• Journal of Conservation Science
• /
• v.36 no.2
• /
• pp.112-122
• /
• 2020

The purpose of this study was to find out the correlation through comparative analysis of used materials and manufacturing techniques such as firing characteristics for sherds excavated from celadon kiln site in Punggil-ri, Jangheung. The color difference of the sherds was very wide, and even in the microstructure of the cross section of the glaze layer and the body layer, the celadons, whitewares, blackware, and stonewares could not be characterized because they did not show distinct differences from each other. As a result of estimating the firing temperature through the analysis of constituent minerals and thermal analysis, most of them were estimated to have been fired at 1000℃, but some were fired at high temperatures above 1200℃. It was difficult to clearly distinguish between celadon and whiteware even in the major compositional content of bodies. In the statistical analysis, glaze could be classified three group according to the type of sherds, but the bodies of celadons, whitewares, and blackware classified into one similar group. It is considered that it is not more likely differences in raw materials but some ingredients were removed or added during the purification process. Conclusionally, in this kiln site was found through scientific analysis that there were technical attempts to produce various ceramics, and that the manufacturing techniques and materials of ceramics were in an early stage that was not stabilized.

• Journal of Conservation Science
• /
• v.33 no.2
• /
• pp.131-147
• /
• 2017

The purpose of this study is to analyze the characteristics of Punchong and Whiteware pottery excavated from the kiln site in Dongkok-Town, Gimge. Scientific analysis is carried out to evaluate the physical and chemical properties of the body and glaze. The physical properties indicate the gradual development of the production technology with respect to the kiln operating conditions and period. In chemical properties, the ceramic body is found to be made of raw materials from the same source, but the mixing method depends on the type of Punchong and Whiteware pottery, the production kiln, and period. Whiteware pottery is manufactured with less over 1.3% of the colorant content and more about 1.2% of the $K_2O$ flux content than Punchong pottery. This compositions allow easier vitrification at the same temperature. These characteristics which is low colorant content and high flux content become more prominent as lately. The ceramic glaze is likely to have changed the type of raw materials used after 16~17C, as the contents of MgO, $TiO_2$, MnO, $P_2O_5$ are less three to ten times than 15C.

• Journal of the Korean Ceramic Society
• /
• v.46 no.4
• /
• pp.372-378
• /
• 2009

The coloring agents $Cr_2O_3$ and $CrCl_3$ were manipulated in this study to synthesize ZnO-$Al_2O_3-Cr_2O_3$ system pigments by changing their mixing ratio. The addition of varying amounts of mineralizer was also tested to obtain better color development of the pink pigment. In the synthesis of ZnO- $Al(OH)_3-Cr_2O_3-CrCl_3$ pigments, the best composition is $Cr_2O_3$-0.1 mole and $CrCl_3$-0.2 mole when $Cr_2O_3$ is partially substituted with $CrCl_3$ to synthesize them. Among the $ZnAl_{1.6-x}Cr_{0.2+x}O_4$ compositions to which a mineralizer was not added, ZnO-1mole, $Al(OH)_3$-1.7 mole, $Cr_2O_3$-0.075 mole, and $CrCl_3$-0.15 mole showed a desirable pink hue. The measurements of pigments $L^*$, $a^*$ and $b^*$, were $L^*$ 81.81, $a^*$ 16.65 and $b^*$ 0.45, and when the synthesized pigments were applied to a zinc glaze, the measurements were $L^*$ 60.41, $a^*$ 28.39, and $b^*$ 16.97. When adding a mineralizer, a 2 wt% addition resulted in the most favorable pink color. The composition for the most favorable result that included a mineralizer was $Al(OH)_3$-1.8 mole, $Cr_2O_3$-0.05 mole, and $CrCl_3$-0.1 mole, and the calcination temperature was $1250^{\circ}C$. The pigment color analysis showed $L^*$ 82.52, $a^*$17.14 and $b^*$-1.18, and the measurements of $L^*$, $a^*$ and $b^*$ in the glaze were $L^*$ 60.97, $a^*$ 28.77 and $b^*$ 13.72.

• 보존과학연구
• /
• s.33
• /
• pp.109-124
• /
• 2012

Jangan-eup, located in Busan, South Korea,is a famous pottery-producing area in the Joseon Dynasty period. The aim of this paper was to determine the correlation of the pottery from each kiln site of Jangan-eup by analyzing the ingredients of clay as well as its production technique and firing condition. The materials that were used for the study were fragments of inlaid celadon, white porcelain, and white porcelain painted with underglazed iron excavated from six kiln sites of Jangan-eup:Sil-li, Daeryong-li, Hajangan-li, Sangjangan-li, Yongso-li, and Dumyeong-li. In each of the samples from the six kilns, cristobalite, mullite, and quats were found. The firing temperature distinguished from the crystal structure was higher in the following order: Dumyeongli>Sangjangan-li>Daeryong-li>Hajangan-li>Yongso-li>Sil-li. The samples were divided into four groups based on the ingredients of the clayfound therein: the Sil-li andDaeryong-li group, the Hajangan-li and Sangjangan-li group, the Yongso-li group, and the Dumyeong-li group. It was also found that the sample of Dumyeong-li was made using the most homogeneous clay compared with the other samples. The pottery of Jangan-eup had $40-400{\mu}m$ glaze, had bubbles in their bodies, and had $10-150{\mu}m$ sizes.

• Journal of the Korean Ceramic Society
• /
• v.44 no.11
• /
• pp.639-644
• /
• 2007

Spinel pigments, developing black color in high temperature glazes at oxidation or reduction atmosphere, without CoO because of its high price were synthesized by solid solution method. Ten mixed compositions consisted of NiO, MnO, $Fe_2O_3 and $Mn_2O_3$ were fired at $1250^{\circ}C$ for 1h. The resulting pigments were characterized by using XRD, FT-IR, SEM and UV-vis spectrometer. Structure of the pigments are spinel and particles' shape are spherical or cubic. Glazed tiles containing 5 wt% pigments were fired at $1260^{\circ}C$ and $1240^{\circ}C$ in reduction atmosphere. Color in glazes were analyzed by UV-vis spectrometer. Colors of NiO 0.875 MnO $0.125{\cdot}Fe_2O_3$ $0.4875{\cdot}Cr_2O_3$ $0.50{\cdot}Mn_2O_3$ 0.0125 mole% and NiO 0.875 MnO $0.125{\cdot}Fe_2O_3$ $0.3875{\cdot}Cr_2O_3$ $0.50{\cdot}Mn_2O_3$ 0.1125 mole% in lime glaze showed black in oxidation, in reduction NiO 0.875 MnO $0.125{\cdot}Fe_2O_3$ $0.4875{\cdot}Cr_2O_3$ $0.50{\cdot}Mn_2O_3$ 0.0125 mole% and NiO 0.875 MnO $0.125{\cdot}Fe_2O_3$ $0.4375{\cdot}Cr_2O_3$ $0.55{\cdot}Mn_2O_3$ 0.0125 mole% showed black. In case of lime-barium glaze, NiO 0.875 MnO $0.125{\cdot}Fe_2O_3$ $0.3875{\cdot}Cr_2O_3$ $0.50{\cdot}Mn_2O_3$ 0.1125 mole%, NiO 0.975 MnO $0.075{\cdot}Fe_2O_3$ $0.4375{\cdot}Cr_2O_3$ $0.50{\cdot}Mn_2O_3$ 0.0625 mole% and NiO 0.925 MnO $0.075{\cdot}Fe_2O_3$ $0.4375{\cdot}Cr_2O_3$ $0.50{\cdot}Mn_2O_3$ 0.0625 mole% showed black color in oxidation and NiO 0.875 MnO $0.125{\cdot}Fe_2O_3$ $0.3875{\cdot}Cr_2O_3$ $0.50{\cdot}Mn_2O_3$ 0.1125 mole%, NiO 0.925 MnO $0.075{\cdot}Fe_2O_3$ $0.4375{\cdot}Cr_2O_3$ $0.50{\cdot}Mn_2O_3$ 0.0625 mole% and NiO 0.725 MnO $0.275{\cdot}Fe_2O_3$ $0.4375{\cdot}Cr_2O_3$ $0.50{\cdot}Mn_2O_3$ 0.0625 mole% showed black one in reduction.

• Journal of Conservation Science
• /
• v.35 no.2
• /
• pp.117-129
• /
• 2019

In this study, black-glazed porcelain excavated from the Shinan shipwreck is analyzed to distinguish its characteristics. Glazes of Hong-Tang kiln are thin and exhibit little vitrification, whereas the Ci-Zhou-type and Cha-Yang kilns are similar in terms of their cross section. However, Raman mapping images reveal difference in the distribution area of magnetite. In this study, firing experiments are conducted to determine how iron oxides change properties in black glazes. The results show that when hematite is fired to a temperature greater than $1250^{\circ}C$, it becomes magnetite. Therefore, it is estimated that a firing temperature of approximately $1200^{\circ}C$ is suitable for the Hong-Tang kiln. In addition, glazes of the Ci-Zhou-type and Cha-Yang kilns are fired at approximately $1300^{\circ}C$. However, when the characteristics of firing in ancient kilns are considered, porcelain can be fired for a sufficiently long period to extend to glaze surfaces.

• Economic and Environmental Geology
• /
• v.27 no.1
• /
• pp.11-28
• /
• 1994

The Anyang Feldspar Mine is located in Seoksu Dong, Anyang City, Kyeonggi Do, Korea and has a long exploitation record that is once produced high grade sodium feldspars, for glaze. Geologically, This area is mainly composed of Mesozoic Jurassic biotite granite (Anyang granite) which intruded Precambrian Kyeonggi Gneiss Complex outcroped near the mining area. The deposit is localized on the southwest hill side of Anyang granite batholith and is confined in hydrothemal alteration zone formed by sodium-rich alkali hydrothermal fluids along the fractures of leucocratic granite showing later differentiation facies in the biotite granite. The hydrothermal alteration is characterized by albitization, sericitization, and desilication. The microscopic observation and EPMA, XRD analysis of the feldspar ores show that major minerals are albite and quartz and accessory minerals are orthoclase and sericite, and they are rarely associated with perthite, fluorite, zircon, kaolinite, molybdenite, microcline and iron-oxide. In the REE pattern, the strong negative Eu anomalies of the feldspar ores indicate the influence of feldspar fractionation and show similiar pattern of the host leucocratic granite. The filling temperature of quartz crystals in ore zone ranges from $276^{\circ}C$ to $342^{\circ}C$, and it is inferred that the alteration occurred by the hypothermal solution.

• Journal of environmental and Sanitary engineering
• /
• v.18 no.1
• /
• pp.30-40
• /
• 2003

The study subjects included the workers who were estimated to have been exposed in a low density of lead-laden glaze from pottery manufacturers. They were evaluated in terms of PbB and PbU as indices of lead concentration in the body, and Hb, Hct, ALAD, and FEP as indices of biochemical lead poisoning. Consequently, the study results revealed the relationship between each of indices and its effectiveness to indicate the degree of occupational lead exposure. 1. The mean of PbB was $22.85{\;}{\mu}g/d{\ell}$(range; $4.2~44.7{\;}{\mu}g/d{\ell}$) and PbU $45.69{\mu}g/d{\ell}$(range; $6.7~87.5{\mu}g/d{\ell}$), to indicate the level of lead exposure in the subjects. 2. While there was a high, linear correlation between PbB, PbU and FEP (r=0.835, r=0.855, respectively), a low correlation existed between PbB and ALAD(r=-0.240). 3. While there was a high, linear correlation between PbU and FEP(r=0.825), a low correlation existed between PbU and ALAD(r=-0.352). The above results suggest that FEP can be used as a highly useful biochemical index of lead poisoning, based on its high correlation with PbB and PbU indicating lead concentration in the body.

• Journal of the Korean Ceramic Society
• /
• v.38 no.6
• /
• pp.522-530
• /
• 2001

발굴된 과거 고려청자의 화학성분조성과 물리적 특성에 대한 평가를 하고 미량성분의 청자의 발색에 미치는 영향을 고찰한 결과, 고려 청자 태토는 Fe$_2$O$_3$가 2%, TiO$_2$가 0.8% 함유되어 있었으며, 청자유는 석회.장석유로서 Fe$_2$O$_3$가 1.0~1.2%, TiO$_2$가 0.16% 포함되어 있었다. 비색청자의 경우 미량성분인 MnO$_2$가 P$_2$O$_{5}$의 함량이 0.37%와 0.76%, CuO는 300~500ppm 정도 함유하고 있었다. 반사율 측정 결과 일반적인 청자가 540~570nm의 장파장대에서의 반사율이 급격히 떨어지는데 반하여, 13세기 비색 청자의 것은 적색 파장대에서 10%이상 높았다. CoO는 미량 첨가로도 유약의 청색 파장대 반사율이 높고, 적색 파장대의 반사율이 급격히 떨어지며 청자 발색에 부정적인 영향을 미쳤다. CuO는 0.05%를 첨가했을 경우 적색 파장대에서 반사율 곡선이 높게 나타나고 있어 비색 청자발색에 효과적이었다. 또한 명도를 나타내는 L*값도 CuO가 첨가된 유약이 가장 높았고, 비색청자의 색상은 녹청자에 비해 맑고 깊은 색감을 보였다.

• Journal of the Korean Ceramic Society
• /
• v.46 no.4
• /
• pp.350-356
• /
• 2009

Perovskite codoped with chromium and iron have been studied. Samples with $YAl_{0.96}(Cr_{0.04-x}Fe_x)O_3$(x=0.01, 0.02, 0.03, 0.04) were prepared by solid state reaction at $1450^{\circ}C$ for 6 h and were characterized by XRD, FT-IR, Raman spectroscopy, SEM and UV-vis spectrophotometer. The color of the synthesized pigments were from red to dark brown(in bulk). Up to 0.02 mole $Fe_2O_3$ for substituting $Cr_2O_3$ development of color in lime-glaze gives good red color but as increasing amount of $Fe_2O_3$ and decreasing $Cr_2O_3$ proportionally produce from brownish red to brown. Increasing $Fe_2O_3$ amount lead to weaken crystal field relatively due to have smaller ionic radius than $Cr_2O_3$ ionic one. The UV-vis peaks were shifted to lower wavelength.