• Journal of Sericultural and Entomological Science
• /
• v.20 no.2
• /
• pp.40-44
• /
• 1978

Cerium (IV) ion-initiated graft copolymerizations of acrylonitrile to raw silk were investigated in an effort to carry out sericine-fixation. The change in ceric ammonium nitrate concentration exhibited a maximum in percentage of grafting at 0.003M. Also observed was that the change in nitric acid content in reaction media gave a maximum in percentage of grafting at 0.1M. Percentage of grafting was increased generally with increase in acrylonitrile concentration, reaction time and reaction temperature. Raw silk sericin grafted with acrylonitrile was not de gummed by boiling off test and optimum graft percentage was considered at 20%.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.45 no.4
• /
• pp.220-224
• /
• 2019

Maxillary sinus grafting is a dependable procedure that has been in use for a long time. However, clinical complications often arise. To prevent complications of maxillary sinus grafting, it is necessary to know the contra-indications, both for general implantation and for maxillary bone grafting. In addition, presence of various complications requires careful consideration of treatment method; therefore, dentists should be familiar with the treatment protocols. Complications can be divided into postoperative, immediate postoperative, and delayed postoperative complications. Particularly for the outpatient, it is necessary to quickly distinguish between treatable cases and cases for which transfer is required. The purpose of this review is to discuss the contra-indications, complications, and treatment options for complications of maxillary sinus graft.

• Archives of Plastic Surgery
• /
• v.49 no.3
• /
• pp.405-412
• /
• 2022

Although modern medicine has made great strides in the management of burn injuries, associated complications such as pain, infection, dyspigmentation, and scarring have yet to be fully dealt with. Although skin grafting and meshing are routinely performed on burn patients, this method poses a risk for adverse effects. Activated autologous platelet-rich plasma (aaPRP), which is increasingly used in the field of plastic surgery, contains growth factors beneficial for wound regeneration. Seven cases of burns with varying severity and conditions that were treated with intralesional subcutaneous injection and intravenous aaPRP are presented and discussed herein. This case series indicates that subcutaneous and intravenous aaPRP is a safe procedure with the potential to be an alternative when skin grafting cannot be done or as an adjunct treatment to skin grafting.

• Journal of Chest Surgery
• /
• v.39 no.8 s.265
• /
• pp.604-610
• /
• 2006

Background: Recent improvements in interventional procedure and medical therapy for congestive heart failure result in an increase of number of patients with ischemic cardiomyopathy considered for coronary artery bypass grafting. We retrospectively review the results of CABG in these patients with decreased LV function to know the early and mid-term follow-up results. Material and Method: Between January 2001 and June 2005, 1,143 patients underwent coronary artery bypass grafting and 144 of these patients had preoperative left ventricular function of equal to or less than 35% ${(LVEF{\leq}\;35%)}$. There were off-pump coronary artery bypass grafting (OPCAB) in 66 cases (45.8%), on-pump beating heart coronary artery bypass grafting in 34 cases (23.6%) and conventional coronary artery bypass grafting in 44 cases (30.6%). The combined operations including mitral annuloplasty were 48 cases in thirty five patients (24.3%). Result: The mean number of dstal anastomosis were $3.5{\pm}1.3$. The median postoperative duration of stay in intensive care unit and hospital was 2 days and 8 days, respectively. There were 6 early death (4.2%) and causes of deaths were ventricular tachycardia in 5 patients, small bowel infarction in one patient. Mean follow-up time was $21{\pm}14$ months $(4{\sim}54\;months)$. The 1-year was $95{\pm}2%$ and 3-year survival rate was $83{\pm}7%$, the 1-year and 3-year cardiac event-free survival were ${88{\pm}3%\;and\;69{\pm}7%}$, respectively. Conclusion: Based on satisfactory early and mid-term results in our study, CABG should be carried out as actively as possible in patients with ischemic cardiomyopathy. Postoperative aggressive management for ventricular arrhythmia would be helpful for better results.

• Journal of the Korean Wood Science and Technology
• /
• v.34 no.6
• /
• pp.1-11
• /
• 2006

Grafted tissues were investigated using various microscopic techniques. Pinus thunbergii was used as stock and scion and autografted by cleft graft method. Histochemically, grafting processes can be proceeded by four stages: 1) formation of necrotic layer, 2) proliferation of callus, 3) development of neo-cambium from callus, and 4) restoration of new vascular xylem. Necrotic la yer composed of pectin and lignin was gradually degraded during grafting process and disappeared when new union was formed between stock and scion. A large number of starch and lipid bodies in the cytoplasm were also gradually degraded during grafting process and disappeared at the grafting interface. Nucleus and plasmodesmata were not changed. Bubble-like callus was generated from all living parenchyma cells and from the callus. The tracheary elements differentiated from the callus had either reticulate or pit-like thickenings in the secondary walls with bordered pits. Secondary cell wall thickening occurred toward filing to the void parts between reticulated secondary wall. Tracheids formed in the secondary xylem were short with irregular wall thickness. New secondary xylem cells with swirled shapes, which developed in graft union were oriented horizontally and obliquely to axis of the stem.

• Applied Chemistry for Engineering
• /
• v.10 no.6
• /
• pp.954-959
• /
• 1999

Radiation-induced grafting of 2-hydroxyethyl methacrylate(HEMA), acrylic acid(AAc) and methacrylic acid(MAAc) onto polypropylene microfiltration membrane has been studied. The effect of grafting conditions such as solvent composition(MeOH and $H_2O$) and monomer concentration on the grafting yield in investigated. The highest degree of grafting is obtained at a solvent composition of 25% $H_2O$:75% MeOH for HEMA, pure water for AAc and 50% $H_2O$:50% MeOH for MAAc. Modification of the PP membranes with hydrophilic monomers is shown to cause an increase in the water permeation flux of the membranes. It is found that HEMA is the best monomer to increase the water permeation flux and the highest water permeation flux is obtained at 99% degree of grafting. The water permeation flux of AAc-grafted PP membrane and MAAc-grafted PP membrane is very sensitive to environmental pH and $Cu^{2+}$ ion, but the water permeation flux of HEMA-grafted PP membrane scarcely depends on pH and $Cu^{2+}$ ion.

• Applied Chemistry for Engineering
• /
• v.17 no.3
• /
• pp.303-309
• /
• 2006

In this study, functional anion-exchange membranes have been prepared and characterized to improve the permeation fluxes of the anion and urea for peritoneum dialysis. They were prepared by UV and radiation graft polymerization methods. The separation-membrane prepared by UV graft polymerization showed the highest grafting degree when HEMA and VBTAC were mixed by 1:2 ratio. However, the grafting degree decreased slightly at compositions above the 1:2 ratio because of the disruption of UV penetration caused by build-up of homopolymer. In the case of photo-initiator, the grafting degree increased up to 0.2 wt%, above which it decreased to a small extent. For the two membranes prepared by radiation graft polymerization, the VBTAC/HEMA membrane showed 96% grafting degree for 6 h reaction time and the GMA membrane showed over 100% grafting degree for 2 h reaction time. Anion-exchange membranes were prepared with 113% grafting degree and with DEA and TEA exchange groups. The DEA membrane showed the conversion degree of 70% in 4 h reaction time while the TEA membrane showed 30% in 2 h reaction time. The prepared anion-exchange membranes were permeable to only anions and urea, but not cations.

• Clean Technology
• /
• v.19 no.4
• /
• pp.393-400
• /
• 2013

In this study, Polyethylene wax, which was produced in manufacturing process of high density polyethylene was grafted with maleic anhydride (MAH). The influences of reaction parameters on the graft polymerization as well as the effect of hydrolysis of the anhydride functions were investigated. The results show that the grafting degree increased and conversion of maleic anhydride decreased with an increase in MAH monomer content. This means the highest grafting efficiency for the reaction can be met when MAH monomer content is about 15 wt%. DCP (dicumyl peroxide) and DTBP (di-tert-butyl peroxide) have been used as the initiator and the highest yield of grafting was obtained when the initiator content is about 0.5 wt%. However, It can be seen that the gel content values of this polyethylene wax grafted MAH were below 2%. It was also observed that the grafting degree increased with an increase in reaction temperature and the maximum value was reached 2 hours later. Although MAH functions grafted onto polyethylene wax were mainly in the carboxylic acid forms, some anhydride form of MAH appeared in over 5% of grafting degree. As a result of hydrolysis reaction, it was observed that the conversion of anhydride group into carboxylic acid group was reached up to 10%.

• Journal of Periodontal and Implant Science
• /
• v.45 no.1
• /
• pp.30-35
• /
• 2015

Purpose: Implant beds with an insufficient amount of cortical bone or a loss of cortical bone can result in the initial instability of a dental implant. Thus, the objective of this study was to evaluate the effect of bone cement grafting on implant initial stability in areas with insufficient cortical bone. Methods: Two different circumferential defect depths (2.5 mm and 5 mm) and a control (no defect) were prepared in six bovine rib bones. Fourteen implants of the same type and size ($4mm{\pm}10mm$) were placed in each group. The thickness of the cortical bone was measured for each defect. After the implant stability quotient (ISQ) values were measured three times in four different directions, bone cement was grafted to increase the primary stability of the otherwise unstable implant. After grafting, the ISQ values were measured again. Results: As defect depth increased, the ISQ value decreased. In the controls, the ISQ value was $85.45{\pm}3.36$ ($mean{\pm}standard$ deviation). In circumferential 2.5-mm and 5-mm defect groups, the ISQ values were $69.42{\pm}7.06$ and $57.43{\pm}6.87$, respectively, before grafting. These three values were significantly different (P<0.001). After grafting the bone cement, the ISQ values significantly increased to $73.72{\pm}8.00$ and $67.88{\pm}10.09$ in the 2.5-mm and 5.0-mm defect groups, respectively (P<0.05 and P<0.001). The ISQ value increased to more than double that before grafting in the circumferential 5-mm defect group. The ISQ values did not significantly differ when measured in any of the four directions. Conclusions: The use of bone cement remarkably increased the stability of the implant that otherwise had an insufficient level of stability at placement, which was caused by insufficient cortical bone volume.

• Korean Journal of Organic Agriculture
• /
• v.22 no.4
• /
• pp.657-665
• /
• 2014

This study was carried out to study the effect of eggplant (EG203) grafting and strawberry removal time on succeeding tomato cropping in high temperature season. In non tillage culture, bacterial wilt incidence was 30% and 0% in nongrafting and eggplant (EG203) grafting while 25% in non-grafting and 0% in eggplant (EG203) grafting in tillage culture. Commercial yield was similar in tillage and non-tillage culture using EG-203 grafting as 2,693 kg/10a and 2,657 kg/10a respectively with no difference in soluble solid content and hardness. Strawberry removal time after tomato planting enhanced plant height and internode length in 20days and 30days later removal while no difference in other growth characters. Commercial yield was higher as 1,885 kg/10a in strawberry removal before tomato planting than 1,678 kg/10a in 30days later removal. From this research, strawberry removal time should be determined by considering strawberry price and growth and expecting profit by succeeding tomato cropping.