• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.28 no.3
• /
• pp.262-273
• /
• 1992

In this study, we selected a DC servo motor as an actuator of the marine diesel engine governor and constructed the position control system of the DC servo motor using the algorithm proposed by authors. Next, we proposed an another method to construct an adaptive control system for marine diesel engine by regarding the controlled system including the DC servo motor as a second order controlled system and verified the validity of this method through the real time control responses. Finally, the results have shown a good response characteristic.

• Proceedings of the KIEE Conference
• /
• 2001.07a
• /
• pp.295-297
• /
• 2001

This paper deals with dynamic study of co-generator system with derived dynamic models of generator, excitation system, and turbine/governor from field tests. Mainly this study concentrates on frequency control of demand users that have co-generator by under-frequency relay. We simulates dynamic study of co-generator system using EMTDC.

• Proceedings of the KIEE Conference
• /
• 1989.11a
• /
• pp.332-336
• /
• 1989

This paper describes the nonlinear analysis and effectual operation methods of thermal power plant turbine control system. When the turbine control governor system has dead-zone characteristic, the effectual frequency development control is difficult, because turbine output does not correspond to frequency deviation in dead-zone. Therefore to obtain effectual correspondance, the turbine dead-zone characteristic must be analyzed by proper method. This paper proposes this nonlinear analysis and effectual plant operating load.

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10b
• /
• pp.607-612
• /
• 1987

This study is concerned with the improvement of the Automatic Boiler Control and Turbine Governor system to maintain line - frequency within 60 .+-. 0.1 HZ. This describes the current problems of plant control system, the method and equipments to be developed for each plant based on the experimental test were carried out at field, and, lastly, the results of the study with the progress of it.

• Proceedings of the KIEE Conference
• /
• 1987.11a
• /
• pp.114-117
• /
• 1987

This study is concerned with the improvement of the Automatic Boiler Control and Turbine Governor system to maintain line - frequency within $60{\pm}0.1\;HZ$. This describes the current problems of plant control system, the method, and equipments to be developed for each plant based on the experimental test were carried out at field, and, lastly, the results of the study with the progress of it.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.15 no.4
• /
• pp.9-16
• /
• 2007

Tilt rotor aircraft can take off and land vertically and cruise faster than any other helicopter. A scaled flight demonstration model of a tilt rotor aircraft has been developed by KARI. Because the flight characteristics of tilt rotor are not well known, the developed scaled model would be helpful to evaluate flight control algorithm of a full scale aircraft. The tethered hover test has been performed in order to improve hover flight characteristics of tilt rotor aircraft prior to flight test of the small scaled model. During the tethered hover test, the performance of rotor speed governor, rate SAS (Stability Augmentation System) and control surface mixers have been evaluated. We expect that the results of real flight hover test would be quite same as tethered hover test. Therefore the tethered hover test results will reduce the risk of flight test properly by fixing some of hidden problems which might occur during the flight test. This paper presents the results of tethered hover test in detail and shows how it could be final ground test before flight test. The control mixer gain and rate SAS feedback gains were modified in order to get higher controllability and stability during the tethered hover flight. The rotor governor showed that it could keep rotor RPM constant with very small deviation even during severe pilot collective input change. The tethered hover test results gave pilot and engineers confirmation and experience about the scheduled flight test.

• Journal of Haehwa Medicine
• /
• v.10 no.1
• /
• pp.471-482
• /
• 2001

Infantile Convulsion, one of common emergency symptoms in pediatrics, arises from sudden derangement of the central nerve system, and can cause a sudden loss of consciousness and spasm. It falls into three categories: Acute Infantile Convulsion, Chronic Infantile Convulsion and Chronic Spleen Convulsion. According to research, approximately 6~7% of all babies undergo spasm more than once. Since the treatment must be done immediately, acupuncture & moxibustion treatment can be one of the most important treatments in this Particular case. Therefore, the focus of this study is on how acupuncture & moxibustion can be utilized in the treatment of Infantile Convulsion, and the literary findings are as follows: 1. The meridian points used on acute infantile convulsion are Sugu(GV26), T'aech'ung(Liv3), Hapkok(LI4). 2. The meridians used on acute infantile convulsion are Governor Vessel(GV), Bladder Meridian(BL), Stomach Meridian(ST). 3. The meridian points used on accompanied symptoms with acute infantile convulsion are Haenggan(Liv2), Yangnungch'on(Liv3) on spasm, Paek'oe(GV14) on opisthotonus, Kokchi(LI11), Taech'u(GV14) on fever, Nogung(P8), Yongch'on(K1) on fainting spell, Chok-samri(S36) on body weakness. 4. The meridian points used on chronic infantile convulsion are Shinguol(CV8), Ch'onchj'u(S25), T'aech'ung(Liv3), Kwanwon(CV4), Ch'ukt'aek(L5). 5. The meridians used on chronic infantile convulsion are Conception Vessel(CV), Governor Vessel(GV), Stomach Meridian(ST). 6. The meridian points used on accompanied symptoms with chronic infantile convulsion are Ch'onchj'u(S25), Kolli(CV11) on diarrhea, Taenung(P7), Shinmun(H7) on fainting spell, Kansu(B18), T'aech'ung(Liv3) on spasm. 7. The meridian Points and meridians are Paek'oe(GV14), Sangsung(GV23), Sugu(GV26) of Governor Vessel(GV) and Choiyung(CV16), Shinguol(CV16) of Conception Vessel(CV) and Taedon(Liv1), Changmun(Liv13).

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.5
• /
• pp.617-625
• /
• 2018

Since FERC order 755 was published, each frequency regulation market rules of the North American ISO/RTO have been revised in many parts. In 2016, the domestic CBP market has also changed its market rules to allow ESS to participate in the frequency regulation reserve services(Governor Free and Automatic Generation Control). This paper compares and analyzes the changed North American ISP/RTO market and domestic CBP market rules. In particular, we compare PJM and CAISO frequency regulation market pricing mechanism and settlement rules with the settlement rules of the domestic CBP market and compare the factors of each market used to compensate the participating resources in terms of resource dependency and accuracy.

• Journal of architectural history
• /
• v.16 no.3
• /
• pp.115-131
• /
• 2007

Jeong Woo-tae(?-1809) was a military official who had worked as Byeol-Gan-Yeok in the governmental construction works during the late 18th century through the early 19th century. Byel-Gan-Yeok, literally a special technician, was an official post in the governmental construction works that carries specific technical tasks from the mid 18th century. Over 30 years, Jeong Woo-tae had devoted himself in the construction of various royal tombs, city walls, and palace buildings. He showed superb and various techniques in the works of stone carving and architectural details. After finishing the construction of the tomb of King Jeong-jo's father successfully, he was appointed as a governor of a rural town. Being on duty of the governor, he used to participate in the construction works as a technician. He also made a couple of innovative devices in the field of construction, like a carrying apparatus, Byel-Nok-No. His works secured the setting up of the post of Byel-Gan-Yeok in the governmental construction system in the 19th century. But his technical achievement remained as his own private works rather than developing to the universal growth of the craftsmen's skill. This might be a limitation of the Byel-gan-Yeok's role, whose position was remained in the midway between official and craftsman.

• Asian Journal of Business Environment
• /
• v.8 no.1
• /
• pp.23-29
• /
• 2018

Purpose - The purpose of this research is to make a comparative assessment of People Credit Funds (PCFs) ranking in Vietnam between the Circular No. 42/2016/TT-NHNN dated December 20, 2016 with the Decision No. 14/2007/QD-NHNN dated 09/4/2007 issued by the Governor of the State Bank. Research design, data, and methodology - This study is mainly based on the Circular No. 42/2016/TT-NHNN dated December 20, 2016 and the Decision No. 14/2007/QD-NHNN dated 09/4/2007 issued by the Governor of the State Bank on PCFs ranking. Results - The study paper has shown positive changes in PCFs ranking in Vietnam in accordance with the Circular No. 42/2016/TT-NHNN, such as increasing Capital Adequacy Ratio (CAR), maintaining CAR, improving assets quality, developing indicators of governance, management and control capability. These changes have implications for the development and efficient performance of PCFs in Vietnam. Conclusions - The classification and evaluation of PCFs will contribute to its healthy development. These finding support PCFs to understand more about rating methodology, significance of rating system and the importance of improving their rating. PCFs in Vietnam desire to develop their business effectively, they need to understand exactly and comply fully with regulations related to their field of operations.