• Journal of the Korean Wood Science and Technology
• /
• v.14 no.2
• /
• pp.29-35
• /
• 1986

This study was carried out to examine the effect of aluminium sulfate addition to the alkali-acid catalyst phenolic resin for the manufacture of the kapur (Dryobalanops spp.) plywood on the reduction of phenolic resin spreading. On the manufacture of plywood, Adhesive Contents such as 50g/$m^2$, 75g/$m^2$ and 150g/$m^2$ were treated. The spreading adhesive content of 50g/$m^2$ and 75g/$m^2$ had been controlled to about 150g/$m^2$ added with the water in order to get sufficient spreading and controlled to pH 4.5 with aluminium sulfate [$Al_2(SO_4)_3$]. The results are summarized as follows: 1. Specific gravities of air dried plywood manufactured from each adhesive ranged from 0.77 to 0.86 and their moisture contents met the KS requirements. 2. In dry and wet shear strengths, 150 $P_{Al{\cdot}Ac}$ adhesive showed the highest and 75 $P_{Al{\cdot}Ac{\cdot}Am}$ adhesive indicated higher value than 150 $P_{Al{\cdot}Ac}$ adhesive. 3. In case of glue shear strength after boiling test, 150 $P_{Al{\cdot}Ac}$ adhesive was the best and adding of aluminium sulfate was not effective on reinforcement of boiling water resistance of phenolic resin, but met KS requirements. 4. 75 $P_{Al{\cdot}Ac{\cdot}Am}$ adhesive showed the good shear strength and met KS requirements. Therefore, adding of aluminium sulfate was very efficient for economical plywood manufacture.

• KSBB Journal
• /
• v.29 no.3
• /
• pp.183-187
• /
• 2014

Sick-building syndrome occurs when indoor air is polluted with harmful volatile organic compounds such as formaldehyde which are contained in furniture or new building materials. In this study, formaldehyde-shielding chitosangel sheet was developed and its performance was evaluated. Chitosan and agar were dissolved in acetic acid solution. The optimal concentrations of chitosan, acetic acid and agar were 3, 3, and 2.5 %(w/w). Formaldehyde was spreaded on gypsum board and then wall paper was attached on it by using glue. When chitosan-gel sheet was attached on this control board, the amount of formaldehyde released from the board was decreased by 63% than in control board. On the other hand, decrease in formaldehyde releasing was only 32% when liquid solution of chitosan was spreaded on the control board. This result clearly indicates that chitosan-gel sheet removes formaldehyde more effectively than liqud solution of chitosan. Furthermore, this type of sheet is more applicable to new building than spraying type.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.5
• /
• pp.451-458
• /
• 2011

Adhesives derived from renewable resources allow wood panel producers to make lower cost alternatives to formaldehyde-based adhesive resins. Among them, adhesive components extracted from industrial by-products or wastes are the most important research fields in the efficient utilization of waste and cost reduction. In our study, the rapeseed flour, which is a by product from the production of biodiesel extracted from rapeseed, was introduced to develop alternative adhesives for the production of wood flooring. The rapeseed flour was hydrolyzed with 1% sodium hydroxide solution and PF prepolymers were prepared with 3-molar ratios, 1.8, 2.1 and 2.4. The linear fracture mechanics was introduced to evaluate the glue bond quality in wood flooring composed of fancy-veneered and plywood, and the formaldehyde emission and adhesive penetration were also investigated. The formaldehyde emissions of wood flooring met the requirement of the standard of $SE_0$ specified in the KS standard. The rapeseed flour adhesive penetrated sufficiently into the vessel elements and lumens in fancy veneer and plywood and gave strong bond quality to the wood flooring. The fracture mechanics was introduced to evaluate the adhesive joint between fancy veneer and plywood. The critical stress intensity factor ($K_{IC}$) of boliva overlayed wood flooring was increased with increasing molar ratio and this was the same tendency in oak overlayed wood flooring. From the results, the formulated adhesives were efficiently used to bond fancy veneer onto the plywood to make wood flooring and showed a potential to be used as a component of environmentally friendly adhesive resin systems for production of flooring.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.5
• /
• pp.425-436
• /
• 2018

This study was conducted to evaluate the planar (rolling) shear strength of OSB (oriented strand board) panels and domestic plywood through 5 point bending test method in ASTM D2718 standard. The test specimens were prepared in parallel and perpendicular direction to major axis (along the length of panels) and tested up to failure, and failure modes were also examined. From the test results, rolling shear strength were found to be $1.32{\sim}1.94N/mm^2$ in parallel to major axis, and $1.46{\sim}1.99N/mm^2$ in perpendicular to major axis respectively. Little difference was found between parallel and perpendicular direction of rolling shear strength. There were no statistically significant differences in rolling shear strength between Canadian OSB and domestic plywood in the parallel direction, and between Chilean OSB and domestic plywood in the perpendicular direction. The shear failure was observed in all tested OSB panels, whereas shear failure, glue line delamination, and bending combined with shear failure were observed in the domestic plywood.

• Fire Science and Engineering
• /
• v.25 no.3
• /
• pp.91-98
• /
• 2011

This study is about fire resistance performance of wood framed lightweight wall including a middle lintel as a traditional wall form in Korea. The target wall is non-loadbearing system which constructed with $38{\times}89$ mm ($2"{\times}4"$) wood frame and fireproof gypsum board covering, including a middle lintel made of $150{\times}150$ mm section glue-laminated timber. As a test results, all specimens have showed fire resistant performance over 90 minutes and tests were maintained until flame occuring on Specimen-l, 2, 3 at 91 min, 97 min and 98 min respectively. Fire resistance of the heat side gypsum board was 45 minutes and charring rate of middle lintel was equivalant with that of usual timber. The wood stud inside wall system showed relatively quick combution characteristic when exposed to high temperature with no temperature rising delaying time caused by moisture evaporation because of the dehydration preceded during the early period of fire side gypsum board resist to heat.

• Journal of Korean Neurosurgical Society
• /
• v.63 no.4
• /
• pp.455-462
• /
• 2020

Objective : Recent studies have reported that arachnoid plasty (ARP) using gelatin sponges with fibrin glue reduced the occurrence of chronic subdural hematoma (CSDH) following clipping surgery for unruptured intracranial aneurysm (UIA). This meta-analysis was conducted to collate further evidence for the efficacy of ARP in preventing postoperative CSDH. Methods : Data of patients who underwent clipping surgery were extracted from PubMed, EMBASE, and Cochrane Central Register of Controlled Trials by two independent reviewers. A random effects model was used to investigate the efficacy of ARP by using odd ratios (ORs) and 95% confidence intervals (CIs). A meta-regression analysis for male sex was additionally preformed. Results : Data from six studies with 1715 patients were consecutively included. Meta-analysis revealed that ARP was significantly associated with lower rates of CSDH development after surgical clipping for UIA (ARP group vs. control group : 3.2% vs. 7.2%; OR, 0.40; 95% CI, 0.18-0.93; I²=44.3%; p=0.110). Meta-regression analysis did not highlight any modifying effect of the male sex on postoperative CSDH development (p=0.951). Conclusion : This meta-analysis indicated that ARP reduced the incidence rates of CSDH following clipping surgery for UIA. If feasible, ARP would be implemented as an additional surgical technique to prevent postoperative CSDH development during surgical clipping of UIA.

• The Research Journal of the Costume Culture
• /
• v.21 no.4
• /
• pp.596-605
• /
• 2013

The purpose of this study is to classify and recreate the grooming styles of facial hair sported by noblemen during the Joseon Dynasty. Using existent portraits painted during this period as corroborative materials, this study has identified the traditional grooming styles of facial hair sought by noblemen in this age. This study has utilized 30 facial hair styles found in the portraits of noblemen inherited from the Joseon Dynasty, which take up the majority of the portraits currently remaining in Korea. To recreate grooming styles of facial hair, this study has divided facial hair into three types according to its location: beards, moustaches and whiskers. Based on the analysis of these divided grooming styles, this study has recreated grooming styles of facial hair by using artificial modelling heads, artificial hair, artificial glue, scissors, and a comb. The grooming styles of facial hair recreated by this study are closest to those that noblemen sought and did wear during the Joseon Dynasty. The results of this study are as follows. First, they groomed their moustaches in the 八 shape. Next, they wore their beards in the shape of an inverted triangle. Finally, they also grew and groomed whiskers. Though there are individual differences in the location, length, and volume of facial hair, noblemen in the Joseon Dynasty generally sought to wear their facial hair neat and long. Little research has been done to recreate and present noblemen's grooming styles of facial hair focusing on portraits. Thus, the findings of this study are expected to be utilized as basic materials for the education and research of grooming styles of facial hair according to ages. They can also be used as basic materials for recreating facial hair in historical dramas.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.29 no.3
• /
• pp.241-249
• /
• 2007

An augmentation of the maxillary sinus floor facilitates placement of dental implants in the posterior atrophic maxilla. However, a maxillary sinus augmentation has potential complications that can lead to early failure and loss of the bone graft. One specific complication is sinus membrane perforation. Especially, large perforations may cause loss of the graft materials into the sinus and infection, so, early failure of the sinus lift. Attempts at managing sinus membrane perforations are difficult because of the limited access to them and friability of the thin Schneiderian membrane. Repair of sinus membrane perforations intraoperatively may be performed using a variety of techniques and materials, including sutures, collagen membranes, fibrin glue. Inspite of various repair technique, as has been reported extensively in the literature, large perforations represent an absolute contraindication to the continuation of surgery. But, we obtained clinically favorable results in cases that show repair of the perforated sinus membrane with a micro-suture technique by 4X Loupe ($Surgitel^{(R)}$ Loupe, General Scientific Corporation) in large perforation. The objective of this presentation is to report of several cases of repair of the perforated sinus membrane with micro-suture technique using 7.0 or 8.0 suture materials, to make a brief review of the literature about various technique managing perforated sinus membrane.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.43 no.6
• /
• pp.373-387
• /
• 2017

Objectives: The purpose of this study was to introduce our three experiments on bone morphogenetic protein (BMP) and its carriers performed using the critical sized segmental defect (CSD) model in rat fibula and to investigate development of animal models and carriers for more effective bone regeneration. Materials and Methods: For the experiments, 14, 16, and 24 rats with CSDs on both fibulae were used in Experiments 1, 2, and 3, respectively. BMP-2 with absorbable collagen sponge (ACS) (Experiments 1 and 2), autoclaved autogenous bone (AAB) and fibrin glue (FG) (Experiment 3), and xenogenic bone (Experiment 2) were used in the experimental groups. Radiographic and histomorphological evaluations were performed during the follow-up period of each experiment. Results: Significant new bone formation was commonly observed in all experimental groups using BMP-2 compared to control and xenograft (porcine bone) groups. Although there was some difference based on BMP carrier, regenerated bone volume was typically reduced by remodeling after initially forming excessive bone. Conclusion: BMP-2 demonstrates excellent ability for bone regeneration because of its osteoinductivity, but efficacy can be significantly different depending on its delivery system. ACS and FG showed relatively good bone regeneration capacity, satisfying the essential conditions of localization and release-control when used as BMP carriers. AAB could not provide release-control as a BMP carrier, but its space-maintenance role was remarkable. Carriers and scaffolds that can provide sufficient support to the BMP/carrier complex are necessary for large bone defects, and AAB is thought to be able to act as an effective scaffold. The CSD model of rat fibula is simple and useful for initial estimate of bone regeneration by agents including BMPs.

• Korean Journal of Oriental Medicine
• /
• v.2 no.1
• /
• pp.1-25
• /
• 1996

The purpose of this paper is to study the basic medicine of the Gojoseon(古朝鮮) dynasty, especially 5 fields which are the theory of yin-yang(陰陽論), the theory of 5 progressive phasis(五行論), the theory of mind-body(心身論), Seon-gyo(仙敎), acupuncture(鍼術). The theory of yin-yang can be studied in the point of contents of it, not the name of it. Whan-in(桓因) is the god of sky, Woong(熊) is the god of earth. Whan-woong(桓雄), who is the son of Whan-in(桓因), came down from the sky, turned into a man. Woong(熊) lived in the cave, eating garlic and wormwood for 21days, got out of it and turned into a woman. The changes occurred by the mutual aid of Whan-woong and Woong. The theory of 5 progressive phasis can be founded in the archery. The bow and arrow is made of cucumber, horn and ligament of cow, glue made from airbladders of sciaenoid fish, which belong to mock(木). Beejeongbeepal(非丁非八) and make strong one's abdomen(腹實) belong ti soo(水), empty out one's chest(胞虛) belongs to whar(畵), thrusting(前推泰山) belongs to mock(木), shooting(發如虎尾) belongs to geom(金). Basically mind and body have no differance. Mind without body does not exist. Exocism excites the exorcist to the condition of whar(火). There are 3 parts, as treaLment, prevent, regimen, in the medicine. 2 parts as idealism and realism are in regimen. Seon-gyo(仙敎) belongs to the idealism of regimen. In China, is became Taoism(仙敎) later The art of accupunture was developed in the Gulf of pohair(渤海灣).