• Korean Journal of Radiology
• /
• v.20 no.5
• /
• pp.791-800
• /
• 2019

Objective: To compare various models of diffusion-weighted imaging including monoexponential apparent diffusion coefficient (ADC), biexponential (fast diffusion coefficient [D_f], slow diffusion coefficient [D_s], and fraction of fast diffusion), stretched-exponential (distributed diffusion coefficient and anomalous exponent term [α]), and kurtosis (mean diffusivity and mean kurtosis [MK]) models in the differentiation of renal solid masses. Materials and Methods: A total of 81 patients (56 men and 25 women; mean age, 57 years; age range, 30-69 years) with 18 benign and 63 malignant lesions were imaged using 3T diffusion-weighted MRI. Diffusion model selection was investigated in each lesion using the Akaike information criteria. Mann-Whitney U test and receiver operating characteristic (ROC) analysis were used for statistical evaluations. Results: Goodness-of-fit analysis showed that the stretched-exponential model had the highest voxel percentages in benign and malignant lesions (90.7% and 51.4%, respectively). ADC, D_s, and MK showed significant differences between benign and malignant lesions (p < 0.05) and between low- and high-grade clear cell renal cell carcinoma (ccRCC) (p < 0.05). α was significantly lower in the benign group than in the malignant group (p < 0.05). All diffusion measures showed significant differences between ccRCC and non-ccRCC (p < 0.05) except D_f and α (p = 0.143 and 0.112, respectively). α showed the highest diagnostic accuracy in differentiating benign and malignant lesions with an area under the ROC curve of 0.923, but none of the parameters from these advanced models revealed significantly better performance over ADC in discriminating subtypes or grades of renal cell carcinoma (RCC) (p > 0.05). Conclusion: Compared with conventional diffusion parameters, α may provide additional information for differentiating benign and malignant renal masses, while ADC remains the most valuable parameter for differentiation of RCC subtypes and for ccRCC grading.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.5
• /
• pp.1797-1807
• /
• 2013

Dams always have the possibility of failure due to unexpected natural phenomena. In particular, dam failure can cause huge damage including damage for humans and properties when dam downstream regions are densely populated or have important national facilities. Although many studies have been conducted on the analysis of flood waves about single dam failure thus far, studies on the analysis of flood waves about the sequential failure of dams are lacking. Therefore, the purpose of this study was to calculate the peak discharge of sequential failure of dams through flood wave analysis of sequential failure of dams and this analysis techniques to predict flood wave propagation situation in downstream regions. To this end, failure flood wave analysis were conducted for Lawn Lake Dam which is a case of sequential failure of dams among actual failure cases using DAMBRK to test the suitability of the dam failure flood wave analysis model. Based on the results, flood wave analysis of sequential failure of dams were conducted for A dam in Korea assuming a virtual extreme flood to predict flood wave propagation situations and 2-dimensional flood wave analysis were conducted for major flooding points. Then, the 1, 2-dimensional flood wave analysis were compared and analyzed. The results showed goodness-of-fit values exceeding 90% and thus the accuracy of the 1-dimensional sequential failure of dams simulation could be identified. The results of this study are considered to be able to contribute to the provision of basic data for the establishment of disaster prevention measures for rivers related to sequential failure of dams.

• Journal of the Korean Society of Costume
• /
• v.6
• /
• pp.65-87
• /
• 1982

1. Purpose: The purpose is to apply and adapt ancient textile pattern to practical life, and to contribute to the promotion of the creative development of modernization and Koreanization of textile pattern by the survey of the extent of taste for the textile pattern existent in Korean costume among costumes. 2. Hypothesis: Textile pattern is in most classical one expressed in fact, but nowadays abstract or geometric one is more exist. Consumers are in most part in forties, and so the taste cannot be ignored. Therefore aesthetic consciousness found Korean costume is more important rather than excessively bold or mordern one. 3. Method and Process: (1) This research is analysed 386 one through college student and parents of a primary or high school. (2) Taste of the pattern is comparisoned and analyzed as age. education, pocket money of the student or an income of a month in home through computer. And the analysis of the statistics research is operation through the Chi-Square Goodness of-Fit-Test. 4. Conclusion: (1) The Korean costume put on mostly party or formal dress, therefore it should be researched as an outdoor dress with traditional costume. (2) The most one is concerned in textile pattern, it's taste is different from color, constitution. Textile industry is developed not only weave pattern, gold-coverning pattern but embroidry pattern, dye pattern, therefore the various side of pattern design should be researched. (3) In Side of form, plant pattern is not only most various but highest in popularity. According to approach nowadays, all of the pattern becomes composition or geometric one with abstract tendency and so from these day pattern is necessary combinationed, researched with our people emotion. (4) The color of textile pattern is choiced individual taste. Through investige, research in various side of the modern taste and our costume, we take growing interest in the color, composition of textile, and should dressed with beauty and grace. (5) In side of size, textile pattern is choiced to individual face and body shape through research on form, color, size of these pattern, we should endeavor to dress well. (6) In side of application, most people is concerned in not only interior ornament but the costume is high. Costume research by some people of the outside and symbol with interior through the pattern analysis is not only very important but also is due to people culture.

• Journal of Korean Society of Forest Science
• /
• v.105 no.3
• /
• pp.342-350
• /
• 2016

This study aims to make the stand density management diagram which is very useful for establishing systematic management plan and obtaining management goal in Pinus densiflora forest. To estimate 5 models mainly composed of stand density management diagram, we used total of 1,886 sample plots having more than 75% of the total basal area of the pine trees in each stand. To test the goodness of fit, $X^2$ was computed with a significance level of 5%, and the acceptable error range as 20%. Also standard deviation of the model was $34.59m^3{\cdot}ha^{-1}$, minimum acceptable error range was 16.59% and coefficient of variation was 22.11%. If we use the stand density management diagram, it would be useful to establish the timber yield and thinning plan understanding the pathway of stand density management.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.6 no.1
• /
• pp.119-131
• /
• 2003

Rainfall-runoff process is under the control of hydrologic parameters having temporal and spatial variety. Accordingly, it is difficult to efficiently deal them since many parameters and various information are required to perform hydrologic simulation. So the purposes of this study is to estimate the runoff volume by frequency using GIS techniques and NRCS method. The analysis of frequency rainfall is analyzed using FARD 2002 program and the result of goodness of fit test show that Log-pearson type III is suitable distribute type for the applied area. TOPAZ program used for the analysis of DEM data examining into geological characteristic. NRCS curve numbers estimated using landuse map and soil map for the estimation of effective rain fall in the basin. The storm Type II and Type III were used as the type for the application of NRCS. The result of application show that the runoff volumes above 80 years frequency in return period have similar patterns regardless of Type II and Type III. In addition, the results of comparison with runoff volumes by frequency in the report of river improvement master plan show that it have similar volumes as the relative errors for them of 80, 100 years frequency are each 7.65%, 5.33%.

• The Korean Journal of Applied Statistics
• /
• v.33 no.2
• /
• pp.215-228
• /
• 2020

Under Article 19, Paragraph 1 of the Food Industry Promotion Act, Rural Development Administration renews the Korean foods composition table every five years. Before the publication of the tenth revision of the Korean foods composition table in 2021, this paper suggests methods for collecting representative samples of 182 highly consumed foods in Korea. Food markets are categorized by their distribution channels, which are supermarkets and local markets. Eight samples are collected from each category by applying the National Food and Nutrient Analysis Program (NFNAP)'s stratified multi-stage sampling. The NFNAP was implemented in 1997 as a collaborative food composition research effort between the National Institute of Health (NIH) and the US Department of Agriculture (USDA) to secure reliable estimates for the nutrient content of food and beverages consumed by the US population. Selected supermarkets for selecting representative food samples are Emart Kayang, Homeplus Siheung, Lottemart Dongducheon, Emart Suwon, Lottemart Dunsan, Lottemart Yeosu, Emart Ulsan, and Hanaroclub Ulsan. Selected local markets also are Doksandongusijang in Geumcheon-gu and Pungnapsijang in Songpa-gu, Seoul, Ilsansijang in Ilsanseo-gu, Goyang, Unamsijang in Buk-gu, Gwangju, Beopdongsijang in Daedeok-gu, Daejeon, Bongnaesijang in Yeongdo-gu and Jwadongjaeraesijang in Haeundae-gu, Busan, and Jungangsijang in Jinhae-gu, Changwon.

• Journal of Korea Water Resources Association
• /
• v.44 no.2
• /
• pp.85-96
• /
• 2011

Probability plotting position is generally used for the graphical analysis of the annual maximum quantile and the estimation of exceedance probability to display the fitness between sample and an appropriate probability distribution. In addition, it is used to apply a specific goodness of fit test. Plotting position formula to define the probability plotting position has been studied in many researches. Especially, the GEV distribution which is an important probability distribution to analyze the frequency of hydrologic data was popular. In this study, the theoretical reduced variates are derived using the mean value of order statistics to derived an appropriate plotting position formula for the GEV distribution. In addition, various forms of plotting position formula considering various sample sizes and coefficients of skewness related with shape parameters are applied. The parameters of plotting position formulas are estimated using the genetic algorithm. The accuracy of derived plotting position formula is estimated by the errors between the theoretical reduced variates and those by various plotting position formulas including the derived ones in this study. As a result, the errors by derived plotting position formula is the smallest at the range of shape parameter with -0.25~0.10.

• Journal of the Economic Geographical Society of Korea
• /
• v.13 no.3
• /
• pp.457-469
• /
• 2010

The study aims to estimate interregional trade coefficient of service industry using the gravity model. The gravity model has been widely used for prediction of the level of human interaction between two regions which is positively related to attraction of them and negatively related to the distance between them. To apply the gravity model for explaining the interregional trade flow of service industry, the choice of proper proxy variables which represent a dependent variable and independent variables is most important. However, the literature shows that there are few studies on this issue. Four models concerned to the choice of proxy variables are considered. Finally, this paper employs the least-squares regression analysis to test the model's goodness-of-fit, and suggests the most appropriate model based on the result from the analysis. The result shows that the interregional trade of service industry in regional input-output table developed by The Bank of Korea is desirable as a dependent variable, the service industry output of export region, the population of import region, and the spatial distance between regions are desirable as independent variables.

• Journal of Korea Water Resources Association
• /
• v.43 no.8
• /
• pp.733-745
• /
• 2010

Seasonality of hydrologic extreme variable is a significant element from a water resources managemental point of view. It is closely related with various fields such as dam operation, flood control, irrigation water management, and so on. Hydrological frequency analysis conjunction with partial duration series rather than block maxima, offers benefits that include data expansion, analysis of seasonality and occurrence. In this study, nonstationary frequency analysis based on the Bayesian model has been suggested which effectively linked with advantage of POT (peaks over threshold) analysis that contains seasonality information. A selected threshold that the value of upper 98% among the 24 hours duration rainfall was applied to extract POT series at Seoul station, and goodness-fit-test of selected GEV distribution has been examined through graphical representation. Seasonal variation of location and scale parameter ($\mu$ and $\sigma$) of GEV distribution were represented by Fourier series, and the posterior distributions were estimated by Bayesian Markov Chain Monte Carlo simulation. The design rainfall estimated by GEV quantile function and derived posterior distribution for the Fourier coefficients, were illustrated with a wide range of return periods. The nonstationary frequency analysis considering seasonality can reasonably reproduce underlying extreme distribution and simultaneously provide a full annual cycle of the design rainfall as well.

• Journal of Korean Society of Forest Science
• /
• v.109 no.4
• /
• pp.468-476
• /
• 2020

we developed a stand density management diagram for Quercus variabilis in order to predict the final cutting ages of coppice forests based on management objectives. The sample data were classified into two groups: 603 data points for analysis and 113 data points for verification. Using these data, a stand density management diagram was constructed and a goodness-of-fit test was performed. The explanatory power (R2) of the constituent models for the stand density management diagram was 0.732 for the equivalent height curve and 0.990 for the equivalent diameter curve. According to the analysis of the final cutting age rangeof the highest production, the final cutting ages for 900 buds remaining per hectare was 42-44 years, and that for the 1,800 buds remaining per hectare was 38-42 years. With the third-grade log set as the production target, the final cutting age range with site index 16 and 14 was 25-28 years and 29-33 years, respectively. The results of this study provide baseline data for establishing a management plan for Q. variabilis coppice stands.