• 한방안이비인후피부과학회지
• /
• 제32권3호
• /
• pp.77-86
• /
• 2019

Objectives : By analyzing symptoms of tinnitus, we tried to find out the relationship between deficiency and excess(虛實) and visceral pattern identification(臟腑辨證). By testing Tinnitus Handicap Inventory(THI), we evaluated the quality of life of people suffering from various aspects of tinnitus, as well as comparing treatment efficiency. Methods : 52 patients were recruited in this study who was ill with tinnitus. They wrote out the questionnaire about tinnitus and the THI. Results : The vast majority of high-grade tiny noise patients are deficiency type(虛症). The vast majority of low-grade roar patients are excess type(實症). Tinnitus persistence and feeling of ear occlusion were prominent in low-grade roar patients. low-grade roar patients suggest that overall quality of life is lower than high-grade tiny noise patients. In terms of treatment efficiency, spleen-stomach weakness(脾胃虛弱)-type, stomach heat(胃熱)-type and phlegm-fire(痰火)-type was higher than kidney essence depletion(腎精虧損)-type and liver qi depression(肝氣鬱結)-type regardless of the aspect of tinnitus. Conclusions : The present study suggests that tinnitus pattern may be helpful in differentiating patients with tinnitus, and the effectiveness of treatment can be predicted through differentiation.

• Journal of Animal Science and Technology
• /
• 제63권5호
• /
• pp.1086-1097
• /
• 2021

This study examined the impact of using total mixed ration (TMR) and concentrate on feed intake, daily gain, carcass yield grade, and carcass quality grade of Hanwoo steers and its subsequent economic efficiency. Thirty six 7-month-old Hanwoo steers were assigned to one of the four treatment groups, and each group was divided into three repeated pens, with each repeated pen comprising three steers. The treatment groups were: 1) separate feeding with commercial concentrate and forage (namely, SCF) for the entire experimental period; 2) TMR feeding for a growing period followed by SCF for the early and late fattening period (namely, TMRGSCF); 3) TMR feeding for growing and an early fattening period followed by SCF for the late fattening period (namely, TMREFSCF); and 4) TMR feeding for the entire experimental period (namely, TMRW). The results showed that the SCF treatment had significantly (p < 0.05) higher feed intake during the growing period than other treatments. In contrast, the total feed intake had little difference during early and late fattening as well as the whole period regardless of feeding strategies. Daily gain showed no difference during the growing period. However, it was significantly higher in SCF and TMREFSCF treatments for the early and late fattening period, respectively (p < 0.05). The daily gain during the total raising period is in the order of TMREFSCF > TMRGSCF > SCF > TMRW. Carcass characteristics, including carcass weight, loin eye muscle area, and carcass yield grade, did not significantly differ among different treatments. However, TMRW treatment, wherein TMR was fed for a long time, showed that the cold carcass weight was less compared with other treatments, but carcass yield grade was higher with thinner backfat. Backfat thickness was in the order of SCF > TMRGSCF > TMREFSCF > TMRW, showing that the thickness reduced with longer TMR feeding (p < 0.05). TMRGSCF, which numerically had a higher carcass quality grade, showed higher economic efficiency, whereas SCF showed low economic efficiency. In conclusion, it was more feasible to apply TMR strategy in the growing and early fattening period and then SCF for the early or late fattening period to improve carcass yield, quality grade, and economic efficiency.

• Journal of Advanced Marine Engineering and Technology
• /
• 제21권2호
• /
• pp.157-165
• /
• 1997

The strength level of welded joint in room temperature and elevated temperature up to $600^{\circ}C$ was investigated in 250 and 300 grade 18% Ni maraging steel sheet welded with electron beam. The results obtained in this study are as follows; 1. Optimum welding heat input was 600J/cm in 1.0mm thickness and the room temperature tensile strength, joint efficiency of welded joint treated with optimum aging condition were found to be about 166kg/$mm^2$, 95% in 250 grade, 189kg/$mm^2$, 92% in 300 grade maraging steel sheet, respectively. 2. Tensile strength of welded joint in room temperature increased slightly by aging after repeated solution heat treatment, but the fracture mode showed a shear. 3. Joint efficiency at a temperature between $540^{\circ}C$and $600^{\circ}C$ found to be about 72% to 55%, but the joint efficiency exceeded about 90% below $300^{\circ}C$. 4. The fracture occurred in most weld metal, and the fracture surface showed a shallow dimple.

• 대한가정학회지
• /
• 제11권1호
• /
• pp.26-43
• /
• 1973

This study was carried out on the Sewbility of Urethane Foam usually used as coldproof lining. The Sewability was estimated with the Puckering Grade and Seam Efficiency according to the thicknes of urethane foam, fineness and material of sewing thread, and the sort of covering fabric. The result shows the following ; 1. The thick foam proportinally shows the low Puckering Grade. 2. Effect on the sewability is small in fineness of sewing thread but large in material. Especially silk thread shows the greatest sewability in foam sewing. When the material of covering fabric is same as that of sewing thread (for example ; p/c fabric and p/c thread) the sewability is excellent in special. 3. Taffeta in covering foam is not suitable to foam sewing, satin and twill show superior sewability without reagrd to the thickness of foam. 4. In case of sewing foam covered with tricot, optimum thickness of foam and fineness of sewing thread through pretest must determine. 5. The thicker foam is the better seam efficiency tends, and Seam Efficiency largely effects to the strength of the sewing thread itself. 6. The seam Efficiency can heighten with the strength of sewing thread in proportion to that of covering fabric.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1969-1974
• /
• 2004

The performance of small cyclone is analysed by an experiment for the purpose of developing a bag-less vacuum cleaner. For the high collection efficiency and low pressure loss cyclone, the effect of cyclone inlet feature must be well understood. Four types of the helical inlet are considered to compare with the normal tangential inlet, and also various inlet velocities are used to each inlet type. Based on the reference dimension, each type of inlet shows the changes of the grade efficiency and pressure loss which determine the cyclone quality. The results show that the helical inlet has the smaller cut-size but bigger pressure loss than the tangential inlet. And the degree of opening area influences factors of cyclone performance. As the inlet velocity is increased, the cut-size becomes smaller and the pressure loss becomes bigger of each cyclone. Further studies are required to understand the optimized helical inlet of cyclone.

• Fisheries and Aquatic Sciences
• /
• 제13권2호
• /
• pp.150-156
• /
• 2010

The separation performance of a low-pressure hydrocyclone (LPH) was evaluated for suspended-solids removal in a recirculating aquaculture system (RAS). The dimensions of the LPH were 335 mm cylinder diameter, 575 mm cylinder height, 60 mm overflow diameter, 50 mm underflow diameter, and $68^{\circ}$ cone angle. The inflow rate varied (400, 600, 800, and 1,000 mL $s^{-1}$) with 25%, 25%, 20%, and 10% of bypass ($R_f$), respectively. The maximum total separation efficiency (Et) and reduced separation efficiency (E't) for suspended solids from the effluent of the second settlement tank (before biofiltration) were 58.9% and 45.2%, respectively, at an inflow rate of 600 mL $s^{-1}$ and 25% of $R_f$. The maximum Et and E't for suspended solids from the water supply channel (after biofiltration) were 24.4% and 16%, respectively, at an inflow rate of 1,000 mL $s^{-1}$ and 10% of $R_f$. The maximum grade efficiency (Ei) was 51.6% for a 300 ${\mu}m$ particle size at an inflow rate of 600 mL $s^{-1}$ with 23% of $R_f$. The maximum reduced grade efficiency (E'i) was 37.6% for a 300 ${\mu}m$ particle size at an inflow rate of 1,000 mL $s^{-1}$ with 11% of $R_f$. The results indicate that the separation performance of the LPH for suspended solids removal was size selective and that maximum removal occurred at particle sizes ranging from 300 to 500 ${\mu}m$.

• 디지털융복합연구
• /
• 제14권3호
• /
• pp.135-141
• /
• 2016

이 연구의 목적은 융복합 e-비즈니스 평가요소인 학습이해도, 서비스품질, 효율성의 관계를 분석하는 것이다. 표본은 2015년 11월 2일부터 30일까지 수도권지역의 e-비즈니스 학과 179명을 대상으로 SPSS 22.0 통계 프로그램을 사용하여 ANOVA, t-test 분석을 하였다. 주요 연구의 결과는 다음과 같다. 첫째, 융복합 e-비즈니스 평가요소인 학업이해도, 서비스품질, 효율성에서 성별에 따른 유의한 차이가 발견되었다. 둘째, 학년에 따른 학업이해도, 서비스품질, 효율성에도 유의한 차이가 있는 것으로 나타났다. 이 연구에 대한 시사점으로는 성별, 학년 등 일반적인 특성에 따라 융복합 e-비즈니스에 대한 평가요인에 차이가 있다는 것이고 추후의 연구에서는 일반적 특성에 대한 다양한 변수를 개발할 필요가 있으며, e-비즈니스가 개설된 전국 대학의 일반적 특성에 대한 차이분석을 하여 연구를 보완할 필요성이 있다는 것을 제언한다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.438-438
• /
• 2009

We have investigated the effect of forming gas annealing for Upgraded Metallurgical Grade (UMG)-silicon solar cell in order to obtain low-cost high-efficiency cell using post deposition anneal at a relatively low temperature. We have observed that high concentration hydrogenation effectively passivated the defects and improved the minority carrier lifetime, series resistance and conversion efficiency. It can be attributed to significantly improved hydrogen-passivation in high concentration hydrogen process. This improvement can be explained by the enhanced passivation of silicon solar cell with antireflection layer due to hydrogen re-incorporation. The results of this experiment represent a promising guideline for improving the high-efficiency solar cells by introducing an easy and low cost process of post hydrogenation in optimized condition.

• 한국재료학회지
• /
• 제19권12호
• /
• pp.661-666
• /
• 2009

Froth flotation has been carried out in order to produce roasting-molybdenite concentrate from molybdenite ore in the Shin-yeomi mine. In our study, roasting-molybdenite (Mo 0.43%) from Shin-yeomi mine was recovered by varying the conditions of regrinding time, dosage of collector and alkalinity. Liberation and flotation efficiency more were effective at regrinding time of six minutes than at single grinding. Mo recovery curves increased considerably as dosage of kerosene increased, whereas Mo grade curves decreased gradually. The separation efficiency of molybdenite was effective when the dosage of collector (kerosene) was adjusted to 300 g/t. The molybdenite concentrate was agglomerated in the range of pH 5-7 and its separation efficiency increased to pH 9-10. The concentrate of 49.5% Mo grade ($MoS_2$, 82.6%) with 81.5% recovery from Shin-yeomi molybdenite ores was obtained under conditions of 20% pulp concentration, 300 g/t kerosene 325 g/t frother (AF65), 2.5 kg/t depressant ($Na_2SiO_3$), pH 9-10 and four cleaning times. In the future, a trial run that can separate up to 50% Mo grade from Shin-yeomi molybdenite ores will be performed.

• 한국수소및신에너지학회논문집
• /
• 제31권1호
• /
• pp.105-111
• /
• 2020

The organic Rankine cycle (ORC) and the Kalina cycle system (KCS) are being considered as the most feasible and promising ways to recover the low-grade finite heat sources. This paper presents a comparative exergetical performance analysis for ORC and Kalina cycle using ammonia-water mixture as the working fluid for the recovery of low-grade heat. Effects of the system parameters such as working fluid selection, turbine inlet pressure, and mass fraction of ammonia on the exergetical performance are parametrically investigated. KCS gives lower lower exergy destruction ratio at evaporator and higher second-law efficiency than ORC. The maximum exergy efficiency of ORC is higher than KCS.