be inferred from the SEM images of worn surfaces that the main wear mechanism of carbide containing specimen was delamination, while that of carbide free specimen was abrasion.

• 수산해양교육연구
• /
• 제27권4호
• /
• pp.1118-1128
• /
• 2015

In the midst of the advancement of global economic trade restrictions, the internationalization of domestic agriculture, which has occurred at a time of crisis in the industry, has presented an opportunity for Korea's agricultural products to be exported overseas. In particular, from 2015, after favorable outlooks for Korean rice, it is expected that the domestic agricultural industry is in a strong position to play a major role in export markets. Due to this, among existing measures targeting the import of rice, increasing domestic measures to boost rice exports and establish an effective operating plan are being pursued. However, until now, appropriate measures targeting domestic rice markets have not been found. In addition, domestic grain piers, which are currently used exclusively for the import of grain, do not have sufficient capacity to handle export operations. Therefore this paper will examine the current status of domestic grain piers, and will suggest a operating plan in grain terminal for the export of grain in order to successfully bring domestically produced rice to foreign markets. The conclusions drawn from this paper are designed to be used as a basic application for the operational plan of grain piers for the purpose of increasing domestic rice exports.