• 반도체디스플레이기술학회지
• /
• 제12권2호
• /
• pp.51-56
• /
• 2013

Even if transmissions through normal channel between ubiquitous devices and terminal readers are encrypted, any extra sources of information retrieved from encrypting module can be exploited to figure out the key parameters, so called side channel attack. Since side channel attacks are based on statistical methods, making side channel signal weak or complex is the proper solution to prevent the attack. Among many countermeasures, shielding the electromagnetic signal and adding noise to the EM signal were examined by applying different thicknesses of thin films of ferroelectric (BTO) and conductors (copper and gold). As a test vehicle, chip antenna was utilized to see the change in radiation characteristics: return loss and gain. As a result, the ferroelectric BTO showed no recognizable effect on both shielding and adding noise. Cu thin film showed increasing shielding effect with thickness. Nanometer Au exhibited possibility in adding noise by widening of bandwidth and red shifting of resonating frequencies.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제9권2호
• /
• pp.143-146
• /
• 2004

A surface plasmon resonance (SPR) imaging system was constructed and used to detect the hexahistidine-ubiquitin-tagged human parathyroid hormone fragment (His$\sub$6/-Ub-hPTHF(1-34)) expressed in Escherichia coli. The hexahistidine-specific antibody was immobilized on a thin gold film coated with ProLinker$\^$TM/ B, a novel calixcrown derivative with a bifunctional coupling property that permits efficient immobilizaton of capture proteins on solid matrices. The soluble and insoluble fractions of an E. coli cell lysate were spotted onto the antibody-coated gold chip, which was then washed with buffer (pH 7.4) solution and dried. SPR imaging measurements were carried out to detect the expressed His$\sub$6/-Ub-hPTHF(1-34). There was no discernible protein image in the uninduced cell lysate, indicating that non-specific binding of contaminant proteins did not occur on the gold chip surface. It is expected that the approach used here to detect affinity-tagged recombinant proteins using an SPR imaging technique could be used as a powerful tool for the analyses of a number of proteins in a high-throughput mode.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제3권1호
• /
• pp.19-23
• /
• 1998

We enhanced the sensitivity of surface plasmon resonance biosensor by the conversion of the real-time direct binding immunoassay into the sandwich immunoassay, in which colloidal gold particles coated with anti-mouse IgG was used. By the immobilization of anti-mouse IgG onto the carboxymethyl dextran surface of thin gold film, the direct binding of analyte(mouse IgG) onto the sensor chip, and the injection of colloidal gold particles coated with anti-mouse IgG, about 100 times of sensitivity enhancement was obtained. This result suggests that nanoparticles, which has a high refractive index, homogeneous ultrafine structure and capability of size control, would be applicable for the detection of very small quantity of biomaterial.

• Progress in Superconductivity
• /
• 제9권2호
• /
• pp.188-192
• /
• 2008

We investigated the size effect on quench development in $Au/YBa_2Cu_3O_7$ (YBCO) thin film meander lines on sapphire substrates. The meander lines were fabricated by patterning YBCO films coated with gold layers. The lines were subjected to simulated AC fault current, and immersed in liquid nitrogen during the experiment. After the initial rapid rise, the resistance increased moderately and then slowly. In 4 inch-diameter meander lines, the period during which the resistance increased moderately was considerably longer than in 2 inch-diameter line. Moderate increase of resistance was originated from quench propagation. The film temperature was about 180 K at the point when the propagation was completed. The rate of resistance increase after the quench completion was not affected by the film size.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2000년도 제1회 학술대회 논문집
• /
• pp.69-70
• /
• 2000

There are currently considerable interest in the applications of conjugated polymers, oligomers, and small molecules for thin-film electronic devices. Organic materials have potential advantages to be utilized as semiconductors in field-effect transistors and light-emitting diodes. In this study, pentacene thin-film transistors (TFTs) were fabricated on glass substrate. Aluminums were used for gate electrodes. Silicon dioxide was deposited as a gate insulator by PECVD and patterned by reactive ion etching (R.I.E). Gold was used for the electrodes of source and drain. The active semiconductor pentacene layer was thermally evaporated in vacuum at a pressure of about $10^{-8}$ Torr and a deposition rate $0.3{\AA}/s$. The fabricated devices exhibited the field-effect mobility as large as 0.07 $cm^2/V.s$ and on/off current ratio as larger than $10^7$.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 1999년도 High Temperature Superconductivity Vol.IX
• /
• pp.348-351
• /
• 1999

Cold 층을 입힌 저항형 초전도 한류기의 전류 제한 특성을 통하여 다음과 같은 결론을 얻었다. 고장발생후 3.2 msec 후에 quench가 발생하였으며, 부분적인 quench가 발생한 다음 시간이 지나면서 완전한 quench로 진행되었다. 즉, 선로고장에 따른 quench 발생 후 YBCO 초전도체의 gold층으로 대부분의 전류가 흐르게 되고, quench 되면서 발생하는 열도 대부분 gold층에서 흡수하여저항이 증가하였으며 이에 따른 전류감소, 전압증가 및 소비전력증가가 발생하였다. 인가전압 V$_0$=65 V$_{peak}$이고 R$_0$는 1 ${\omega}$, 그리고 R$_L$을 7.7 ${\omega}$으로 하였을 때 사고모의 위상각 0$^{\circ}$에서 고장발생후 0.9 msec 후인 9.6 A$_{peak}$ 되는 지점에서 quench가 발생하여 13.0 A$_{peak}$의 최대한류전류값을 보인후 11.4 A$_{peak}$의 전류값에서 fast quench가 완료되었다. 이때 quench 시간은0.63 msec 이었다. 저항값은 gold층에서 발생한 열때문에 점진적인 상승을 보이다가 약 3주기후에 일정한 값에 도달하였다. 한류소자의 온도는 약 11 msec 후에 상온에 도달하였으며, 3 주기후인 54 msec에는 150 $^{\circ}C$까지 상승하였다. gold 박막을 입힌 meander line은 임계전류 이상의 전류를 통전하였을 때에 용단되지 않았으며 ??치된 상태에서 3 사이클 이상 유지하였다. 약65 A$_{rms}$가 흘렀을 때에야 ??치후 3 사이클 지나용단되었다. 이러한 YBCO/gold에 의한 초전도한류기의 용량은 gold에 발생하는 열을 gold가감당할 수 있는 전류의 크기와 관련이 있으며, gold층이 YBCO 한류소자가 quench되었을 때 발생하는 열을 효과적으로 분산시킬 뿐만 아니라 전기적으로 shunt 회로 역할을 하고 있음을 확인할 수 있다. 이에 더하여 앞으로 quench 후 한류소자에서 발생할 수 있는 인덕턴스의 저감방안에 대한 설계 및 모델 탐구를 통하여 좀더 효율적인 한류소자 구성에 대한 연구를 병행하고자 한다.

• 접착 및 계면
• /
• 제11권4호
• /
• pp.144-148
• /
• 2010

본 연구에서는 플라즈몬 공명 신호 증폭을 위한 AuNPs의 실리카 표면 개질 및 나노 입자의 안정적인 표면 박막 형성을 목표로 하였다. 직경 10 nm의 AuNPs를 수용액 상에서 제조하였으며, AuNPs 표면에 실리카 층을 단계별로 형성시켰다. Tetraethlyorthosilicate 농도를 조절함으로써 실리카 박막 두께를 조절하였으며, 얻어진 나노 입자들을 수용액 표면에 분산시켜 Langmuir-Blodgett 박막을 제조하였다. 흡광스펙트럼의 변화를 관찰함으로써 AuNPs의 크기 변화를 확인하였으며, 원자 힘 현미경으로 LB 박막의 형성 여부와 표면 균일도를 살펴보았다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 춘계학술대회 논문집 센서 박막재료 반도체재료 기술교육
• /
• pp.7-11
• /
• 2002

In this study, Au thin films were etched with a $Cl_2/Ar$ gas combination in an in an inductively coupled plasma. The etch properties were measured for different gas mixing ratios of $Cl_2/(Cl_2+Ar)$ while the other process conditions were fixed at rf power (700 W), dc bias voltage (150 V), and chamber pressure (15 mTorr). The highest etch rate of the Au thin film was 3500 $\AA/min$ and the selectivity of Au to $SiO_2$ was 4.38 at a $Cl_2/(Cl_2+Ar)$ gas mixing ratio of 0.2. The surface reaction of the etched Au thin films was investigated using x-ray photoelectron spectroscopy (XPS) analysis. There is Au-Cl bonding by chemical reaction between Cl and Au. During the etching of Au thin films in $Cl_2/Ar$ plasma, Au-Cl bond is formed, and these products can be removed by the physical bombardment of Ar ions. In addition, Optical emission spectroscopy (OES) were investigated to analyze radical density of Cl and Ar in plasma. The profile of etched Au investigated with scanning electron microscopy (SEM).

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(2)
• /
• pp.115-118
• /
• 2000

Uncooled pyroelectric infrared detectors based on BST(B $a_{-x}$S $r_{x}$Ti $O_3$) thin films have been fabricated by RF magnetron sputtering and surface Micromachining technology. The detectors form BST thin film ferroelectric capacitors grown by RF magnetron sputtering on N/O/N(S $i_3$ $N_4$/ $SiO_2$/S $i_3$ $N_4$) membrane. The sputtered BST thin film exhibits highly c-axis oriented crystal structure that no poling treatment for sensing applications is required. This is an essential factor to increase the yield for realization of an infrared image sensor. surface-Micromachining technology is used to lower the thermal mass of the detector by giving maximum sensor efficiency Gold-black is evaporated on top of the sensing elements used the thermal evaporator. fabricated uncooled pyroelectric infrared detectors is highly output voltage at the low temperature(1$^{\circ}C$).).).

• International Journal of Air-Conditioning and Refrigeration
• /
• 제10권1호
• /
• pp.1-9
• /
• 2002

Effects of temperature coefficients fur dielectric constants on transient reflectances and thermal responses have been investigated for a metal(gold) thin-film during ultrashort pulse laser heating. Heating processes are simulated using the conventional conduction model(parabolic one-step, POS), the parabolic tow-step model(PTS), the hyperbolic two-step model(HTS). Results fro the HTS model are very similar to those from the PTS model, since the laser heating time in this study is considerably greater than the electron relaxation time. PTS and HTS models, however, result in completely different temperature profiles from those obtained by the POS model due to slow electron-lattice interactions compared to laser pulse duration. Transient reflectances are directly estimated from the linear relationship between electron temperature and complex dielectric constants, while conventional approaches assume that the change in reflectances is proportional to that in temperatuer. Reflectances at the front surface vary considerably for various dielectric constants, while those at the rear surface remain unchanged relatively.