• Applied Chemistry for Engineering
• /
• v.5 no.3
• /
• pp.395-405
• /
• 1994

The various functional groups, such as hydroxyl(-OH), carboxyl(-COOH) and quinonic oxygen(OC<) on the carbon black(abbreviated to CB) surface were activated with n-butyl lithium solution in n-hexane and then acrylate and methacrylate monomers were graft polymerized onto these activated anionic sites and CB-grafted polymers were obtained. To separate homopolymers from reaction mixture, non-solvent precipitation method or centrifugal separating method were applied. Subsequently, conversion, grafting ratio and efficiency were determined at various reaction temperatures and times. In case of acrylates, the grafting ratio showed 20~30% but methacrylates showed 150~200%. Also the anion polymerizations between CB and monomers were nearly reached to equilibrium state within one or two hours under each reaction temperatures but conversion and grafting ratio were increased a little with reaction temperature increase. In colloidal dispersion stability test, before heat-drying, the all CB-grafted polymers showed good dispersed stability in good solvents for acrylic and methacrylic homopolymers. Futhermore, CB-polymethacrylates were found to show excellent collidal properties for good solvents of methacrylic homopolymer even after heat-drying. Identification of the grafted polyacrylates and polymethacrylates onto the CB surface was performed by FT-IR spectroscopy. In addition, electric resistance values of CB-grafted polymers were measured by Four-probe method, and the increase of the grafting ratio showed the increase of the surface resistance.

• Journal of Chest Surgery
• /
• v.39 no.8 s.265
• /
• pp.604-610
• /
• 2006

Background: Recent improvements in interventional procedure and medical therapy for congestive heart failure result in an increase of number of patients with ischemic cardiomyopathy considered for coronary artery bypass grafting. We retrospectively review the results of CABG in these patients with decreased LV function to know the early and mid-term follow-up results. Material and Method: Between January 2001 and June 2005, 1,143 patients underwent coronary artery bypass grafting and 144 of these patients had preoperative left ventricular function of equal to or less than 35% ${(LVEF{\leq}\;35%)}$. There were off-pump coronary artery bypass grafting (OPCAB) in 66 cases (45.8%), on-pump beating heart coronary artery bypass grafting in 34 cases (23.6%) and conventional coronary artery bypass grafting in 44 cases (30.6%). The combined operations including mitral annuloplasty were 48 cases in thirty five patients (24.3%). Result: The mean number of dstal anastomosis were $3.5{\pm}1.3$. The median postoperative duration of stay in intensive care unit and hospital was 2 days and 8 days, respectively. There were 6 early death (4.2%) and causes of deaths were ventricular tachycardia in 5 patients, small bowel infarction in one patient. Mean follow-up time was $21{\pm}14$ months $(4{\sim}54\;months)$. The 1-year was $95{\pm}2%$ and 3-year survival rate was $83{\pm}7%$, the 1-year and 3-year cardiac event-free survival were ${88{\pm}3%\;and\;69{\pm}7%}$, respectively. Conclusion: Based on satisfactory early and mid-term results in our study, CABG should be carried out as actively as possible in patients with ischemic cardiomyopathy. Postoperative aggressive management for ventricular arrhythmia would be helpful for better results.

• Polymer(Korea)
• /
• v.34 no.5
• /
• pp.464-468
• /
• 2010

In this study, a vinylbenzyl chloride (VBC) monomer was successfully grafted onto the several fluoropolymer films including poly(tetrafluoroethylene-co-hexafluoropropylene) (FEP), poly(tetrafluoroethylene-co-perfluoropropylvinyl ether) (PFA), and poly(ethylene-co-tetrafluoroethylene) (ETFE) films by using a simultaneous irradiation method. The results indicated that PVBC graft polymer can be easily grafted onto the ETFE film than other fluorinated films under the same irradiation condition. The grafted films were characterized by using FTIR, TGA, and SEM-EDS instruments. The elongation at the breaking of the grafted films was found to decrease with an increase of degree of grafting (DOG). The PVBC-grafted ETFE films were found to have better mechanical properties than other PVBC-grafted fluorinated films.

• Journal of the Korean Applied Science and Technology
• /
• v.25 no.4
• /
• pp.459-468
• /
• 2008

Methyl methacrylate(MMA) was grafted onto microcrystalline cellulose(MCC) with ceric ammonium nitrate(CAN) as a redox initiator at the various conditions. The cellulose triacetate(CTA) composite films added MCC and MMA-grafted MCC powders were prepared on a glass plate. The graft yield(GY) and graft efficiency(GE) of the grafted MCC were calculated with the simple equations by the weight balance method. The double bond of C=O on the grafted MCC surfaces was confirmed by the fourier transform infrared spectroscopy with attenuated total reflection(FT-IT ATR) spectrophotometer. After grafting, the degree of crystallinity of cellulose powders was decresed by judging from x-ray diffraction(XRD) data. Scanning electron microscope(SEM) photos showed the only solvent and CAN solution could change the roughness of MCC powders and the effect of powder dispersions in composite matrix. The tensile strength of MCC/CTA composite films was decreased with increase of MCC powder contents. When 5% grafted MCC was added, the tensile strength of grafted MCC/CTA composite films was increased from 82.3 MPa to 97.2 MPa. The thermal property of powders was also analyzed by the thermogravimetric analysis(TGA).

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.36 no.3
• /
• pp.103-110
• /
• 2014

Purpose: The current gold standard for clinical jawbone formation involves autogenous bone as a graft material. In addition, demineralized dentin can be an effective graft material. Although demineralized dentin readily induces heterotopic bone formation, conventional decalcification takes three to five days, so, immediate bone grafting after extraction is impossible. This study evaluated the effect of vacuum ultrasonic power on the demineralization and processing of autogenous tooth material and documented the clinical results of rapidly processed autogenous demineralized dentin (ADD) in an alveolar defects patient. Methods: The method involves the demineralization of extracted teeth with detached soft tissues and pulp in 0.6 N HCl for 90 minutes using a heat controlled vacuum-ultrasonic accelerator. The characteristics of processed teeth were evaluated by scanning electron microscopy (SEM), and energy dispersive X-ray spectroscopy (EDS). Bone grafting using ADD was performed for narrow ridges augmentation in the mandibular area. Results: The new processing method was completed within two hours regardless of form (powder or block). EDS and SEM uniformly demineralized autotooth biomaterial. After six months, bone remodeling was observed in augmented sites and histological examination showed that ADD particles were well united with new bone. No unusual complications were encountered. Conclusion: This study demonstrates the possibility of preparing autogenous tooth graft materials within two hours, allowing immediate one-day grafting after extraction.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.26-26
• /
• 2012

The hydrophobic nature of the wool surface give rise to difficult penetration of dye molecules. Among all the methods of modification, graft polymerization is an attractive method to impart a variety of functional groups to a polymer. Grafting has been made by irradiating the light on the polymer in the presence of a solvent containing monomer. The energy source commonly used are high-energy electrons, X-rays, UV and visible light. UV irradiation is a relatively low-energy radiation in comparison with others since it has the least possibility to change bulk properties. In the present paper, a photo-reactive dye was synthesized from quinizarin by the reaction with methacryloyl chloride. The synthesized dye was continuously grafted onto wool fabric at room temperature by UV irradiation. Several key parameters including UV energy, dye concentration and pH have been examined to understand their influence on the photoreactive coloration.

• Polymer(Korea)
• /
• v.25 no.6
• /
• pp.848-854
• /
• 2001

The crystallization behavior of poly (ethylene terephthalate) (PET) /ethylene-methyl acrylate-glycidyl methacrylate copolymer (E-MeA-GMA) blend was studied. The extent of reaction and the reaction rate between PET and E-MeA-GMA were measured with torque rheometer, FT-IR and SEM. The effects of the grafting reaction on the crystallization behavior were investigated with DSC and time-resolved light scattering (TR-LS) techniques. The morphological change at the lamellar level was also examined by using a small angle X-ray scattering (SAXS) method.

• Membrane and Water Treatment
• /
• v.8 no.5
• /
• pp.463-481
• /
• 2017

Bacteria have been considered as a major foulant that initiates the formation of biofilm on the polymeric membrane surface. Some polymeric membranes are naturally antibacterial and have low fouling properties, however, numerous efforts have been devoted to improve their antibacterial performance. These modifications are mostly carried out through blending the membrane with an antibacterial agent or introducing the antibacterial agent on the membrane surface by chemical grafting. Currently, a significant number of researches have reported nanocomposite membrane as a new approach to fabricate an excellent antibacterial membrane. The antibacterial nanoparticles are dispersed homogenously in membrane structure by blending method or coating onto the membrane surface. Aim of the modifications is to prevent the initial attachment of bacteria to membrane surface and kill bacteria when attached on the membrane surface. In this paper, several studies on antibacterial modified membranes, particularly for water treatment, will be reviewed comprehensively. Special attention will be given on polymeric membrane modifications by introducing antibacterial agents through different methods, such as blending, grafting, and coating.

• Asian Journal of Turfgrass Science
• /
• v.9 no.1
• /
• pp.1-10
• /
• 1995

This study was carried out to investigate the method of propagation of Lindera erythrocarpa Makino. The results were as follows: 1. After the treatment of warm stratification for 1 month followed by cold stratification for 3 months, the germination ratio of seeds of Lindera erythrocarpa was from 84.6 to 93.6 percent. But, dry stored seeds lose their viability Quickly and should be placed in pretreatment im-mediately. Also, the seeds of control district germinated from 68.6 to 74.6 percent. So it was confirmed that the seed of Lindera erythocaeicarpa was not doubly dormant. 2. Softwood cuttings of Lindera erythrocarpa with 5,000 ppm IBA on August 4. 1992 resulted in the best rooting of 95.0 percentage. 3.Twenty percent of the graft union were obtained in the green wood grafting in Lindera erythrocarpa on June 7, 1993. And five percent of the graft union were obtained in the hard wood grafting in Lindera erythrcoar pa on April 6. 1993.

• Journal of Sericultural and Entomological Science
• /
• v.1
• /
• pp.9-14
• /
• 1960

접목법은 우리나라에 있어서의 유일한 상묘생산의 수단인데도 불구하고 해년 그 성적이 좋지 못하여 그 생산에 지대한 지장을 주고 있는 실정에 비추어 필자는 이의 성묘비율을 향상시킬 수 있는 몇 가지 방도에 대하여 이미 실험을 행한 결과 접목후의 가식일수, 이식심도, 묘포의 피복물, 종목채취시기, 시비량등이 접목의 활착이나 묘목의 생육에 영향이 있음을 보고한바 있거니와 필자는 그후 이접하여 국내 주요 상품종에 대하여 품종상호간에 있어서 활착비율에 어떠한 정도의 차이가 있는가 또는 품종의 차이에 따라서 접목적기에 차이가 있는지의 여부와 아울러서 중부지방에 있어서의 접목의 적기를 조사하고 또 한편 우리나라에서 현재 행하고 있는 주요한 각종접목법에 대하여 그 상호간에 있어서의 활착비율의 차이와 묘목의 생육상태 및 접목법의 차이에 따르는 접목적기등을 알기 위하여 4286년부터 5개년간에 걸쳐서 시험을 계속한 결과 그 성적을 얻었으므로 여기에 그 개요를 보고하려고 하는 것이다. (중략)