• Title/Summary/Keyword: Gradient Index

Search Result 353, Processing Time 0.023 seconds

The Development of Climax Index by Analysis of Eco-morphological Characters for Major Deciduous Tree Species

  • Kim, Ji Hong;Chung, Sang Hoon;Lee, Jeong Min;Kim, Se Mi
    • Journal of Forest and Environmental Science
    • /
    • v.28 no.4
    • /
    • pp.199-204
    • /
    • 2012
  • This study was conducted to estimate climax index by eco-morphology for major 36 tree and sub-tree species in natural deciduous forests so as to interpret seral position of each species in the forest community. Fourteen eco-morphological characters which were considered to be associated with successional gradient in the forest were selected for the study. Four levels per character for each species were given on a standardized scale of increasing climax, and the index was computed by the proportion of the sum of total scores, expressed by percent values. With calculated mean value of 54.8 for all indices, Carpinus cordata had the highest index value of 90.5, and Populus davidiana recorded the lowest of 13.2. The most climax group, greater than 70 of the index, contained only 8 species, intermediate group, between 41 to 70 of the index, had 23 species, and the most pioneer group, less than 40 of the index comprised 5 species. The result has noticed that the large number of species would take advantage of most diverse resource and niche in the intermediate stage of the sere in the forest. By cluster analysis all 36 species were subjected to be classified into several species groups which had common similar eco-morphological characteristics. The indices were additionally plotted on the two dimensional graph to recognize the positions related to the light absorption factor and reproduction factor. The climax index of tree and sub-tree species developed by this study could be applied to understand the present status of successional stage on the basis of species composition by the method of summing up the indices. And comparison of forest successional stage among various forest communities could be done by summing up the climax indices of composed species in each community. However, this kind of applied methodology should be limited to the forest of similar species composition and site condition.

Development of a Comprehensive Flood Index through Standardizing Distributions of Runoff Characteristics (유출특성 분포함수의 표준화를 통한 종합홍수지수의 개발)

  • Wi, Sung-Wook;Chung, Gun-Hui;Kim, Tae-Woong
    • Journal of Korea Water Resources Association
    • /
    • v.41 no.6
    • /
    • pp.605-617
    • /
    • 2008
  • This study developed a flood index which evaluates runoff characteristics. Runoff characteristics expressed in a hydrograph were reflected in the flood index in the form of characteristic factors such as a rising curve gradient, a peak discharge, a flood response time, and a flood discharge volume prior to peak. This study applied the standardization method to estimate the relative severity of the characteristic factors by transforming the distribution of characteristic factors into the standard normal distribution. The flood index developed in this study is a comprehensive flood index (CFI) which makes up for the weak points of a flash flood index (FFI) in determining relative severities. The CFI was applied to Han River basin and Selma River basin, and was compared with the FFI based on the correlation analysis and the regression analysis. The CFI could comprehensively evaluate flood runoff characteristics because the CFI is not dominated by a specific characteristic factor, and the CFI could explain more efficiently the relationship between rainfall and runoff than the FFI.

Finger-Knuckle Print Recognition Using Gradient Orientation Feature (그레이디언트 방향 특징을 이용한 손가락 관절문 인식)

  • Kim, Min-Ki
    • The Journal of the Korea Contents Association
    • /
    • v.12 no.12
    • /
    • pp.517-523
    • /
    • 2012
  • Biometrics is a study of identifying individual by using the features of human body. It has been studied for an alternative or complementary method for the classical method based on password, ID card, etc. In comparison with the fingerprint, iris, ear, palmprint, finger-knuckle print has been recently studied. This paper proposes an effective method for recognizing finger-knuckle print based on the feature of Gradient orientation. The main features of finger-knuckle print are the size and direction of winkles. In order to extract these features stably, we make a feature vector consisted of Gradient orientations after the preprocessing of enhancing non-uniform brightness and low contrast. Total 790 images acquired from 158 persons have been used at the experiment for evaluating the performance of the proposed method. The experimental results show the recognition rate of 99.69% and the relatively high decidability index of 1.882. These results demonstrate that the proposed method is effective in recognizing finger-knuckle print.

Wind-induced mechanical energy analyses for a super high-rise and long-span transmission tower-line system

  • Zhao, Shuang;Yan, Zhitao;Savory, Eric;Zhang, Bin
    • Wind and Structures
    • /
    • v.34 no.2
    • /
    • pp.185-197
    • /
    • 2022
  • This study aimed to analyze the wind-induced mechanical energy (WME) of a proposed super high-rise and long-span transmission tower-line system (SHLTTS), which, in 2021, is the tallest tower-line system with the longest span. Anew index - the WME, accounting for the wind-induced vibration behavior of the whole system rather than the local part, was first proposed. The occurrence of the maximum WME for a transmission tower, with or without conductors, under synoptic winds, was analyzed, and the corresponding formulae were derived based on stochastic vibration theory. Some calculation data, such as the drag coefficient, dynamic parameters, windshielding areas, mass, calculation point coordinates, mode shape and influence function, derived from wind tunnel testing on reducedscale models and finite element software were used in calculating the maximum WME of the transmission tower under three cases. Then, the influence of conductors, wind speed, gradient wind height and wind yaw angle on WME components and the energy transfer relationship between substructures (transmission tower and conductor) were analyzed. The study showed that the presence of conductors increases the WME of transmission towers and changes the proportion of the mean component (MC), background component (BC) and resonant component (RC) for WME; The RC of WME is more susceptible to the wind speed change. Affected by the gradient wind height, the WME components decrease. With the RC decreasing the fastest and the MC decreasing the slowest; The WME reaches the its maximum value at the wind yaw angle of 30°. Due to the influence of three factors, namely: the long span of the conductors, the gradient wind height and the complex geometrical profile, it is important that the tower-line coupling effect, the potential for fatigue damage and the most unfavorable wind yaw angle should be given particular attention in the wind-resistant design of SHLTTSs

IMRT optimization on multiple slice using gradient based algorithm (Gradient based algorithm을 이용한 multiple slice IMRT optimization)

  • Lee, Byung-Yong;Cho, Byung-Chul;Lee, Seok;Jung, Won-Kyun;An, Seung-Do;Choi, Eun-Kyung;Kim, Jong-Hoon;Jang, Hye-Sook
    • Progress in Medical Physics
    • /
    • v.9 no.4
    • /
    • pp.201-206
    • /
    • 1998
  • IMRT optimization method on multiple slice has been developed by using gradient based algorithm. On about 10-30 CT slices including treatment region of a patient, dose optimization has been performed slice by slice to meet the condition that each organ should be exposed below maximum tolerable doses and that the tumor dose within the range of 100$\pm$5 %. Field size was limited to 8$\times$8 cm$^2$ and in this condition, beam divergence was not taken into account to calculate dose distribution. Total dose distribution was calculated by superposing each beamlet whose dose distribution had been precalculated. In order to investigate beam number dependency, dose optimization was performed for one, three, five, seven, and nine coplanar beams and then each optimization index was evaluated. It is found that optimization time was proportional to number of slices to be optimized, and the most efficient plan was obtained from the case of three-to-seven incident beams with respect to calculation time and optimization index. In conclusion, dose optimization of multiple slice was able to be obtained by repeating dose optimization of single slice under condition that the beam size is not too large to ignore beam divergence. And it turns out that result of dose optimization was so sensitive to the position of isocenter that some method to optimize isocenter position is needed to improve it.

  • PDF

Characteristics of Air Stagnation over the Korean Peninsula and Projection Using Regional Climate Model of HadGEM3-RA (한반도 대기정체의 특성 및 지역기후모델 HadGEM3-RA를 이용한 미래 전망)

  • Kim, Do-Hyun;Kim, Jin-Uk;Kim, Tae-Jun;Byon, Jae-Young;Kim, Jin-Won;Kwon, Sang-Hoon;Kim, Yeon-Hee
    • Atmosphere
    • /
    • v.30 no.4
    • /
    • pp.377-390
    • /
    • 2020
  • Not only emissions, but also atmospheric circulation is a key factor that affects local particulate matters (PM) concentrations in Korea through ventilation effects and transboundary transports. As part of the atmospheric circulation, air stagnation especially adversely affects local air quality due to weak ventilation. This study investigates the large-scale circulation related to air stagnation over Korea during winter and projects the climate change impacts on atmospheric patterns, using observed PM data, reanalysis and regional climate projections from HadGEM3-RA with Modified Korea Particulate matter Index. Results show that the stagnation affects the PM concentration, accompanied by pressure ridge at upper troposphere and weaken zonal pressure gradient at lower troposphere. Downscaling using HadGEM3-RA is found to yield Added-Value in the simulated low tropospheric winds. For projection of future stagnation, SSP5-8.5 and SSP1-2.6 (high and low emission) scenarios are used here. It has been found that the stagnation condition occurs more frequently by 11% under SSP5-8.5 and by 5% under SSP1-2.6 than in present-day climate and is most affected by changes in surface wind speed. The increase in the stagnation conditions is related to anticyclonic circulation anomaly at upper troposphere and weaken meridional pressure gradient at lower troposphere. Considering that the present East Asian winter monsoon is mainly affected by change in zonal pressure gradient, it is worth paying attention to this change in the meridional gradient. Our results suggest that future warming condition increase the frequency of air stagnation over Korea during winter with response of atmospheric circulation and its nonlinearity.

Trophic State Index (TSI), Spatial Gradient Characteristics and the Empirical Models for Eutrophication Evaluations in Daecheong Reservoir (대청호 수질오염 평가를 위한 부영양도 지수산정, 공간적 구배 특성 및 경험적 모델)

  • Kwon, Hyuk-Hyun;An, Kwang-Guk
    • Journal of Environmental Science International
    • /
    • v.23 no.9
    • /
    • pp.1537-1549
    • /
    • 2014
  • The objectives of this study were to analyze reservoir trophic state, based on Trophic State Index (TSI), spatial variation patterns of three zones (riverine, transition, and lacustrine zone), and empirical models through 20-years long-term data analysis. Trophic variables of TP and CHL-a were highest during the summer monsoon, and decreased along the main axis from the riverine to lacustrine zone. In the mean time, TN did not show the trend. Ratios of N:P and Secchi disc transparency (SD) increased from the riverine to lacustrine zone. The analysis of trophic state index (TSI) showed that mean TSI (TP) and TSI (CHL-a) were 62 and 57, respectively, and these values were highest in the transition zone during the summer. This zone should be managed well due to highest lake water pollution. The analysis of Trophic State Index Deviation (TSID) showed that algal growth was primarily limited by light penetration, and this was most pronounced in the monsoon season. The analysis of empirical models showed that the value of $R^2$, based on CHL-SD model, was 0.30 (p < 0.0001) in the transition zone and the $R^2$, based on TP-SD model, was 0.41 (p < 0.0001) in the transition zone.

STUDIES ON THE FRAGILITY OF TOBACCO RAW MATERIAL (잎담배의 부스러짐 특성에 관한 연구)

  • 김기환;유광근;주영석;최영현;김병구
    • Journal of the Korean Society of Tobacco Science
    • /
    • v.8 no.1
    • /
    • pp.13-21
    • /
    • 1986
  • The fragility, which express the fineness index, increased linearly with the moisture content for various tobacco shreds and showed a high correlation to the moisture content. Then, fineness index (FIs) at reference moisture content(l2.5%) was obtained by following equation. FIs=FIm+A(12.5-Mm) A" denote the gradient of simple linear regression equation between the fineness index and moisture content. FIm; the fineness index measured at the standard moisture content(12.5%). The characteristics of fragility concerning with some kinds of tobacco raw materials, stalk position, moisture content and storaged time were investigated. The following results were obtained. 1. The moisture content range of less fragile of tobacco raw material was from 16% to 20%. whereas the rolled process sheet tobacco was from 12% to 16%. 2. The Bright yellow and the paper process sheet tobacco were less fragile than that of the other tobacco raw materials. 3. The leaves were more distant from middle stalk position, and its become more fragile. 4. Physical properties of the storaged tobacco leaves were determined as a function of each storageunction of each storage time. The long-term storaged leaves(more than 3 years) were slightly lighter weight, more fragility and lower equilbrium moisture content than thos of the mid-term storaged leaves.(less than 3 years). 5. Contents of chemical component of the storaged leaves were determined every storage time. The long-term storaged leaves were slightly lower content of nicotine and chlorine than those of mid-term storaged leaves, but contents of crude fiber, total ash and calcium were increased significantly.

  • PDF

Development of Multiple RLS and Actuator Performance Index-based Adaptive Actuator Fault-Tolerant Control and Detection Algorithms for Longitudinal Autonomous Driving (다중 순환 최소 자승 및 성능 지수 기반 종방향 자율주행을 위한 적응형 구동기 고장 허용 제어 및 탐지 알고리즘 개발)

  • Oh, Sechan;Lee, Jongmin;Oh, Kwangseok;Yi, Kyongsu
    • Journal of Auto-vehicle Safety Association
    • /
    • v.14 no.2
    • /
    • pp.26-38
    • /
    • 2022
  • This paper proposes multiple RLS and actuator performance index-based adaptive actuator fault-tolerant control and detection algorithms for longitudinal autonomous driving. The proposed algorithm computes the desired acceleration using feedback law for longitudinal autonomous driving. When actuator fault or performance degradation exists, it is designed that the desired acceleration is adjusted with the calculated feedback gains based on multiple RLS and gradient descent method for fault-tolerant control. In order to define the performance index, the error between the desired and actual accelerations is used. The window-based weighted error standard deviation is computed with the design parameters. Fault level decision algorithm that can represent three fault levels such as normal, warning, emergency levels is proposed in this study. Performance evaluation under various driving scenarios with actuator fault was conducted based on co-simulation of Matlab/Simulink and commercial software (CarMaker).

Durable High Performance Single Layer Anti-Reflective Coatings via Wet UV Curing Technology

  • Thies, Jens;Currie, Edwin;Meijers, Guido;Southwell, John;Chawla, Chander
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 2004.08a
    • /
    • pp.98-100
    • /
    • 2004
  • We report a novel manner for preparing single layer anti-reflective coatings with excellent optical properties (<1% reflection) over a broad wavelength regime. The technology is based upon the self-assembly and UV curing of reactive nano-particles, leading to nano-structured coatings with a gradient in refractive index. The single processing step leading to such coatings is fast, robust and cost effective. Furthermore in this paper we will address the mechanical durability of such nano-structured coatings.

  • PDF