• Journal of Biosystems Engineering
• /
• 제24권2호
• /
• pp.153-158
• /
• 1999

As a basic research for the development of the automatic grading and sorting system for dried oak mushrooms, the device to acquire both cap and gill side images of mushroom has been developed and neural network based side recognition and quality grading has been proposed via inputting both side images. 20 quality grades have been selected considering the requirement of grade classifications imposed by the mushroom company. Developed DC motor driven‘V’type reversing device for the image acquisition of both side images of mushroom showed more than 95% success. Most error was caused by very small size mushrooms with a radius of around 1cm. However, it required a further research to reduce the reversing time. Grading and side recognition were performed via inputting normalized size factors and average gray levels of $8{\times}8$ grids converted from the raw images of both surfaces to the multi-layer back propagation(BP) network. Accuracy of the grading showed about 88.5% and the total grading time including reversing operation was around 2 seconds.

• 한국가구학회지
• /
• 제19권5호
• /
• pp.307-318
• /
• 2008

Scientific methods for grading urushi lacquer includes general properties (viscosity, pH etc), and quantitative analysis of moisture, urushiol, gum, laccase content etc, and properties of coating layer such as set to touch drying time, gloss, color difference, delamination strength, tensile strength of film. The grading results evaluated by scientific method showed n order with chinese urushi lacquer (E) > domestic urushi lacquer (A) > japanese urushi lacquer (C) > chinese urushi lacquer (D) > domestic urushi lacquer (B). It is different from hose of traditional methods. Therefore, a more accurate grading of urushi lacquer should be ade by combining traditional method with scientific method.

• Steel and Composite Structures
• /
• 제29권5호
• /
• pp.569-578
• /
• 2018

This paper aims to investigate the transient vibration behavior of functionally graded carbon nanotube (FG-CNT) reinforced nanocomposite plate resting on Pasternak foundation under pulse excitation. The plate is considered to be composed of matrix material and multi-walled carbon nanotubes (MWCNTs) with distribution as per the functional grading concept. The functionally graded distribution patterns in nanocomposite plate are explained more appropriately with the layer-wise variation of carbon nanotubes weight fraction in the thickness coordinate. The layers are stacked up in such a way that it yields uniform and three other types of distribution patterns. The effective material properties of each layer in nanocomposite plate are obtained by modified Halpin-Tsai model and rule of mixtures. The governing equations of an illustrative case of simply-supported nanocomposite plate resting on the Pasternak foundation are derived from third order shear deformation theory and Navier's solution technique. A converge transient response of nanocompiste plate under uniformly distributed load with triangular pulse is obtained by varying number of layer in thickness direction. The validity and accuracy of the present model is also checked by comparing the results with those available in literature for isotropic case. Then, numerical examples are presented to highlight the effects of distribution patterns, foundation stiffness, carbon nanotube parameters and plate aspect ratio on the central deflection response. The results are extended with the consideration of proportional damping in the system and found that nanocomposite plate with distribution III have minimum settling time as compared to the other distributions.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 하계종합학술대회논문집
• /
• pp.405-408
• /
• 1998

Due to the large conduction band discontinuity between emitter base, OmGaAs HBT has an advantge to enable the hot electrons to inject into the base. In this paper, InAlGaAs/InGaAs HBT with the various emitter junction gradings and the modified collectors are simulated and analyzed by HMC(hybrid monte carlo) simulator in order to find a optimal structure for the shortest transit time. A minium base transit time (.tau.$_{b}$ ) of 0.21 ps was obtained for HBT with the grading layer, which is parabolically graded from x=1.0 to x=0.5. The minimum collector transit time (.tau.$_{c}$ ) of 0.31ps was found when the collector was modified by inserting p$^{[-10]}$ and p$^{+}$ layers. Thus HBT in combination with the emitter grading and the modified collector layer showed the cut-off frequency (f$_{T}$) of 183GHz.z.z.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 추계학술대회 논문집
• /
• pp.269-269
• /
• 2007

• ETRI Journal
• /
• 제43권5호
• /
• pp.916-922
• /
• 2021

We calculated the correlation between the doping concentration of the charge layer and the multiplication layer for separate absorption, grading, charge, and multiplication InGaAs/InAlAs avalanche photodiodes (APDs). For this purpose, a predictable program was developed according to the concentration and thickness of the charge layer and the multiplication layer. We also optimized the design, fabrication, and characteristics of an APD for 20 Gbps application. The punch-through voltage and breakdown voltage of the fabricated device were 10 V and 33 V, respectively, and it was confirmed that these almost matched the designed values. The 3-dB bandwidth of the APD was 10.4 GHz, and the bit rate was approximately 20.8 Gbps.

• 자원환경지질
• /
• 제34권6호
• /
• pp.627-648
• /
• 2001

Skaergaard 암체의 중대에는 사장석 우세대와 휘석 우세대가 교대하는 macro-rhythmic layers와 modally-graded, rhythmic lace론 비롯한 최소 두 가지 종류 이상의 layering 발견된다 Macro-rhythmic layers는 LS의 중대에서만 빈번히 발견된다. 두게는 0.3에서 3.3m에 이르고 명확한 상하부 경계를 가지며 노두에서 2km 이상 휭으로 연장된다. 자기 macro-rhythmic layer에서는 내부적인 점이층리 구조를 보이지는 않으나 소규모 modally-graded layer 빈번히 발견된다. Modally-graded, rhythmic layer는 LS의 흔히 발견되나 UBS나 MBS에서는 드물게 관찰된다. 두에는 떼서 50cm에 이르고 노두에서 최대 100m 까지 횡으로 연속된다. 횡적으로 갑자기 혹은 서서히 사라지며 종종 기칠 메우기 구조나 사층리 구조를 수반한다. 명확한 하부 경계와 점이적인 상부 경계와 함께 강한 층간 modal grading이나 size grading이 특징이다. 중대 modally-graded layering중 사장석 우세와 휘석 우세 macro-rhythmic layer두개를 상세하게 조사하였다. 일반적으로 사장석 내의 $K_2$O와 Ba, 휘석, 티탄철석, 그리고 자철석 내의 MgO와 FeO*를 제외한 광물성분변이는 보이지 않는다. 티탄철석과 자철석이 풍부한 layer기저에 산출되는 휘석, 티탄철석, 그리고 자철석의 성분은 MgO가 더 많고 FeO*는 더 적은 경향을 보여준다. 이와 같은 성분변이는 기존의 결정과 Fe가 많은 melt의 상호반응의 결과로 생각되며 Layer 기저에서는 상부보다 적은 re-equilibration를 겪은 것으로 생각된다. 개개 상이나 휘석과 oxide의 비와 reequilibration의 정도 간에는 직접적인 상관관계는 보이지 않는다 휘석 우세 layer거 사장석에 비해 사장석 우세 layer 의 사장석은 UBS의 사장석과 유사하게 상대적으로 적은 $K_2$O와 Eu/Sm를 보이며 이는 사장석 우세 layer는 암체 상부에서 유래한 과외의 사장석에 기인함을 시사한다. 사장석 우세 layer는 대류기에 휘석 우세 layer는 비대류기에 형성되었음을 시사한다. $K_2$O가 적은 사장석 우세 layer의 사장석은 layer내로 통과하는 $K_2$O가 풍부한 liquid와의 reequilibration 에 기인한 것으로 생각된다.

• 전자공학회논문지D
• /
• 제36D권3호
• /
• pp.66-74
• /
• 1999

HMC(Hybrid Monte Carlo)시뮬레이션을 이용하여 InAlGaAs/InGaAs HBT의 비평형 고속전송을 해석하였고, 전송시간 및 차단주파수를 향상시키기 위하여 에미터-베이터 이종접합과 콜렉터 구조를 최적 설계 하였다. 시뮬레이션 결과, 에미터 조성경사영역에서 Al 몰비를 xf=1.0에서 xf=0.5로 변화시킬 경우 베이스 전송시간이τb=0.21ps로 가장 짧았다. 콜렉터 전송시간을 단축시킬 목적으로 콜렉터와 베이스 사이에 n\sup +\형 (콜렉터-Ⅰ), I형(콜렉터-Ⅱ), p형(콜렉터-Ⅲ), 콜렉터를 삽입하여 베이스-콜렉터 공간전하영역의 전계분포를 전자의 비평형고속전송을 유지하도록 설계하였다. 콜렉터-Ⅲ 구조에서는 전자의 음이온화된 억셉터가 콜렉터의 전계를 감소시킴으로써 전자가 Γ 밸리에서 먼 거리까지 전송을 가능하게 하여 가장 짧은 콜렉터 전송시간을 나타내었다. 결론적으로 가장 짧은 전송시간 τec는 Al 몰비가 xf=0.5인 에미터 구조와 콜렉터-Ⅲ에서 0.87psec이었고, 차단주파수 ft=183GHz를 나타내었다.

• 한국표면공학회지
• /
• 제31권2호
• /
• pp.91-100
• /
• 1998

NiCrAlY/YSZ(8wt%$Y_2O_3-ZrO_2$) functionally graded thermal barrier coating (FGC) layers on a Co-base superalloy (HAYNESS 188) substrate were fabstrate were fabicated using Ar shielded single torch air plasma spraying method. Functional grading with the stepwise compositional change throughout layer thickness. Microstructural observation trvealed a successful fabrication of NiCrAlY/YSZ FGC. From the results of the curvature measurement, adhesive strength measurement and thermal shock test for the FGC, it was concluded that the optimum conditions of functionally graded coating layer thinkness and compositional pattern exit to enhance the properties of FGC, which is closely related to the internal residual stess distribution witin it.

• Structural Engineering and Mechanics
• /
• 제50권6호
• /
• pp.773-796
• /
• 2014

This paper deals with free vibration analysis of continuous grading fiber reinforced (CGFR) and bi-directional FG annular sector plates on two-parameter elastic foundations under various boundary conditions, based on the three-dimensional theory of elasticity. The plates with simply supported radial edges and arbitrary boundary conditions on their circular edges are considered. A semi-analytical approach composed of differential quadrature method (DQM) and series solution is adopted to solve the equations of motion. Some new results for the natural frequencies of the plate are prepared, which include the effects of elastic coefficients of foundation, boundary conditions, material and geometrical parameters. Results indicate that the non-dimensional natural frequency parameter of a functionally graded fiber volume fraction is larger than that of a discrete laminated and close to that of a 2-layer. It results that the CGFR plate attains natural frequency higher than those of traditional discretely laminated composite ones and this can be a benefit when higher stiffness of the plate is the goal and that is due to the reduction in spatial mismatch of material properties. Moreover, it is shown that a graded ceramic volume fraction in two directions has a higher capability to reduce the natural frequency than conventional one-dimensional functionally graded material. The multidirectional graded material can likely be designed according to the actual requirement and it is a potential alternative to the unidirectional functionally graded material. The new results can be used as benchmark solutions for future researches.